-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

BS ISO/IEC/IEEE 12207:2017

Systems and software engineering. Software life cycle processes

Edition date: 2018-03-05
In Force
Available languages: English
Summary:

1.1 Overview

This document establishes a common framework for software life cycle processes, with well-defined terminology, that can be referenced by the software industry. It contains processes, activities, and tasks that are applicable during the acquisition, supply, development, operation, maintenance or disposal of software systems, products, and services. These life cycle processes are accomplished through the involvement of stakeholders, with the ultimate goal of achieving customer satisfaction.

This document applies to the acquisition, supply, development, operation, maintenance, and disposal (whether performed internally or externally to an organization) of software systems, products and services, and the software portion of any system, Software includes the software portion of firmware. Those aspects of system definition needed to provide the context for software products and services are included.

This document also provides processes that can be employed for defining, controlling, and improving software life cycle processes within an organization or a project.

The processes, activities, and tasks of this document can also be applied during the acquisition of a system that contains software, either alone or in conjunction with ISO/IEC/IEEE 15288:2015, Systems and software engineering—System life cycle processes.

In the context of this document and ISO/IEC/IEEE 15288, there is a continuum of human-made systems from those that use little or no software to those in which software is the primary interest. It is rare to encounter a complex system without software, and all software systems require physical system components (hardware) to operate, either as part of the software system-of-interest or as an enabling system or infrastructure. Thus, the choice of whether to apply this document for the software life cycle processes, or ISO/IEC/IEEE 15288:2015, Systems and software engineering—System life cycle processes, depends on the system-of-interest. Processes in both documents have the same process purpose and process outcomes, but differ in activities and tasks to perform software engineering or systems engineering, respectively.

1.2 Purpose

The purpose of this document is to provide a defined set of processes to facilitate communication among acquirers, suppliers and other stakeholders in the life cycle of a software system.

This document is written for acquirers, suppliers, developers, integrators, operators, maintainers, managers, quality assurance managers, and users of software systems, products, and services. It can be used by a single organization in a self-imposed mode or in a multi-party situation. Parties can be from the same organization or from different organizations and the situation can range from an informal agreement to a formal contract.

The processes in this document can be used as a basis for establishing business environments, e.g., methods, procedures, techniques, tools and trained personnel. Annex A provides normative direction regarding the tailoring of these software life cycle processes.

1.3 Field of application

This document applies to the full life cycle of software systems, products, and services, including conception, development, production, utilization, support and retirement, and to their acquisition and supply, whether performed internally or externally to an organization. The life cycle processes of this document can be applied concurrently, iteratively and recursively to a software system and incrementally to its elements.

There is a wide variety of software systems in terms of their purpose, domain of application, complexity, size, novelty, adaptability, quantities, locations, life spans and evolution. This document describes the processes that comprise the life cycle of man-made software systems. It therefore applies to one-of-a-kind software systems, software systems for wide commercial or public distribution, and customized, adaptable software systems. It also applies to a complete stand-alone software system and to software systems that are embedded and integrated into larger, more complex and complete systems.

This document provides a process reference model characterized in terms of the process purpose and the process outcomes that result from the successful execution of the activity tasks. Annex B lists examples of artifacts and information items that may be associated with various processes. This document can therefore be used as a reference model to support process assessment as specified in ISO/IEC 33002:2015. Annex C provides information regarding the use of the software life cycle processes as a process reference model. Annex D describes the process constructs for use in the process reference model. Annex I provides the correspondence between this document and ISO/IEC/IEEE 12207:2008 at the level of process name and process outcome.

1.4 Limitations

This document does not prescribe a specific software life cycle model, development methodology, method, modelling approach, or technique. The users of this document are responsible for selecting a life cycle model for the project and mapping the processes, activities, and tasks in this document into that model. The parties are also responsible for selecting and applying appropriate methodologies, methods, models and techniques suitable for the project.

This document does not establish a management system or require the use of any management system standard. However, it is intended to be compatible with the quality management system specified by ISO 9001, the service management system specified by ISO/IEC 20000‑1 (IEEE Std 20000‑1), and the information security management system specified by ISO/IEC 27000.

This document does not detail information items in terms of name, format, explicit content and recording media. ISO/IEC/IEEE 15289 addresses the content for life cycle process information items (documentation).



ICS:
CTN: IST/15 - IST/15

International Equivalence

Identic ISO/IEC/IEEE 12207:2017

Reemplazo Normas

Reemplaza a BS ISO/IEC 12207:2008

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

 

The use of standards and other content protected by intellectual property rights in AI systems is prohibited. If you are interested in such uses, please contact normas@aenor.com. Failure to comply will result in the withdrawal of your Access licence.

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.