Filtrar:
AFNOR
NF EN 14899
En Vigor
2006-04-01
Characterisation of waste - Sampling of waste materials - Framework for
the preparation and application of a sampling plan
AFNOR
NF EN 12617-4
En Vigor
2002-11-01
Products and systems for the protection and repair of concrete
structures - Test methods - Part 4 : determination of shrinkage and expansion
AFNOR
NF EN 60999-1
Anulada
2000-06-20
Connecting devices - Safety requirements for screw-type and
screwless-type clamping units for electrical copper conductors - Part 1
: general requirements and particular requirements for conductors from
0,5 mm2 up to 35mm2 (included)
AFNOR
AFNOR
NF EN 13920-4
En Vigor
2003-09-01
Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of
one single wrought alloy
AFNOR
NF EN 1748-2-2
En Vigor
2005-02-01
Glass in Building - Special basic products - Part 2-2 : glass ceramic -
Evaluation of conformity/Product standard
AFNOR
AFNOR
AFNOR
NF EN ISO 5183-2
En Vigor
2001-12-01
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2 :
parallel shank fixing for end-thrust electrodes
AFNOR
NF EN ISO 7200
En Vigor
2004-06-08
Technical product documentation — Data fields in title blocks and
document headers
AFNOR
NF EN 3489
En Vigor
2019-12-04
Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500
less than or equal to Rm less than or equal to 750 MPa - Tubes for
structures - 0,5 less than or equal to a less than or equal to 5 mm
AFNOR
NF EN 300138-6
En Vigor
2006-12-01
Integrated Services Digital Network (ISDN) - Digital Subscriber
Signalling System No. one (DSS1) protocol - Close User Group (CUG)
supplementary service - Part 6: abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT) proforma
specification for the network (V1.5.1)
AFNOR
NF EN 2222
En Vigor
2017-12-13
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
AFNOR
NF EN 50065-4-4
En Vigor
2023-03-24
Signalling on low-voltage electrical installations in the frequency
range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter -
Impedance filter
AFNOR
NF EN ISO 12236
Anulada
2006-12-20
Geotextiles and geotextile-related products. Static puncture test (cbr-test).
AFNOR
NF EN 3451
En Vigor
2017-08-02
Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2
forging stock, for annealed forgings - a or D < or = 300 mm
AFNOR
NF EN 300210-6
En Vigor
2001-05-01
Integrated Services Digital Network (ISDN) - Freephone (FPH)
supplementary service - Digital Subscriber Signalling System No one
(DSS1) protocol - Part 6 : Abstract Test Suite (ATS) and partial
Protocol Implementation eXtra Information for Testing (PIXIT) proforma
specification for the network
AFNOR
NF EN 13277-2
En Vigor
2000-11-01
Protective equipment for martial arts - Part 2 : additional requirements
and test methods for instep protectors, shin protectors and forearm protectors
AFNOR
NF EN ISO 13936-1
En Vigor
2004-09-01
Textiles - Determination of the slippage resistance of yarns at a seam
in woven fabrics - Part 1 : fixed opening method
AFNOR
NF T75-506
En Vigor
1999-10-01
Essential oils. Evaluation of non volatile residu content. General gas
chromatographic method on packed and capillary column.
AFNOR
NF EN 14581
En Vigor
2005-07-01
Natural stone test method - Determination of linear thermal expansion coefficient
AFNOR
NF EN 3934
En Vigor
2001-12-01
Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal
for brazing - Amorphous foil
AFNOR
NF EN ISO 3823-1
En Vigor
1999-03-01
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997)
AFNOR
NF EN 10025-1
En Vigor
2005-03-01
Hot rolled products of structural steels - Part 1 : general technical
delivery conditions
AFNOR
NF EN 3010
En Vigor
1998-07-01
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in
heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification :
1210 MPa (at ambient temperature) / 730 degrees Celsius
AFNOR
NF EN 50157-2-1
En Vigor
1999-08-01
Domestic and similar electronic equipment interconnection requirements :
AV.link. Part 2-1 : signal quality matching and automatic selection of
source devices.
AFNOR
AFNOR
AFNOR
NF ISO 12678-2
En Vigor
1997-09-01
Refractory products. Measurement of dimensions and external defects of
refractory bricks. Part 2 : corner and edge defects and other surface imperfections.
AFNOR
NF EN 60512-5-1
En Vigor
2002-07-01
Connectors for electronic equipment - Tests and measurements - Part 5-1
: current-carrying capacity tests - Test 5a : temperature rise
AFNOR
NF EN 2511
En Vigor
2005-11-01
Aerospaces series - Aluminium alloy AL-P7075- - T7351 - Plate - 6 mm
< a < or = 100 mm
AFNOR
NF EN ISO 15983
En Vigor
2003-01-01
Open end blind rivets with break pull mandrel and protruding head - A2/A2
AFNOR
NF EN 13087-3
En Vigor
2000-07-01
Protective helmets - Test methods - Part 3 : resistance to penetration
AFNOR
NF EN 45502-2-3
En Vigor
2010-06-01
Active implantable medical devices - Part 2-3 : particular requirements
for cochlear and auditory brainstem implant systems
AFNOR
NF ETS 300826
En Vigor
1999-10-01
Electromagnetic compatibility and Radio spectrum Matters (ERM).
ElectroMagnetic Compatibility (EMC) standard for wideband transmission
systems and HIgh PERrformance Radio Local Area Network (HIPERLAN) equipment.
AFNOR
NF EN 13100-3
En Vigor
2005-04-01
Non destructive testing of welded joints in thermoplastics semi-finished
products - Part 3: Ultrasonic testing
AFNOR
NF EN 2959
En Vigor
2019-06-05
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) -
Solution treated and cold worked - Bar for forged fasteners - 3 mm - or
= at D - or = at 30 mm
AFNOR
NF EN 62053-11
En Vigor
2003-06-01
Electricity metering equipment (a.c.) - Particular requirements - Part
11 : electromechanical meters for active energy (classes 0,5, 1 and 2)
AFNOR
NF M07-094
En Vigor
1998-09-01
Liquid petroleum products. Determination of benzene, toluene and
methyltert-butylether in petrol. Method by capillary gas chromatography.
AFNOR
NF EN 62282-3-200
Anulada
2019-02-23
Fuel cell technologies - Part 3-200 : stationary fuel cell power systems
-Performance test methods
