76532 Resultados disponibles

Filtrar:

(40291)
(36241)
(0)
(0)
AFNOR

NF EN 60898-2

En Vigor
2021-08-27
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2 : circuit-breakers for a.c. and d.c. operation
AFNOR

NF EN IEC 61784-3

En Vigor
2021-03-26
Industrial communication networks - Profiles - Part 3 : functional safety fieldbuses - General rules and profile definitions
AFNOR

XP CEN/TS 13130-17

En Vigor
2005-05-01
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17 : determination of carbonyl chloride in plastics
AFNOR

NF EN 10314

En Vigor
2016-07-22
Method for the derivation of minimum values of proof strength of steel at elevated temperatures
AFNOR

NF EN 13828

En Vigor
2025-02-26
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements
AFNOR

NF EN ISO 7539-6/A1

En Vigor
2024-05-08
Corrosion of metals and alloys - Stress corrosion testing - Part 6 : preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1
AFNOR

NF E02-314

Anulada
2014-12-19
Steel gauges. Metric taper plug gauges.
AFNOR

NF EN 60660

En Vigor
2000-10-01
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but non including 300 kV
AFNOR

NF EN 12198-1+A1

En Vigor
2008-10-31
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
AFNOR

NF EN 1779

En Vigor
1999-12-01
Non-destructive testing - Leak testing - Criteria for method and technique selection
AFNOR

NF EN 61347-2-3

En Vigor
2012-01-01
Lamp control gear - Part 2-3 : particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
AFNOR

NF ISO 20515

Anulada
2021-12-04
Rolling bearings - Radial bearings, retaining slots - Dimensions and tolerances
AFNOR

FD CEN/TR 10261

Anulada
2023-06-28
Iron and steel - European standards for the determination of chemical composition
AFNOR

NF EN ISO 898-3

En Vigor
2018-06-27
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3 : flat washers with specified property classes
AFNOR

NF EN IEC 62512/A11

En Vigor
2020-12-04
Electric clothes washer-dryers for household use - Methods for measuring the performance
AFNOR

NF EN 1092-3

En Vigor
2004-02-29
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
AFNOR

NF EN 60335-2-31/A1

Anulada
2007-04-20
AFNOR

NF EN ISO 21007-2

Anulada
2016-02-26
Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identification
AFNOR

NF EN IEC 60974-5

En Vigor
2019-04-26
Arc welding equipment - Part 5 : wire feeders
AFNOR

NF ISO 8178-7

Anulada
2015-09-28
Reciprocating internal combustion engines. Exhaust emission measurement. Part 7 : engine family determination.
AFNOR

NF EN ISO 15616-3

En Vigor
2003-07-01
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
AFNOR

NF ISO 6194-1

En Vigor
2011-08-01
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1 : nominal dimensions and tolerances
AFNOR

NF EN 60601-2-22

Anulada
1996-04-20
Medical electrical equipment. Part 2 : particular requirements for the safety of diagnostic and therapeutic laser equipment.
AFNOR

NF EN ISO 13947

En Vigor
2024-12-04
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
AFNOR

FD E51-767

Anulada
2014-03-05
Ventilation for buildings - Ductwork tightness measurements
AFNOR

NF EN 60519-10

En Vigor
2013-10-11
Safety in electroheating installations - Part 10 : particular requirements for electrical resistance trace heating systems for industrial and commercial applications
AFNOR

NF B40-386

En Vigor
1994-12-01
Unshaped refractory products. Determination of the extrusion resistance of the taphole clays.
AFNOR

NF EN 315

Anulada
2001-06-05
Plywood - Tolerances for dimension
AFNOR

NF EN 50065-4-2/A2

En Vigor
2005-11-01
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2 : Low voltage decoupling filters - Safety requirements
AFNOR

FD ISO/TR 17243-1

En Vigor
2019-05-08
Machine tool spindles - Evaluation of machine tool spindle vibrations by measurements on spindle housing - Part 1 : spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
AFNOR

NF EN 62321-4/A1

En Vigor
2017-11-17
Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
AFNOR

NF EN 61000-4-25

En Vigor
2002-07-01
Electromagnetic compatibility (EMC) - Part 4-25 : testing and measurement techniques - HEMP immunity test methods for equipment and systems
AFNOR

