-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

CEN/TR 13801:2014

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation

Edition date: 2014-04-23
In Force
Available languages: German, English
Summary: This Technical Report gives the recommended practice for installation of thermoplastics piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and of soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD"). This Technical Report provides material dependent installation techniques but it is important that the general installation practice as given in the relevant parts of EN 12056 for B application are taken into account in manufacturer's instructions, subject to any applicable national and/or local regulations. This Technical Report is applicable to thermoplastics pipes and fittings as specified in the associated standards EN 1329 1 [1] (PVC-U), EN 1451 1 [2] (PP), EN 1453 1 [3] (PVC-U with structured-wall pipes), EN 1455 1 [4] (ABS), EN 1519 1 [5] (PE), EN 1565 1 [6] (SAN+PVC) and EN 1566 1 [7] (PVC-C), their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following purposes: a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature); NOTE 1 See Clause 4 for waste discharge temperature limits. b) ventilating pipework associated with a); c) rainwater pipework within the building structure (see Figure 1, key 16). It is applicable to pipes and fittings, marked with "B", which are intended to be used above ground only, and to pipes and fittings, marked "BD", which are intended to be used above and buried in ground within the building structure. NOTE 2 Only those components as specified in the relevant associated standard with nominal outside diameters equal to or greater than 75 mm (marked with "BD") are intended for use buried in ground within the building structure. The term "within building structure" covers all gravity discharge pipework within a building, including the elements installed below the slab and buried in the ground. If specified in the relevant associated standard, this Technical Report also covers soil and waste discharge pipework fixed externally onto the building (see Figure 1, key 17). It is not applicable to pipework that passes under the building without any connection from the discharge system. NOTE 3 According to the associated standards, for external above ground soil and waste discharge, additional requirements depending on the climate, will be agreed between the manufacturer and the user. According to the associated standards, components conforming to other standards on plastic piping systems may be used with pipes and fittings conforming to a given associated standard, if they conform to the requirements for joint dimensions and functional requirements of the given associated standard.

Dieser Technische Bericht enthält Empfehlungen für die Verlegung von thermoplastischen Rohrleitungssystemen zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb von Gebäuden (mit „B“ gekennzeichnet) sowie für die Verlegung innerhalb von Gebäuden und erdverlegt innerhalb der Gebäudestruktur (mit „BD“ gekennzeichnet). Dieser Technische Bericht unterscheidet Verlegetechniken in Abhängigkeit vom Werkstoff. Es wird jedoch besonders darauf hingewiesen, dass für allgemeine Verlegetechniken, die für die „B“-Anwendung in den entsprechenden Teilen der EN 12056 angegeben sind, in den Herstelleranleitungen berücksichtigt werden, unter Beachtung der jeweiligen örtlichen und/oder nationalen Vorschriften. Dieser Technische Bericht gilt für thermoplastische Rohre und Formstücke nach den Produktnormen EN 1329-1 (PVC-U), EN 1451-1 (PP), EN 1453-1 (PVC-U mit profilierter Wandung), EN 1455-1 (ABS), EN 1519-1 (PE), EN 1565-1 (SAN+PVC) und EN 1566-1 (PVC-C), für ihre Verbindungen und für Verbindungen mit Bauteilen aus anderen Kunststoffen oder kunststofffreien Werkstoffen zur Verwendung als a) Rohrleitungen zum Ableiten von häuslichem Schmutzwasser (niedriger und hoher Temperatur), ANMERKUNG 1 Für Grenzwerte der Abwassertemperatur siehe Abschnitt 4. b) Lüftungsrohrleitungen in Verbindung mit a), c) Regenwasserleitungen innerhalb der Gebäudestruktur (siehe Bild 1, Nr. 16). Er gilt für mit „B“ gekennzeichnete Rohre und Formstücke für die ausschließlich nicht erdverlegte Verwendung und für mit „BD“ gekennzeichnete Rohre und Formstücke für die erdverlegte und die nicht erdverlegte Verwendung innerhalb der Gebäudestruktur. ANMERKUNG 2 Nur die Bauteile, die nach der entsprechenden Produktnorm einen Nenn-Außendurchmesser von größer oder gleich 75 mm aufweisen (gekennzeichnet mit „BD“), sind für die Erdverlegung innerhalb der Gebäudestruktur vorgesehen. Der Begriff „innerhalb der Gebäudestruktur“ umfasst alle Schwerkraftentwässerungssysteme innerhalb eines Gebäudes einschließlich der Bauteile, die unterhalb der Grundplatte erdverlegt sind. Wenn es in der entsprechenden angegliederten Produktnorm festgelegt ist, umfasst dieser Technische Bericht ebenfalls Rohrleitungssysteme zum Ableiten von Abwasser, die an der Außenseite eines Gebäudes befestigt sind (siehe Bild 1, Nr. 17). Er gilt nicht für Rohrleitungen, die unterhalb des Gebäudes verlaufen und keine Verbindung zu dessen Entwässerungssystem besitzen. ANMERKUNG 3 Nach den entsprechenden angegliederten Produktnormen werden für externe nicht erdverlegte Abwasserableitungen zusätzliche vom Klima abhängige Anforderungen zwischen Hersteller und Anwender vereinbart. Nach den entsprechenden angegliederten Produktnormen können Bauteile, die anderen Normen zu Kunststoff-Rohrleitungssystemen entsprechen, mit Rohren und Formstücken nach einer der angegebenen Produktnorm eingesetzt werden, wenn sie den Anforderungen für Rohrmaße und den funktionalen Anforderungen dieser angegebenen Produktnorm entsprechen.
ICS: 91.140.80-Drainage systems
CTN: CEN/TC 155 - 6137

Reemplazo Normas

Reemplaza a ENV 13801:2000

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

 

The use of standards and other content protected by intellectual property rights in AI systems is prohibited. If you are interested in such uses, please contact normas@aenor.com. Failure to comply will result in the withdrawal of your Access licence.

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.