Filtrar:
AFNOR
AFNOR
NF EN 12875-5
En Vigor
2006-05-01
Mechanical dishwashing resistance of utensils - Part 5 : rapid test for
ceramic catering articles
AFNOR
NF EN 12390-16
En Vigor
2019-10-02
Testing hardened concrete - Part 16: Determination of the shrinkage of concrete
AFNOR
NF EN ISO 7345
En Vigor
2018-04-04
Thermal performance of buildings and building components — Physical
quantities and definitions
AFNOR
NF EN 4611-006
En Vigor
2018-10-10
Aerospace series - Cables, electrical, for general purpose, single and
multicore assembly - XLETFE Family - Part 006 : silver plated copper
Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall
for open applications - UV laser printable - Product standard
AFNOR
NF EN 4853
En Vigor
2022-03-23
Aerospace series - Externally threaded fastener, 100° countersunk normal
head, Spiral Drive Recess - Classification : 1 100 MPa (at ambient
temperature)/425 °C
AFNOR
NF EN ISO 10328
En Vigor
2016-10-13
Prosthetics — Structural testing of lower-limb prostheses — Requirements
and test methods
AFNOR
NF EN 50290-2-29
En Vigor
2016-12-09
Communication cables - Part 2-29 : common design rules and construction
- Crosslinked polyethylene insulation compounds : instrumentation,
control and field bus cables
AFNOR
NF EN 300392-7
Anulada
2010-01-16
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 7 :
security (V2.3.1)
AFNOR
AFNOR
UTE C61-421
En Vigor
2008-06-01
Circuit-breakers and similar equipment for household use with plug-in
connecting devices for connecting bars
AFNOR
NF EN 13022-2
En Vigor
2014-12-26
Glass in building - Structural sealant glazing - Part 2 : assembly rules
AFNOR
NF EN ISO 105-N03
En Vigor
1995-08-01
Textiles. Tests for colour fastness. Part N03 : colour fastness to
bleaching : sodium chlorite (mild).
AFNOR
NF EN 45553
En Vigor
2020-07-10
General method for assessing the ability of an energy-related product to
be remanufactured
AFNOR
NF EN 300019-2-1
En Vigor
2018-05-18
Environmental Engineering (EE) - Environmental conditions and
environmental tests for telecommunications equipment - Part 2-1 :
specification of environmental tests - Storage (V2.3.1)
AFNOR
NF G32-103
En Vigor
1994-12-01
Clothing. Tests for garments. Evaluation of the locking up of elastic belts.
AFNOR
NF EN 930/IN2
En Vigor
2009-12-01
Footwear, leather and imitation leather goods manufacturing machines -
Roughing, scouring, polishing and trimming machines - Safety requirements
AFNOR
NF U44-003
En Vigor
2015-08-01
Basic soil improvers containing substances of agronomical interest
derived from the biological treatment of waters
AFNOR
AFNOR
AFNOR
NF EN 1230-2
Anulada
2009-12-25
Paper and board intended for contact with foodstuffs - Sensory analysis
- Part 2 : off-flavour (taint)
AFNOR
NF EN ISO 11111-6/A2
En Vigor
2016-11-05
Textile machinery - Safety requirements - Part 6 : fabric manufacturing
machinery - Amendment 2
AFNOR
NF EN 12801
En Vigor
2000-07-01
Footwear - Test methods for insoles, lining and insocks - Perspiration resistance
AFNOR
NF EN IEC 62442-3
En Vigor
2022-03-25
Energy performance of lamp controlgear - Part 3 : controlgear for
tungsten halogen lamps and LED light sources - Method of measurement to
determine the efficiency of controlgear
AFNOR
NF EN 17106-4
En Vigor
2021-10-20
Road operation machinery - Safety - Part 4 : road service area
maintenance machines - Requirements for grass and brush cutting machines
AFNOR
AFNOR
NF ISO 5608
Anulada
2013-08-24
Turning and copying tool holders and cartridges for indexable inserts. Designation.
AFNOR
NF EN IEC 60076-22-4
En Vigor
2019-04-19
Power transformers - Part 22-4 : power transformer and reactor fittings
- Insulating liquid to water heat exchangers
AFNOR
NF EN 303-6
En Vigor
2019-08-06
Heating boilers - Part 6: Heating boilers with forced draught burners -
Specific requirements for the domestic hot water operation and energy
performance of water heaters and combination boilers with atomizing oil
burners of nominal heat input not exceedi
AFNOR
NF EN 1429
En Vigor
2013-08-24
Bitumen and bituminous binders - Determination of residue on sieving of
bituminous emulsions, and determination of storage stability by sieving
AFNOR
NF EN 16948
En Vigor
2017-07-05
Child protective products - Consumer fitted child resistant locking
devices for cupboards and drawers - Safety requirements and test methods
AFNOR
NF EN ISO 18273
En Vigor
2016-02-13
Welding consumables — Wire electrodes, wires and rods for welding of
aluminium and aluminium alloys — Classification
AFNOR
NF EN 50225
En Vigor
1998-04-01
Code of pratice for the safe use of fully enclosed oil-filled electrical
equipment which may be contamined with PCBs.
