-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

EN ISO 11137-1:2026

Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2025)

Edition date: 2026-06-24
In Force
Available languages: English, French
Summary: 1.1 Dieses Dokument legt Anforderungen für die Entwicklung, Validierung und Lenkung der Anwendung eines Strahlensterilisationsverfahrens für Medizinprodukte fest. ANMERKUNG Obgleich der Anwendungsbereich auf Medizinprodukte begrenzt ist, kann dieses Dokument auch auf andere Produkte und Ausrüstungen angewendet werden. Durch dieses Dokument erfasste Strahlensterilisationsverfahren wenden Bestrahlungsanlagen an: a) die die Radionuklide 60Co oder 137Cs verwenden, b) in denen beschleunigte Elektronen erzeugt werden, oder c) in denen X-Rays (Röntgenstrahlen) erzeugt werden. 1.2 Dieses Dokument ist nicht anwendbar auf Verfahren zur Inaktivierung von Viren oder Verursachern spongiformer Enzephalopathien wie Scrapie, bovine spongiforme Enzephalitis und Creutzfeldt-Jakob-Krankheit. ANMERKUNG Informationen zu solchen Verfahren finden sich in ISO 22442 1, ISO 22442 2, ISO 22442 3, ISO 13022 und ICH Q5A. 1.2.1 Dieses Dokument legt keine Anforderungen zur Kennzeichnung eines Medizinprodukts als steril fest. ANMERKUNG Regionale und nationale Anforderungen können Medizinprodukte als steril kennzeichnen. Siehe zum Beispiel EN 556 1 oder ANSI/AAMI ST67. 1.2.2 Dieses Dokument legt kein Qualitätsmanagementsystem für die Lenkung aller Stufen der Herstellung von Medizinprodukten fest. ANMERKUNG Es ist keine Anforderung dieses Dokuments, dass bei der Herstellung ein vollständiges Qualitätsmanagementsystem vorhanden ist, aber die als Minimum erforderlichen Elemente eines Qualitätsmanagementsystems zur Lenkung des Sterilisationsverfahrens werden an geeigneten Stellen im Text als normative Verweisungen angeführt (siehe im Besonderen Abschnitt 4). Zu beachten sind die Normen über Qualitätsmanagementsysteme (siehe ISO 13485), die alle Stufen der Herstellung von Medizinprodukten lenken einschließlich des Sterilisationsverfahrens. Regionale und nationale Bestimmungen für die Bereitstellung von Medizinprodukten können die Umsetzung eines vollständigen Qualitätsmanagementsystems und die Beurteilung dieses Systems durch eine dritte Seite erfordern. 1.2.3 Dieses Dokument fordert nicht den Einsatz biologischer Indikatoren für die Validierung oder Lenkung der Strahlensterilisation oder dass für die Produktfreigabe eine Prüfung auf Sterilität nach einem Arzneibuch durchgeführt wird. 1.2.4 Dieses Dokument legt keine Anforderungen an den Arbeitsschutz fest, die mit dem Design und dem Betrieb von Bestrahlungsanlagen zusammenhängen. ANMERKUNG In einigen Ländern gibt es Vorschriften über Sicherheitsanforderungen für den Arbeitsschutz im Zusammenhang mit Bestrahlung. 1.2.5 Dieses Dokument legt keine Anforderungen für die Sterilisation gebrauchter oder wiederaufbereiteter Medizinprodukte fest.

