Filtrar:
AFNOR
NF EN ISO 10439-1
En Vigor
2015-06-13
Petroleum, petrochemical and natural gas industries — Axial and
centrifugal compressors and expander-compressors — Part 1: General requirements
AFNOR
NF EN 2936
En Vigor
1996-06-01
Aerospace series. Bolts, T-head, relieved shank, long thread, in heat
resisting nickel base alloy ni-P101HT (waspaloy), silver plated.
Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.
AFNOR
NF EN 1666
En Vigor
1998-04-01
Prevailing torque type hexagon nuts with flange (with non-metallic
insert) with metric fine pitch thread.
AFNOR
NF EN ISO 21871
En Vigor
2006-07-01
Microbiology of food and animal feeding stuffs — Horizontal method for
the determination of low numbers of presumptive Bacillus cereus — Most
probable number technique and detection method
AFNOR
AFNOR
NF ISO 7530-1
En Vigor
2015-10-13
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1:
Determination of cobalt, chromium, copper, iron and manganese
AFNOR
NF ISO 10263-5
Anulada
2009-05-01
Earth-moving machinery. Operator enclosure environment. Part 5 :
windscreen defrosting system test method.
AFNOR
NF L22-590
Anulada
2000-09-05
Self-locking anchor nuts, 60 degrees angle, deep counterbore in
silver-plated E-Z6 nct 25 corrosion-resisting steel. ISO thread.
AFNOR
AFNOR
NF EN 12629-3+A1
En Vigor
2010-11-01
Machines for the manufacture of constructional products from concrete
and calcium-silicate - Safety - Part 3 : slide and turntable machines
AFNOR
NF EN 3299
En Vigor
2019-07-10
Aerospace series - Shaft-nuts and threaded rings, self-locking, right-
or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286),
silver plated - Technical specification
AFNOR
NF EN ISO 22118
En Vigor
2011-10-01
Microbiology of food and animal feeding stuffs - Polymerase chain
reaction (PCR) for the detection and quantification of food-borne
pathogens - Performance characteristics (ISO 22118:2011)
AFNOR
NF EN 60061-3/A50
En Vigor
2016-01-16
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3 : gauges
AFNOR
NF EN ISO 16120-1
En Vigor
2017-06-07
Non-alloy steel wire rod for conversion to wire — Part 1: General requirements
AFNOR
NF EN 61988-2-5
En Vigor
2012-11-01
Plasma Display Panels - Part 2-5 : Measuring methods - Acoustic noise
AFNOR
NF C64-132
En Vigor
1987-12-01
High-voltage switchgear and controlgear. Three-pole switches of rated
voltage 24 kv intended to operate multiple capacitors banks.
AFNOR
NF EN 969
Anulada
2011-04-02
Ductile iron pipes, fittings, accessories and their joints for gas
pipelines. Requirements and test methods.
AFNOR
NF EN 60684-3-409
En Vigor
1999-12-01
Flexible insulating sleeving - Part 3 : specifications for individual
types of sleeving - Sheet 409 : glass textile sleeving with polyurethane
(PUR)-based coating
AFNOR
NF V08-408
En Vigor
1997-10-01
Microbiology of food and animal feeding stuffs. Control of stability of
preserved and assimilated products. Routine method.
AFNOR
NF ISO 7513
En Vigor
1991-05-01
Instant tea in solid form. Determination of moisture content (loss in
mass at 103 degrees celsius).
AFNOR
NF L22-721
En Vigor
1966-08-01
Aircraft fasteners. Solid pins, threaded, with split pin hole (ISO
thread) (rech.).
AFNOR
NF EN 2856
En Vigor
2006-09-01
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner,
reduced series, with counterbore - Classification : 1100 MPa/235°C
AFNOR
NF EN 16090
En Vigor
2019-11-20
Copper and copper alloys - Estimation of average grain size by ultrasound
AFNOR
NF EN IEC 60793-1-31
En Vigor
2019-04-05
Optical fibres - Part 1-31 : measurement methods and test procedures -
Tensile strength
AFNOR
AFNOR
NF EN 3768
En Vigor
2014-07-18
Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced
series, with counterbore, in heat resisting steel, MoS2 lubricated -
Classification : 1 100 MPa (at ambient temperature)/315 °C
AFNOR
AFNOR
NF EN ISO 2503/A1
En Vigor
2015-06-06
Gaz welding equipment - Pressure regulators and pressure regulators with
flow-metering devices for gas cylinders used in welding, cutting and
allied processes up to 300 bar (30 MPa) - Amendment 1
AFNOR
NF EN IEC 61300-2-10
En Vigor
2021-04-16
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 2-10 : tests - Crush and load resistance
AFNOR
NF EN ISO 17653
En Vigor
2012-07-01
Resistance welding — Destructive tests on welds in metallic materials —
Torsion test of resistance spot welds
AFNOR
NF EN 61754-8
En Vigor
1998-01-01
Fibre optic connector interfaces. Part 8 : type CF08 connector family.
