Filtrar:
AFNOR
NF ISO 241
En Vigor
2000-09-01
Shanks for turning and planning tools - Shapes and dimensions of the section
AFNOR
NF ETS 300719-1
En Vigor
1999-09-01
Radio Equipment and Systems (RES). Private wide area paging service.
Part 1 : technical characteristics for private wide-area paging systems.
AFNOR
NF DTU 55.2 P1-2 COMPIL 1
En Vigor
2016-10-14
Building works - Applied stone wall cladding - Part 1-2 : general
criteria for selection of materials
AFNOR
AFNOR
AFNOR
NF EN ISO 182-4
En Vigor
2000-12-01
Plastics - Determination of the tendency of compounds and products based
on vinyl chloride homopolymers and copolymers to evolve hydrogen
chloride and any other acidic products at elevated temperatures - Part 4
: potentiometric method
AFNOR
NF EN 14316-1
En Vigor
2005-04-01
Thermal insulation products for buildings - In-situ thermal insulation
formed from expanded perlite (EP) products - Part 1: specification for
bonded and loose-fill products before installation
AFNOR
NF EN 1149-3
En Vigor
2004-09-01
Protective clothing - Electrostatic properties - Part 3 : test methods
for measurement of charge decay
AFNOR
NF M07-075
En Vigor
1997-06-01
Liquid petroleum products. Determination of the foaming tendency of
diesel fuels.
AFNOR
NF EN ISO 9377-2
En Vigor
2000-12-01
Water quality — Determination of hydrocarbon oil index — Part 2: Method
using solvent extraction and gas chromatography
AFNOR
NF EN 3960
En Vigor
2001-12-01
Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for
brazing - Powder or paste
AFNOR
NF EN 13880-2
En Vigor
2004-03-01
Hot applied joint sealants - Part 2 : test method for the determination
of cone penetration at 25° C
AFNOR
NF EN 12316-1
En Vigor
1999-12-01
Flexible sheets for waterproofing. Part 1 : bitumen sheets for roof
waterproofing - Determination of peel resistance of joints
AFNOR
NF EN 13314
En Vigor
2003-02-01
Tanks for transport of dangerous goods - Service equipment for tanks -
Fill hole cover
AFNOR
NF EN ISO 14915-1
En Vigor
2003-02-01
Software ergonomics for multimedia user interfaces — Part 1: Design
principles and framework
AFNOR
AFNOR
NF E66-520-5
En Vigor
1999-09-01
Working zones of cutting tools. Couple tool-material. Part 5 :
application to milling technology.
AFNOR
NF EN 13864
En Vigor
2004-09-01
Surfaces for sports areas - Determination of tensile strength of
synthetic yarns
AFNOR
NF EN 13286-40
En Vigor
2003-07-01
Unbound and hydraulically bound mixtures - Part 40 : test method for the
determination of the direct tensile strength of hydraulically bound mixtures
AFNOR
NF L22-436
Anulada
2000-10-05
Hexagonal nuts. Reduced height. Normal across flats. ISO LH thread. 4H5H
or 5H tolerance class according to diameter.
AFNOR
NF S94-167-4
En Vigor
1998-12-01
Implants for surgery. Artificial ligaments. Part 4 : chemical
characterization. Identification of textile materials (method A) and
determination of extractable heavy metal content (method B).
AFNOR
FD CR 12739
En Vigor
1999-03-01
Biotechnology. Laboratories for research, development and analysis.
Report on the selection of equipment needed for biotechnology
laboratories according to the degree of hazard.
AFNOR
AFNOR
NF F00-702
En Vigor
1998-10-01
Railway applications. Dynamic interaction between vehicles and tracks.
Force measurement method.
AFNOR
NF T60-139
Anulada
2005-03-05
Industrial oils and greases. Apparent viscosity of lubricating grease.
AFNOR
NF EN ISO 14528-2
En Vigor
2000-01-01
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) -
Part 2 : preparation of test specimens and determination of properties
AFNOR
AFNOR
NF H96-116
En Vigor
1998-12-01
Mobile waste containers. Test code for the measurement of airborne
acoustical noise emitted by mobile waste containers.
AFNOR
XP PR EN 2500-6
En Vigor
1997-02-01
Aerospace series. Instructions for the drafting and use of metallic
material standards. Part 6 : specific requirements for filler metals for brazing.
AFNOR
AFNOR
XP P98-520
En Vigor
1997-08-01
Road traffic signs. Decors for traffic signs. Performances, technical
characteristics and specifications.
AFNOR
NF EN 145/A1
En Vigor
2000-05-01
Respiratory protective devices - Self-contained closed-circuit breathing
apparatus compressed oxygen or compressed oxygen-nitrogen type -
Requirements, testing, marking
AFNOR
NF EN ISO 2578
En Vigor
1998-12-01
Plastics. Determination of time-temperature limits after prolonged
exposure to heat.
