Filtrar:
AFNOR
NF EN ISO 10705-3
En Vigor
2024-08-14
Water quality - Detection and enumeration of bacteriophages - Part 3:
Validation of methods for concentration of bacteriophages from water
(ISO 10705-3:2003)
AFNOR
NF EN ISO 15923-1
En Vigor
2024-08-14
Water quality - Determination of selected parameters by discrete
analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride,
orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2013)
AFNOR
NF EN 4641-301
En Vigor
2024-08-14
Aerospace series - Cables, optical, 125 µm diameter cladding - Part 301:
Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter -
Product standard
AFNOR
NF EN 2467
En Vigor
2024-08-14
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened -
Plates, sheets and strips - 0,4 mm less than or equal a less than or
equal 20 mm - 520 MPa less than or equal Rm less than or equal 670 MPa
AFNOR
NF ISO 3506-7
En Vigor
2024-08-14
Fasteners - Mechanical properties of corrosion-resistant stainless-steel
fasteners - Part 7 : flat washers with specified grades and property classes
AFNOR
NF EN IEC 62053-41
En Vigor
2024-08-09
Electricity metering equipment - Particular requirements - Part 41 :
static meters for DC energy (classes 0,5 and 1)
AFNOR
NF EN 60317-28/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 28:
Polyesterimide enamelled rectangular copper wire, class 180
AFNOR
NF EN 60317-8/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 8 :
polyesterimide enamelled round copper wire, class 180
AFNOR
NF EN 60317-58/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 58:
Polyamide-imide enamelled rectangular copper wire, class 220
AFNOR
NF EN 60317-57/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 57:
Polyamide-imide enamelled round copper wire, class 220
AFNOR
NF EN 60317-59/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 59:
Polyamide-imide enamelled round copper wire, class 240
AFNOR
NF EN 60317-13/A1
En Vigor
2024-08-09
Specifications for particular types of winding wires - Part 13:
Polyester or polyesterimide overcoated with polyamide-imide enamelled
round copper wire, class 200
AFNOR
FD X15-140
En Vigor
2024-08-07
Measurement of air moisture - Climatic and thermostatic chambers -
Characterisation, verification and monitoring
AFNOR
NF U44-001/A1
En Vigor
2024-08-07
Liming materials - Requirements and technical specifications
AFNOR
NF EN 17955
En Vigor
2024-08-07
Industrial valves - Functional safety of safety-related automated valves
AFNOR
NF A08-655
En Vigor
2024-08-07
Chemical analysis of titanium and titanium alloys - Determination of
aluminium, iron, vanadium and low content elements (B, Co, Cr, Cu, Mn,
Mo, Ni, Si, Sn, Y, Zr) in TiAlV alloy grades - Inductively coupled
plasma optical emission spectrometric method
AFNOR
NF EN 60317-69/A1
En Vigor
2024-08-02
Specifications for particular types of winding wires - Part 69 :
polyester or polyesterimide overcoated with polyamide-imide enamelled
rectangular aluminium wire, class 220
AFNOR
NF EN IEC 60317-27-4/A1
En Vigor
2024-08-02
Specifications for particular types of winding wires - Part 27-4 : paper
tape covered rectangular aluminium wire
AFNOR
NF EN 60317-37/A1
En Vigor
2024-08-02
Specifications for particular types of winding wires - Part 37:
Polyesterimide enamelled round copper wire, class 180, with a bonding layer
AFNOR
NF EN 60317-35/A2
En Vigor
2024-08-02
Specifications for particular types of winding wires - Part 35:
Solderable polyurethane enamelled round copper wire, class 155, with a
bonding layer