NF EN 12012-1

Anulada
2010-01-28
Plastics and rubber machines - Size reduction machines - Part 1 : safety requirements for blade granulators
AFNOR

NF EN 60966-2-5

Anulada
2015-06-06
Radio frequency and coaxial cable assemblies - Part 2-5 : detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors
AFNOR

NF EN 60068-2-58

En Vigor
2015-08-08
Environmental testing - Part 2-58 : tests - Test Td : test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
AFNOR

NF EN 60512-14-5

En Vigor
2006-08-01
Connectors for electronic equipment - Tests and measurements - Part 14-5 : sealing tests - Test 14e : immersion at low air pressure
AFNOR

NF EN 61249-3-4

En Vigor
2002-01-01
Materials for printed boards and other interconnecting structures - Part 3-4 : sectional specification set for unreinforced base materials, clad and unclad (intented for flexible printed boards) - Adhesive coated flexible polyimide film
AFNOR

NF EN 60641-1

En Vigor
2008-11-01
Pressboard and presspaper for electrical purposes - Part 1 : definitions and general requirements
AFNOR

NF C93-522/A2

En Vigor
1983-12-01
Components for electronic equipment. Electrical wires for wrapped connexions. General requirements.
AFNOR

NF EN IEC 60794-1-312

En Vigor
2024-03-15
Optical fibre cables - Part 1-312 : generic specification - Basic optical cable test procedures - Cable element test methods - Elongation test for buffer tubes at low temperature, Method G11B
AFNOR

NF EN IEC 62325-301

En Vigor
2018-05-04
Framework for energy market communications - Part 301 : common information model (CIM) extensions for markets
AFNOR

FD HD 361 S4

En Vigor
2024-02-28
System for cable designation
AFNOR

NF EN 61300-3-37

En Vigor
2005-10-01
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37 : examinations and measurements - Endface angle of angle-polished optical fibres
AFNOR

NF EN IEC 61788-7

En Vigor
2020-05-15
Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
AFNOR

NF EN 60034-29

En Vigor
2008-08-01
Rotating electrical machines - Part 29 : equivalent loading and superposition techniques - Indirect testing to determine temperature rise
AFNOR

NF EN 61975/A1

En Vigor
2017-04-15
High-voltage direct current (HVDC) installations - System tests
AFNOR

NF C33-255

En Vigor
2015-08-29
AFNOR

NF EN IEC 62053-22/A11

En Vigor
2021-07-23
Electricity metering equipment - Particular requirements - Part 22 : static meters for AC active energy (classes 0,1S, 0,2S and 0,5S)
AFNOR

NF EN 61400-25-3

En Vigor
2016-01-23
Wind turbines - Part 25-3 : communications for monitoring and control of wind power plants - Information exchange models
AFNOR

NF EN 61305-1

En Vigor
1995-11-01
Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Part 1 : general.
AFNOR

NF EN 62752/A1

En Vigor
2020-05-08
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
AFNOR

NF EN 13258

En Vigor
2003-07-01
Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
AFNOR

NF EN ISO 377

En Vigor
2017-07-12
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
AFNOR

NF EN 61643-351

En Vigor
2017-04-08
Components for low-voltage surge protective devices - Part 351 : performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
AFNOR

NF EN 203-2-10

En Vigor
2007-07-01
Gas heated catering equipment - Part 2-10 : specific requirements - Chargrills
AFNOR

NF C66-207

En Vigor
1975-09-01
Insulators and fittings for overhead lines. Glass insulators for voltages lower than 1000 V. Terminal insulators (AV).
AFNOR

NF EN 12720/IN1

En Vigor
2013-12-27
Furniture - Assessment of surface resistance to cold liquids
AFNOR

NF EN IEC 62031

En Vigor
2020-03-12
LED modules for general lighting - Safety specifications
AFNOR

NF EN 1593

En Vigor
1999-11-01
Non-destructive testing - Leak testing - Bubble emission techniques
AFNOR

NF EN 50193-2-1/A1

En Vigor
2020-08-21
Electric instantaneous water heaters - Part 2-1 : methods for measuring the performance - Multifunctional electric instantaneous water heaters