Filtrar:
AFNOR
NF EN 3341
En Vigor
2005-10-01
Aerospace series - Aluminium alloy AL-P6061- - T4 or T42 - Sheet and
strip - 0,4 mm < or = a < or = 6 mm
AFNOR
XP CEN/TS 14383-4
En Vigor
2006-07-01
Prevention of crime - Urban planning and design - Part 4 : shops and offices
AFNOR
NF EN 2591-6402
En Vigor
2002-11-01
Aerospace series - Elements of electrical and optical connection - Test
methods - Part 6402 : optical elements - Shock
AFNOR
NF EN 300453
En Vigor
2008-11-01
Access and terminal (AT) - Ordinary and Special quality voice bandwith
4-wire analogue leased lines (A4O and a4S) - Terminal equipment interface
AFNOR
NF EN 12094-5
Anulada
2006-06-20
Fixed firefighting systems - Components for gas extinguishing systems -
Part 5 : requirements and test methods for high and low pressure
selector valves and their actuators for CO2 systems
AFNOR
NF EN 3120
En Vigor
2012-08-01
Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress
relieved - Seamless tube for pressure systems - 4 mm < or = D < or
= 51 mm - 690 MPa < or = Rm < or = 1 030 MPa
AFNOR
NF EN 2810
En Vigor
2001-11-01
Aerospace series - Nuts, hexagon, slotted / castellated, reduced height,
normal across flats, in heat resisting steel, passivated -
Classification : 900 MPa (at ambient temperature) / 650° C
AFNOR
NF EN 60998-2-2
Anulada
2004-08-05
Connecting devices for low voltage circuits for household and similar
purposes. Part 2-2 : particular requirements for connecting devices as
separate entities with screwless-type clamping units.
AFNOR
NF EN 2798
En Vigor
2019-05-29
Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set -
Hardness 80 IRHD
AFNOR
NF EN 4130
En Vigor
2009-10-01
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal
shank, medium length thread, in titanium alloy, aluminium IVD coated -
Classification : 1 100 MPa (at ambient temperature)/425 °C
AFNOR
AFNOR
NF EN 60061-3/A23
En Vigor
2001-05-01
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3 : gauges
AFNOR
NF EN 12618-3
En Vigor
2005-04-01
Products and systems for the protection and repair of concrete
structures - Test methods - Part 3 : determination of the adhesion of
injection products, with or without thermal cycling - Slant shear method
AFNOR
NF EN 2954-001
En Vigor
2010-09-01
Aerospace series - Macrostructure of titanium and titanium alloy wrought
products - Part 001 : general requirements
AFNOR
NF EN ISO 22254
En Vigor
2006-03-23
Dentistry — Manual toothbrushes — Resistance of tufted portion to deflection
AFNOR
NF U02-052-1
En Vigor
2024-10-09
High-clearance tractors - Stability on slopes and protection in event of
overturning - Part 1 : Verification methods
AFNOR
NF EN 602
Anulada
2004-07-05
Aluminium and aluminium alloys. Wrought products. Chemical composition
of semi-products used for the fabrication or articles for use in contact
with food.
AFNOR
NF EN 61937-4
En Vigor
2005-01-01
Digital audio - Interface for non-linear PCM encoded audio bitstreams
appplying IEC 60958 - Part 4 : non-linear PCM bitstreams according to
the MPEG audio format
AFNOR
NF ISO 1185
En Vigor
2004-10-01
Road vehicles — Connectors for the electrical connection of towing and
towed vehicles — 7-pole connector type 24 N (normal) for vehicles with
24 V nominal supply voltage
AFNOR
NF EN 3034
En Vigor
2009-08-01
Aerospace series - Nuts, self-locking, hexagonal with captive washer -
In heat resisting steel FE-PA92HT (A286), silver coated Classification:
1100 MPa/425 °C
AFNOR
NF EN 3890
En Vigor
2002-04-01
Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding
AFNOR
AFNOR
NF EN 10325
En Vigor
2006-11-01
Steel - Determination of yield strength increase by the effect of heat
treatment (Bake-Hardening-Index)
AFNOR
NF EN 13920-8
En Vigor
2003-09-01
Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of
non-ferrous materials from shredding processes destined to aluminium
separation processes
AFNOR
NF EN 62156
En Vigor
2002-04-01
Digital video recording with video compression 12,65 mm - Type D-9
component format 525/60 and 625/50 (digital S)
AFNOR
AFNOR
NF EN 54-18
En Vigor
2006-03-01
Fire detection and fire alarm systems - Part 18 : input/output devices
AFNOR
AFNOR
NF EN 60512-10-4
En Vigor
2004-02-01
Connectors for electronic equipment - Tests and measurements - Part 10-4
: impact tests (free components), static load tests (fixed components),
endurance tests and overload tests - Test 10d : electrical overload (connectors)
AFNOR
NF EN 4126
En Vigor
2010-08-01
Aerospace series - Nuts, anchor, self-locking, floating, two lug,
reduced series, with incremental counterbore, in heat resisting steel,
MoS2 lubricated - Classification : 900 MPa (at ambient temperature)/315 °C
AFNOR
NF EN 14719
En Vigor
2005-12-01
Pulp, paper and board - Determination of the Diisopropylnaphtalene
(DIPN) content by solvent extraction
AFNOR
NF EN 60749-16
En Vigor
2003-07-01
Semiconductor devices - Mechanical and climatic test methods - Part 16 :
particle impact noise dectection (PIND)
AFNOR
NF EN 14328
En Vigor
2005-08-01
Protective clothing - Gloves and armguards protecting against cuts by
powered knives - Requirements and test methods
AFNOR
AFNOR
NF ISO 18116
En Vigor
2006-08-01
Surface chemical analysis -- Guidelines for preparation and mounting of
specimens for analysis
AFNOR
NF EN 2047
En Vigor
2001-11-01
Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions
AFNOR
NF EN ISO 11073-30200
En Vigor
2006-03-01
Health informatics — Point-of-care medical device communication — Part
30200: Transport profile — Cable connected
AFNOR
NF EN ISO 19739
En Vigor
2006-04-01
Natural gas -- Determination of sulfur compounds using gas chromatography
AFNOR
NF EN 2137
En Vigor
2017-12-13
Aerospace series - Steel FE-PL75 - 1 100 MPa less than or equal to Rm
less than or equal to 1 250 MPa - Bars - De less than or equal to 100 mm
AFNOR
NF EN 1611-1/A1
En Vigor
2003-03-01
Sawn timber - Appearance grading of softwoods - Part 1 : european
spruces, firs, pines, Douglas fir and larches
