Filtrar:
AFNOR
NF ISO 12678-1
En Vigor
1997-09-01
Refractory products. Measurement of dimensions and external defects of
refractory bricks. Part 1 : dimensions and conformity to drawings.
AFNOR
NF EN ISO 5828
En Vigor
2001-05-01
Resistance welding equipment — Secondary connecting cables with
terminals connected to water-cooled lugs — Dimensions and characteristics
AFNOR
NF ETS 300046-2
En Vigor
1998-06-01
Integrated Services Digital Network (ISDN). Primary rate access. Safety
and protection. Part 2 : interface Ia. Safety.
AFNOR
NF EN ISO 7346-1
En Vigor
1998-03-01
Water quality - Determination of the acute lethal toxicity of substances
to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei,
Cyprinidae)) - Part 1: Static method (ISO 7346-1:1996)
AFNOR
NF EN ISO 13936-2
En Vigor
2004-09-01
Textiles - Determination of the slippage resistance of yarns at a seam
in woven fabrics - Part 2 : fixed load method
AFNOR
AFNOR
NF ISO 5782-2
En Vigor
1998-10-01
Pneumatic fluid power. Compressed air filters. Part 2 : test methods to
determine the main characteristics to be included in supplier's literature.
AFNOR
NF EN 13010
En Vigor
2003-07-01
Packaging - Unit packaging - Dimensions and requirements for pegboard display
AFNOR
AFNOR
NF EN 13076
En Vigor
2003-10-01
Devices to prevent pollution by backflow of potable water - Unrestricted
air gap-Family A - Type A
AFNOR
NF ETS 300840
En Vigor
2000-11-01
Telecommunications Security - Integrated Services Digital Network (ISDN)
- Confidentiality system for audiovisual services
AFNOR
NF EN ISO 11690-3
En Vigor
1999-06-01
Acoustics. Recommended practice for the design of low-noise workplaces
containing machinery. Part 3 : sound propagation and noise prediction in workrooms.
AFNOR
NF T70-337
En Vigor
1997-12-01
Energetic materials for defense. Physico-chemical analysis and
properties. Determination of secondary explosive constituents by room
temperature extraction.
AFNOR
NF EN ISO 14923
En Vigor
2003-10-27
Thermal spraying - Characterization and testing of thermally sprayed coatings
AFNOR
AFNOR
NF EN 12947
En Vigor
2000-08-01
Liming materials - Determination of magnesium content - Atomic
absorption spectrometric method
AFNOR
NF EN 301129
En Vigor
2002-04-01
Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS)
- Synchronous Digital Hierarchy (SDH) - System performance monitoring
parameters of SDH DRRS
AFNOR
NF EN 60061-3/A20
En Vigor
1999-10-01
Lamps caps and holders together with gauges for the control of
interchangeability and safety - Part 3 : gauges
AFNOR
NF ISO 5007
En Vigor
2003-07-01
Agricultural wheeled tractors - Operator's seat - Laboratory measurement
of transmitted vibration
AFNOR
GA S98-130
En Vigor
2002-05-01
Sterilisation of medical devices - Interpretation guide for NF EN 554
intended for health establishments - Validation and routine inspection
for steam sterilisation (October 1994)
AFNOR
NF EN 12676-1
En Vigor
2000-05-01
Road equipment - Anti-glare systems for roads - Part 1 : performances
and characteristics
AFNOR
NF EN ISO 15481
En Vigor
1999-10-01
Cross recessed pan head drilling screws with tapping screw thread
AFNOR
NF EN ISO 6865
En Vigor
2002-03-01
Animal feeding stuffs — Determination of crude fibre content — Method
with intermediate filtration
AFNOR
NF EN ISO 14402
En Vigor
1999-12-01
Water quality — Determination of phenol index by flow analysis (FIA and CFA)
AFNOR
NF EN 13742-2
En Vigor
2005-05-01
Irrigation techniques - Solid set sprinkler systems - Part 2 : Test methods
AFNOR
NF EN 62005-4
En Vigor
2000-09-01
Reliability of fibre optic interconnecting devices and passive optical
components - Part 4 : product screening
AFNOR
NF ISO 3341
Anulada
2002-08-05
Textile glass. Yarns. Determination of breaking force and breaking elongation.
AFNOR
NF ISO 13374-1
En Vigor
2003-07-01
Condition monitoring and diagnostics of machines -- Data processing,
communication and presentation -- Part 1: General guidelines
AFNOR
NF EN 13793
En Vigor
2004-02-01
Thermal insulating products for building applications - Determination of
behaviour under cyclic loading
AFNOR
NF EN 13920-11
En Vigor
2003-09-01
Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of
aluminium-copper radiators
AFNOR
NF P99-351
En Vigor
1998-02-01
Road and motorway toll. Toll passage attestations and receipts. Content
and physical characteristics.
