Filtrar:
AFNOR
NF EN ISO 14122-1
En Vigor
2017-03-01
Safety of machinery - Permanent means of access to machinery - Part 1 :
choice of fixed means and general requirements of access
AFNOR
NF EN ISO 14122-4
En Vigor
2017-03-01
Safety of machinery - Permanent means of access to machinery - Part 4 :
fixed ladders
AFNOR
NF EN 50436-3
En Vigor
2017-03-01
Alcohol interlocks - Test methods and performance requirements - Part 3
: guidance for authorities, decision makers, purchasers and users
AFNOR
XP ISO/TS 19700
En Vigor
2017-03-01
Controlled equivalence ratio method for the determination of hazardous
components of fire effluents - Steady-state tube furnace
AFNOR
NF EN ISO 14122-3
En Vigor
2017-03-01
Safety of machinery - Permanent means of access to machinery - Part 3 :
stairs, stepladders and guard-rails
AFNOR
NF E25-015
En Vigor
2017-03-01
Fasteners - Bolting assemblies, bolts, screws and studs with ISO metric
thread - Single shear test
AFNOR
NF EN 60603-7-82
En Vigor
2017-03-01
Connectors for electronic equipment - Part 7-82 : detail specification
for 8-way, 12 contacts, shielded, free and fixed connectors, for data
transmission with frequencies up to 2 000 MHz
AFNOR
NF E25-535
En Vigor
2017-03-01
Fasteners - Serrated washers internal teeth - Flat shape - Symbol DJC
AFNOR
NF EN ISO 9934-1
En Vigor
2017-03-01
Non-destructive testing - Magnetic particle testing - Part 1 : general principles
AFNOR
NF EN 61853-2
En Vigor
2017-03-01
Photovoltaic (PV) module performance testing and energy rating - Part 2
: spectral responsivity, incidence angle and module operating
temperature measurements
AFNOR
NF E25-534
En Vigor
2017-03-01
Fasteners - Serrated washers with external teeth - Flat shape - Symbol DEC
AFNOR
NF EN 15058
En Vigor
2017-03-01
Stationary source emissions - Determination of the mass concentration of
carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
AFNOR
NF EN 6031
En Vigor
2017-02-25
Aerospace series - Fibre reinforced plastics - Test method -
Determination of in-plane shear properties (± 45o tensile test)
AFNOR
NF EN 62689-1
En Vigor
2017-02-25
Current and Voltage sensors or detectors, to be used for fault passage
indication purposes - Part 1 : system aspects
AFNOR
AFNOR
NF EN 60674-2
Anulada
2024-05-22
Specification for plastic films for electrical purposes. . Part 2 :
methods of test.
AFNOR
NF EN 50341-2-6
En Vigor
2017-02-24
Overhead electrical lines exceeding AC 1 kV - Part 2-6 : national
Normative Aspects (NNA) for Spain (based on EN 50341-1:2012)
AFNOR
NF EN 50341-2-5
En Vigor
2017-02-24
Overhead electrical lines exceeding AC 1 kV - Part 2-5 : national
Normative Aspects (NNA) for Denmark (based on EN 50341-1:2012)
AFNOR
NF EN 14791
En Vigor
2017-02-18
Stationary source emissions - Determination of mass concentration of
sulphur oxides - Standard reference method
AFNOR
NF EN 14793
En Vigor
2017-02-18
Stationary source emissions - Demonstration of equivalence of an
alternative method with a reference method
AFNOR
AFNOR
NF EN 50527-1
En Vigor
2017-02-18
Procedure for the assessment of the exposure to electromagnetic fields
of workers bearing active implantable medical devices - Part 1 : general
AFNOR
NF EN 50527-2-1
En Vigor
2017-02-18
Procedure for the assessment of the exposure to electromagnetic fields
of workers bearing active implantable medical devices - Part 2-1 :
specific assessment for workers with cardiac pacemakers
AFNOR
NF EN 60154-2
En Vigor
2017-02-18
Flanges for waveguides - Part 2 : relevant specifications for flanges
for ordinary rectangular waveguides
AFNOR
NF EN 50290-2-25
En Vigor
2017-02-18
Communication cables - Part 2-25: common design rules and construction -
Polypropylene insulation compounds
AFNOR
NF EN 50289-3-8
En Vigor
2017-02-18
Communication cables - Specifications for test methods - Part 3-8 :
mechanical test methods - Abrasion resistance of cable sheath markings
AFNOR
NF EN 61169-58
En Vigor
2017-02-18
Radio-frequency connectors - Part 58 : sectional specification for RF
coaxial connectors with blind-mate coupling - Characteristic impedance
50 omega (type SBMA)
AFNOR
NF EN 60393-1
En Vigor
2017-02-18
Potentiometers for use in electronic equipment - Part 1 : generic specification
AFNOR
NF EN 60794-2-41
En Vigor
2017-02-18
Optical fibre cables - Part 2-41 : indoor cables - Product specification
for simplex and duplex buffered A4 fibres
AFNOR
AFNOR
FD E29-769
En Vigor
2017-02-15
Transportable gas cylinders - Valve outlet connections - Allocations and
dimensions for gases and gas mixtures for medical use
AFNOR
NF EN 61300-3-25
En Vigor
2017-02-11
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-25 : examinations and measurements -
Concentricity of non-angled ferrules and non-angled ferrules with fibre installed
AFNOR
NF EN 50290-2-23
En Vigor
2017-02-11
Communication cables - Part 2-23 : common design rules and construction
- Polyethylene insulation for multi-pair cables used in access
telecommunication networks : outdoor cables
AFNOR
NF ISO 13061-13
En Vigor
2017-02-11
Physical and mechanical properties of wood - Test methods for small
clear wood specimens - Part 13 : determination of radial and tangential shrinkage
AFNOR
NF EN 50288-6-2
En Vigor
2017-02-11
Multi-element metallic cables used in analogue and digital communication
and control - Part 6-2 : sectional specification for unscreened cables
characterised up to 250 MHz - Work area and patch cord cables
AFNOR
NF ISO 16312-1
En Vigor
2017-02-11
Guidance for assessing the validity of physical fire models for
obtaining fire effluent toxicity data for fire hazard and risk
assessment - Part 1 : criteria
AFNOR
NF EN 50288-5-1
En Vigor
2017-02-11
Multi-element metallic cables used in analogue and digital communication
and control - Part 5-1 : sectional specification for screened cables
characterized up to 250 MHz - Horizontal and building backbone cables
AFNOR
NF ISO 13061-14
En Vigor
2017-02-11
Physical and mechanical properties of wood - Test methods for small
clear wood specimens - Part 14 : determination of volumetric shrinkage
AFNOR
NF EN 50288-5-2
En Vigor
2017-02-11
Multi-element metallic cables used in analogue and digital communication
and control - Part 5-2: sectional specification for screened cables
characterized up to 250 MHz - Work area and patch cord cables
AFNOR
NF EN 50288-6-1
En Vigor
2017-02-11
Multi-element metallic cables used in analogue and digital communication
and control - Part 6-1 : sectional specification for unscreened cables
characterised up to 250 MHz - Horizontal and building backbone cables