AFNOR
AFNOR
XP PR EN 2712-007
En Vigor
1996-10-01
Aerospace series. Cables, electrical, single and multicore for general
purpose. Operating temperatures between 55 degrees celsius and 150
degrees celsius. Part 007 : screened (spiral) and jacketed, uv laser
printable. Product standard.
AFNOR
NF EN ISO 15366-2
En Vigor
2016-07-22
Nuclear fuel technology - Chemical separation and purification of
uranium and plutonium in nitric acid solutions for isotopic and isotopic
dilution analysis by solvent extraction chromatography - Part 2 :
samples containing plutonium and uranium in the nanogram range and below
AFNOR
NF EN 300064-5
En Vigor
2001-04-01
Integrated Services Digital Network (ISDN) - Direct Dialling In (DDI)
supplementary service - Digital Subscriber Signalling System No one
(DSS1) protocol - Part 5 : Test Suite Structure and Test Purpose
(TSS&TP) specification for the network
AFNOR
XP PR EN 2500-2
En Vigor
1997-02-01
Aerospace series. Instructions for the drafting and use of metallic
material standards. Part 2 : specific requirements for aluminium,
aluminium alloys and magnesium alloys.
AFNOR
NF ETS 300577
En Vigor
1997-12-01
Digital cellular telecommunications system (Phase 2). Radio transmission
and reception (GSM 05.05).
AFNOR
NF S97-543
En Vigor
1998-11-01
Healthcare informatics. United Nations Standardized Message. Cost and
implementation of medical ressources (MEDRUC).
AFNOR
NF E66-520-1
En Vigor
1997-09-01
Working zones of cutting tools. Couple tool-material. Part 1 : general presentation.
AFNOR
NF EN 319422
En Vigor
2016-07-15
Electronic Signatures and Infrastructures (ESI) - Time-stamping protocol
and time-stamp token profiles (V1.1.1)
AFNOR
NF ETS 300608
En Vigor
1999-12-01
Digital cellular telecommunications system (Phase 2) - Specification of
the Subscriber Identity module - Mobile Equipment (SIM-ME) interface
(GSM 11.11 version 4.20.1)
AFNOR
NF EN 300097-6
En Vigor
2001-04-01
Integrated Services Digital Network (ISDN) - Connected Line
Identification Presentation (COLP) supplementary service - Digital
Subscriber Signalling System No one (DSS1) protocol - Part 6 : Abstract
Test Suite (ATS) and partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma specification for the network
AFNOR
AFNOR
NF ISO 15161
En Vigor
2002-01-12
Guidelines on the application of ISO 9001:2000 for the food and drink industry
AFNOR
NF ETS 300047-3
En Vigor
1998-06-01
Integrated Services Digital Network (ISDN). Basic access. Safety and
protection. Part 3 : interface Ia. Protection.
AFNOR
NF EN ISO 7536
En Vigor
1996-08-01
Petroleum products. Determination of oxidation stability of gasoline.
Induction period method.
AFNOR
NF R16-202
En Vigor
1997-11-01
Diesel engines. High-pressure fuel injection pipe end-connections with
60 degrees female cone.
AFNOR
NF EN 60923
Anulada
1997-11-20
Ballasts for discharge lamps (excluding tubular fluorescent lamps).
Performance requirements.
AFNOR
NF ISO 13441-1
En Vigor
1998-04-01
Air-assisted agricultural sprayers. Data sheets. Part 1 : typical layout.
AFNOR
NF EN ISO 4267-2
En Vigor
1996-03-31
Petroleum and liquid petroleum products — Calculation of oil quantities
— Part 2: Dynamic measurement
AFNOR
NF EN 45510-4-4
En Vigor
2002-11-01
Guide for procurement of power station equipement - Part 4-4 : boiler
auxiliaries - Fuel preparation equipment
AFNOR
NF EN 2653
En Vigor
1996-11-01
Aerospace series. Screws, 100 degrees countersunk normal head, slotted,
threaded to head, in corrosion resisting steel, passivated.
Classification : 600 MPa (at ambient temperature) / 425 degrees celsius.
AFNOR
NF EN ISO 12115
En Vigor
1997-08-01
Fibre-reinforced plastics. Thermosetting moulding compounds and
prepregs. Determination of flowability and shelf life.
AFNOR
AFNOR
AFNOR
XP PR EN 2500-5
En Vigor
1997-02-01
Aerospace series. Instructions for the drafting and use of metallic
material standards. Part 5 : specific requirements for steel.
AFNOR
NF EN 12051
En Vigor
1999-12-01
Building hardware - Door and window bolts - Requirements and test methods
AFNOR
FD T54-324
En Vigor
1998-06-01
Decorative laminated sheets. Guide to the use of high pressure
decorative laminated sheets, in specific chemical and hygienic
environments (hospitals, laboratories, specific business).