AFNOR
NF ISO 4149
En Vigor
2005-09-01
Green coffee — Olfactory and visual examination and determination of
foreign matter and defects
AFNOR
NF EN 60169-21
En Vigor
1998-01-01
Radio-frequency connectors. Part 21 : two types of radio-frequency
connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with
different versions of screw coupling. Characteristic impedance 50 ohms
(types SC-A and SC-B).
AFNOR
NF ISO 6293-1
En Vigor
2000-08-31
Petroleum products — Determination of saponification number — Part 1:
Colour-indicator titration method
AFNOR
NF Q34-021
En Vigor
2000-06-01
Sanitary and domestic articles - Infantile hygiene articles : all-in-one
nappies and similar disposable products - Press fasteners :
determination of the longitudinal tensile strength
AFNOR
NF EN 61249-2-4
En Vigor
2002-07-01
Materials for printed boards and other interconnecting structures - Part
2-4 : reinforced base materials clad and unclad - Polyester
non-woven/woven fibreglass laminated sheet of defined flammability
(vertical burning test), copper-clad
AFNOR
NF P85-553
En Vigor
1998-12-01
Jointing products. Glazing materials and compounds for sealing. Sealants
in preformed strips. Assessment of rheological stability.
AFNOR
NF EN 61076-4-104
En Vigor
1999-08-01
Connectors for use in d.c. low-frequency analogue and digital high speed
data applications. Part 4-104 : printed board connectors with assessed
quality. Detail specification for two-part modular connectors, basic
grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm.
AFNOR
NF EN 13720
En Vigor
2002-11-01
Transportable gas cylinders - Filling conditions for acetylene battery vehicles
AFNOR
NF EN 13211
En Vigor
2001-07-01
Air quality - Stationary source emissions - Manual method of
determination of the concentration of total mercury
AFNOR
NF EN 13009
En Vigor
2000-06-01
Hygrothermal performance of building materials and products -
Determination of hygric expansion coefficient
AFNOR
NF EN ISO 13565-1
En Vigor
1998-03-01
Geometrical Product Specifications (GPS) — Surface texture: Profile
method; Surfaces having stratified functional properties — Part 1:
Filtering and general measurement conditions
AFNOR
NF EN 13307-1
En Vigor
2007-02-01
Timber blanks and semi-finished profiles for non-structural uses - Part
1 : requirements
AFNOR
NF EN 13191-1
En Vigor
2000-11-01
Non-fatty food - Determination of bromide residues - Part 1 :
determination of total bromide as inorganic bromide
AFNOR
NF EN 12232
En Vigor
2003-08-01
Surfaces for sports areas - Determination of thatch depth of natural turf
AFNOR
NF EN 14967
En Vigor
2006-11-01
Flexible sheets for waterproofing - Bitumen damp proof courses -
Definitions and characteristics
AFNOR
NF EN ISO 15979
En Vigor
2003-01-01
Open end blind rivets with break pull mandrel and protruding head - St/St
AFNOR
NF EN 3507
En Vigor
2007-09-01
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened
and tempered - Forgings - De inferior or equal to 100 mm - 930 MPa
inferior or equal to Rm inferior or equal to 1 080 MPa
AFNOR
NF EN 14107
En Vigor
2003-07-01
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) -
Determination of phosphorus content by inductively coupled plasma (ICP)
emission spectrometry
AFNOR
FD CEN/TR 1295-3
En Vigor
2008-03-01
Structural design of buried pipelines under various conditions of
loading - Part 3 : common method
AFNOR
NF EN 13130-1
En Vigor
2004-08-01
Materials and articles in contact with foodstuffs - Plastics substances
subject to limitation - Part 1 : guide to test methods for the specific
migration of substances from plastics to foods and food simulants and
the determination of substances in plastics and the selection of
conditions of exposure to food simulants
AFNOR
AFNOR
NF EN ISO 15609-3
En Vigor
2004-11-01
Specification and qualification of welding procedures for metallic
materials — Welding procedures specification — Part 3: Electron beam welding
AFNOR
NF EN 3893
En Vigor
2002-02-01
Aerospace series - Titanium alloy TI-W19001- Filler metal for welding
AFNOR
NF P99-100
Anulada
2003-09-05
Road traffic control. Traffic signal controller. Functional and
operational safety specifications
AFNOR
NF EN 60061-3/A29
En Vigor
2003-04-01
Lamps caps and holders together with gauges for the control of
interchangeability and safety - Part 3 : gauges
AFNOR
NF EN 4136
En Vigor
2010-01-01
Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance
normal shank, long thread, in alloy steel, cadmium plated -
Classification : 1 100 MPa (at ambient temperature)/235 °C
AFNOR
AFNOR
NF EN 3301
En Vigor
2008-06-01
Aerospace series - Bolts, T-head, close tolerance medium thread length
in heat resisting steel FE-PM1708 (FV535), uncoated - Classification : 1
000 MPa/550 °C
AFNOR
NF EN 2591-218
En Vigor
2002-12-01
Aerospace series - Elements of electrical and optical connection - Test
methods - Part 218: Ageing of terminal lugs and in-line splices by
temperature and current cycling