1.1       This document specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. NOTE         Although the scope is limited to medical devices, this document can be applicable to other products and equipment. This document covers radiation processes employing irradiators using: a)      the radionuclide 60Co or 137Cs; b)      a beam from an electron generator; or c)       a beam from an X-ray generator. 1.2       This document is not applicable to processes for inactivating viruses or the causative agents of spongiform encephalopathies, such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease. NOTE         For information on such processes, see ISO 22442-1, ISO 22442-2, ISO 22442-3, ISO 13022 and ICH Q5A. 1.2.1       This document does not specify requirements for designating a medical device as sterile. NOTE         Regional and national requirements can designate medical devices as sterile. See, for example, EN 556-1 or ANSI/AAMI ST67. 1.2.2       This document does not specify a quality management system for the control of all stages of production of medical devices. NOTE         It is not a requirement of this document to have a complete quality management system during manufacture, but the elements of a quality management system that are the minimum necessary to control the sterilization process are normatively referenced at appropriate places in the text (see, in particular, Clause 4). Attention is drawn to the standards for quality management systems (see ISO 13485) that control all stages of production of medical devices, including the sterilization process. Regional and national regulations for the provision of medical devices can require implementation of a complete quality management system and the assessment of that system by a third party. 1.2.3       This document does not require that biological indicators be used for validation or monitoring of radiation sterilization, nor does it require that a pharmacopoeial test for sterility be carried out for product release. 1.2.4       This document does not specify requirements for occupational safety associated with the design and operation of irradiation facilities. NOTE         Regulations on safety requirements for occupational safety related to radiation can exist in some countries. 1.2.5       This document does not specify requirements for the sterilization of used or reprocessed devices.

1.1       Le présent document spécifie les exigences relatives à la mise au point, à la validation et au contrôle de routine d’un procédé de stérilisation par irradiation pour les dispositifs médicaux. NOTE         Bien que le domaine d’application se limite aux dispositifs médicaux, le présent document peut être applicable à d’autres produits et équipements. Le présent document couvre les procédés d’irradiation utilisant des irradiateurs, qui utilisent: a)      les radionucléides 60Co ou 137Cs; b)      un faisceau à partir d’un générateur d’électrons; ou c)       un faisceau à partir d’un générateur de rayons X. 1.2       Le présent document n’est pas applicable aux procédés d’inactivation des virus ou des agents responsables des encéphalopathies spongiformes telles que la tremblante du mouton, l’encéphalopathie spongiforme bovine et la maladie de Creutzfeldt-Jakob. NOTE         Pour plus d’informations sur ces procédés, voir l’ISO 22442-1, l’ISO 22442-2, l’ISO 22442-3, l’ISO 13022 et l’ICH Q5A. 1.2.1       Le présent document ne spécifie pas les exigences relatives à la désignation d’un dispositif médical stérile. NOTE         Les exigences régionales et nationales peuvent désigner des dispositifs médicaux stériles. Voir, par exemple, l’EN 556-1 ou l’ANSI/AAMI ST67. 1.2.2       Le présent document ne spécifie pas de système de management de la qualité pour le contrôle de toutes les étapes de production des dispositifs médicaux. NOTE         Il n’est pas exigé par le présent document d’avoir un système de management de la qualité complet durant la fabrication, mais les éléments d’un système de management de la qualité qui sont au minimum nécessaire pour contrôler le procédé de stérilisation sont référencés aux endroits appropriés dans le texte (voir en particulier l’Article 4). L’attention est attirée sur les normes relatives aux systèmes de management de la qualité (voir l’ISO 13485) qui contrôlent toutes les étapes de production des dispositifs médicaux, y compris le procédé de stérilisation. Les réglementations régionales et/ou nationales pour la fourniture de dispositifs médicaux peuvent exiger la mise en place d’un système de management de la qualité complet et l’évaluation de ce système par une tierce partie. 1.2.3       Le présent document n’exige ni l’utilisation d’indicateurs biologiques pour la validation ou la surveillance de la stérilisation par irradiation, ni qu’un essai de stérilité défini dans la pharmacopée soit réalisé pour la libération du produit. 1.2.4       Le présent document ne spécifie pas d’exigences relatives à la sécurité du travail associée à la conception et au fonctionnement des installations d’irradiation. NOTE         Dans certains pays, il peut exister des réglementations sur les exigences relatives à la sécurité au travail liée aux radiations. 1.2.5       Le présent document ne spécifie pas d’exigences relatives à la stérilisation de dispositifs usagés ou retraités.

ICS: 11.080.01-Sterilization and disinfection in general
CTN: CEN/TC 204 - 6185

Otras Relaciones

Acuerdo de Viena ISO 11137-1:2025

Reemplazo Normas

Reemplaza a EN ISO 11137-1:2015/A2:2019

Reemplaza a EN ISO 11137-1:2015

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

 

The use of standards and other content protected by intellectual property rights in AI systems is prohibited. If you are interested in such uses, please contact normas@aenor.com. Failure to comply will result in the withdrawal of your Access licence.

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.