AFNOR
NF EN ISO 3691-1/A1
En Vigor
2020-05-26
Industrial trucks — Safety requirements and verification — Part 1:
Self-propelled industrial trucks, other than driverless trucks,
variable-reach trucks and burden-carrier trucks — Amendment 1
AFNOR
XP ISO/TS 26844
En Vigor
2007-02-01
Milk and milk products - Determination of antimicrobial residues - Tube
diffusion test
AFNOR
NF EN 50436-7
En Vigor
2024-07-26
Alcohol interlocks - Test methods and performance requirements - Part 7:
Installation document
AFNOR
NF ISO 4400
En Vigor
1995-06-01
Fluid power systems and components. Three-pin electrical plug connectors
with earth contact. Characteristics and requirements.
AFNOR
NF EN ISO 9308-3
En Vigor
1999-03-01
Water quality — Detection and enumeration of Escherichia coli and
coliform bacteria — Part 3: Miniaturized method (Most Probable Number)
for the detection and enumeration of E. coli in surface and waste water
AFNOR
NF EN 17299
En Vigor
2019-08-07
Animal feeding stuffs : methods of sampling and analysis - Screening and
determination of authorized coccidiostats at additive and 1 % and 3 %
cross-contamination levels, and of non-registered coccidiostats and of
one antibiotic at sub-additive levels, in compound feed with High
Performance Liquid Chromatography - Tandem Mass Spectrometry detection (LC-MS/MS)
AFNOR
NF EN 598/IN1
En Vigor
2009-08-01
Ductile iron pipes, fittings, accessories and their joints for sewerage
applications - Requirements and test methods
AFNOR
NF ISO 7207-1
En Vigor
2007-03-01
Implants for surgery — Components for partial and total knee joint
prostheses — Part 1: Classification, definitions and designation of dimensions
AFNOR
NF EN 12285-3
En Vigor
2019-04-03
Workshop fabricated steel tanks - Part 3 : horizontal cylindrical single
skin and double skin tanks for the underground storage of flammable and
nonflammable water polluting liquids for heating and cooling of buildings
AFNOR
NF EN 61987-24-2
En Vigor
2017-10-27
Industrial-process measurement and control - Data structures and
elements in process equipment catalogues - Part 24-2 : list of
properties (LOPs) of valve/actuator accessories for electronic data exchange
AFNOR
NF C61-314
En Vigor
2017-05-05
Plugs and socket-outlets for household and similar purposes - 6 A /250 V
and 16 A/250 V systems
AFNOR
NF EN 1093-9+A1
En Vigor
2008-09-01
Safety of machinery - Evaluation of the emission of airborne hazardous
substances - Part 9 : pollutant concentration parameter, room method
AFNOR
NF EN IEC 62677-2
En Vigor
2018-04-28
Heat shrinkable low and medium voltage moulded shapes - Part 2 : methods
of test
AFNOR
NF EN 15384-1
En Vigor
2017-04-15
Packaging - Test method to determine the porosity of the internal
coating of flexible aluminium tubes - Part 1: Sodium chloride test
AFNOR
NF EN 140402
En Vigor
2018-04-14
Blank detail specification : fixed low power wirewound surface mount
(SMD) resistors
AFNOR
CWA 16008-9
En Vigor
2009-08-01
J/eXtensions for Financial Services (J/XFS) for the Java Platform -
Release 2009 - Part 9 : depository Device Class Interface - Programmer's Reference
AFNOR
NF EN ISO 7236
En Vigor
2016-10-07
Ships and marine technology - Inland navigation vessels - Mounting
attachments for demountable signal masts for push-tows
AFNOR
NF ISO 26367-2
En Vigor
2017-11-11
Guidelines for assessing the adverse environmental impact of fire
effluents — Part 2: Methodology for compiling data on environmentally
significant emissions from fires
AFNOR
NF EN 4538-2
En Vigor
2014-12-26
Aerospace series - Bearings, spherical plain, in corrosion resisting
steel with self-lubricating liner elevated load under low oscillations -
Narrow series - Dimensions and loads - Partie 2 : inch series
AFNOR
FD ISO/TR 30406
En Vigor
2017-11-29
Human resource management - Sustainable employability management for organizations
AFNOR
NF EN ISO 8611-3
En Vigor
2012-11-01
Pallets for materials handling — Flat pallets — Part 3: Maximum working loads
AFNOR
NF EN ISO 3175-2
Anulada
2018-04-20
Textiles -- Professional care, drycleaning and wetcleaning of fabrics
and garments -- Part 2: Procedure for testing performance when cleaning
and finishing using tetrachloroethene
AFNOR
NF H00-082
En Vigor
2017-07-07
Packaging - Complete, filled transport packages - Controlled horizontal
impact test
AFNOR
CWA 14167-4
En Vigor
2004-05-01
Cryptographic module for CSP signing operations - Protection profile -
CMCSO PP
AFNOR
NF EN ISO 374-5
En Vigor
2017-04-13
Protective gloves against dangerous chemicals and micro-organisms - Part
5: Terminology and performance requirements for micro-organisms risks
(ISO 374-5:2016)
AFNOR
NF EN 6075
En Vigor
2017-11-04
Aerospace series - Static seal elements O-Ring ethylene-propylene,
moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series
AFNOR
NF EN ISO 11125-2
Anulada
2018-11-17
Preparation of steel substrates before application of paints and related
products. Test methods for metallic blast-cleaning abrasives. Part 2 :
determination of particle size distribution.