AFNOR
NF EN 60335-2-72
En Vigor
2012-08-24
Household and similar electrical appliances - Safety - Part 2-72 :
particular requirements for floor treatment machines with or without
traction drive, for commercial use
AFNOR
AFNOR
NF EN 3377
En Vigor
1996-06-01
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting
steel FE-PA92HT (A 286) - Classification: 1 100 MPa (at ambient temperature)/425°C
AFNOR
NF EN ISO 28706-5
En Vigor
2011-10-01
Vitreous and porcelain enamels -Determination of resistance to chemical
corrosion - Part 5 : determination of resistance to chemical corrosion
in closed systems
AFNOR
NF EN 62047-21
En Vigor
2014-12-26
Semiconductor devices - Micro-electromechanical devices - Part 21 : test
method for Poisson's ratio of thin film MEMS materials
AFNOR
AFNOR
NF EN 60601-2-29
En Vigor
2009-03-01
Medical electrical equipment - Part 2-29 : particular requirements for
basic safety and essential performance of radiotherapy simulators
AFNOR
NF EN 61146-4
En Vigor
1998-12-01
Video cameras (PAL/SECAM/NTSC). Methods of measurements. Part 4 :
automatic functions of video cameras and camera-recorders.
AFNOR
NF EN ISO 1927-7
En Vigor
2013-02-23
Monolithic (unshaped) refractory products — Part 7: Tests on pre-formed shapes
AFNOR
NF EN 62841-2-8
En Vigor
2016-12-30
Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery - Safety - Part 2-8 : particular requirements for
hand-held shears and nibblers
AFNOR
AFNOR
XP CEN/TS 16818
En Vigor
2019-02-06
Durability of wood and wood-based products - Moisture dynamics of wood
and wood-based products
AFNOR
NF EN 2910
En Vigor
1994-11-01
Aerospace series. Shank nuts, self-locking, in heat resisting steel
fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) /
650 degrees celsius.
AFNOR
NF EN IEC 60335-2-2/A11
En Vigor
2023-11-10
Household and similar electrical appliances - Safety - Part 2-2:
Particular requirements for vacuum cleaners and water-suction cleaning appliances
AFNOR
AFNOR
NF EN 81714-3
En Vigor
2001-11-01
Design of graphical symbols for use in the technical documentation of
products - Part 3 : classification of connect nodes, networks and their encoding
AFNOR
NF EN 88-2
En Vigor
2022-10-12
Safety and control devices for gas burners and gas burning appliances -
Part 2 : pressure regulators for inlet pressures above 50 kPa up to and
including 500 kPa
AFNOR
NF EN 50667/A1
En Vigor
2021-12-03
Information technology - Automated infrastructure management (AIM)
systems - Requirements, data exchange and applications
AFNOR
NF EN 60745-2-22
En Vigor
2011-08-01
Hand-held motor-operated electric tools - Safety - Part 2-22 :
particular requirements for cut-off machines
AFNOR
NF T90-413
En Vigor
1985-10-01
Testing water - Detection and enumeration of coliforms and
thermotolerant coliforms - General method by culture in liquid media (M.P.N.)
AFNOR
AFNOR
NF EN IEC 60664-1/A1
En Vigor
2025-06-20
Insulation coordination for equipment within low-voltage supply systems
- Part 1 : principles, requirements and tests
AFNOR
NF EN ISO 21920-3
En Vigor
2022-01-19
Geometrical product specifications (GPS) - Surface texture : profile -
Part 3 : specification operators
AFNOR
NF ISO 2351-1
En Vigor
2007-05-01
Assembly tools for screws and nuts — Machine-operated screwdriver bits —
Part 1: Screwdriver bits for slotted head screws
AFNOR
NF EN 61747-10-1
En Vigor
2014-05-23
Liquid crystal display devices - Part 10-1 : environmental, endurance
and mechanical test methods - Mechanical
AFNOR
NF EN IEC 62343-2-1/A1
En Vigor
2024-01-26
Dynamic modules - Part 2-1 : reliability qualification - Test template -
Amendement 1
AFNOR
NF EN 50402
Anulada
2020-04-11
Electrical apparatus for the detection and measurement of combustible or
toxic gases or vapours or of oxygen - Requirements on the functional
safety of fixed gas detection systems
AFNOR
NF EN ISO 4064-2
En Vigor
2025-02-26
Water meters for cold potable water and hot water - Part 2 : test methods
AFNOR
NF EN 61076-7
En Vigor
2001-09-01
Connectors for use in d.c., low-frequency analogue and digital high
speed data applications - Part 7 : cable outlet accessories with
assessed quality, including qualification and capability approval -
Sectional specification
