Filtrar:
AFNOR
NF EN 62226-2-1
En Vigor
2005-04-01
Exposure to electric or magnetic fields in the low and intermediate
frequency range - Methods for calculating the current density and
internal electric field induced in the human body - Part 2-1 : exposure
to magnetic fields - 2D models
AFNOR
NF EN IEC 60112
En Vigor
2020-12-04
Method for the determination of the proof and the comparative tracking
indices of solid insulating materials
AFNOR
NF EN IEC 60352-6
En Vigor
2023-01-20
Solderless connections - Part 6 : insulation piercing connections -
General requirements, test methods and practical guidance
AFNOR
AFNOR
AFNOR
NF EN 60603-6
En Vigor
1998-06-01
Connectors for frequencies below 3 MHz for use with printed boards. .
Part 6 : edge-docket connectors and printed-board connectors with 2,54
mm (0,1 in) contact spacing for single or double-sided printed boards of
1,6 mm (0,063 in) nominal thickness.
AFNOR
NF EN 50363-2-1/A1
En Vigor
2012-03-01
Insulating, sheathing and covering materials for low voltage energy
cables - Part 2-1 : cross-linked elastomeric sheathing compounds
AFNOR
AFNOR
NF EN 60684-3-343 A 345
En Vigor
2003-02-01
Flexible insulating sleeving - Part 3 : specifications for individual
types of sleeving - Sheets 343 to 345 : expandable braided ethylene
chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
AFNOR
AFNOR
NF EN IEC 61010-2-130
En Vigor
2021-05-28
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 2-130 : particular requirements for equipment
intended to be used in educational establishments by children
AFNOR
NF EN 61334-4-1
En Vigor
1997-03-01
Distribution automation using distribution line carrier systems. Part 4
: data communication protocols. Section 1 : reference model of the
communication system.
AFNOR
AFNOR
NF EN 50134-1
En Vigor
2002-12-01
Alarm systems - Social alarm systems - Part 1 : system requirements
AFNOR
NF EN 61207-6
Anulada
2018-02-24
Expression of performance of gas analysers. Part 6 : photometric analyzers.
AFNOR
NF EN ISO 6412-3
Anulada
2018-03-13
Technical drawings. Simplified representation of pipelines. Part 3 :
terminal features of ventilation and drainage systems.
AFNOR
NF EN IEC 61204-7
En Vigor
2018-03-16
Low-voltage switch mode power supplies - Part 7 : safety requirements
AFNOR
NF EN 10228-4
En Vigor
2016-12-09
Non-destructive testing of steel forgings - Part 4 : ultrasonic testing
of austenitic and austenitic-ferritic stainless steel forgings
AFNOR
AFNOR
NF EN 62852/A1
En Vigor
2020-05-15
Connectors for DC-application in photovoltaic systems - Safety
requirements and tests
AFNOR
NF ISO 4942
En Vigor
2025-06-18
Steels and irons - Determination of vanadium content - N-BPHA
spectrophotometric method
AFNOR
NF EN ISO 14120
En Vigor
2016-01-16
Safety of machinery — Guards — General requirements for the design and
construction of fixed and movable guards
AFNOR
AFNOR
NF EN 10244-3
En Vigor
2001-10-01
Steel wire and wire products - Non-ferrous metallic coatings on steel
wire - Part 3 : aluminium coatings
AFNOR
NF EN IEC 60669-2-1
En Vigor
2022-09-16
Switches for household and similar fixed electrical installations - Part
2-1 : Particular requirements - Electronic control devices
AFNOR
AFNOR
NF EN 12258-2
En Vigor
2005-03-01
Aluminium and aluminium alloys - Terms and definitions - Part 2 :
chemical analysis
AFNOR
NF ISO 13012-1
En Vigor
2019-06-08
Rolling bearings - Accessories for sleeve type linear ball bearings -
Part 1 : boundary dimensions, geometrical product specifications (GPS)
and tolerances for series 1 and 3
AFNOR
NF EN 14532-2
En Vigor
2005-03-01
Welding consumables - Test methods and quality requirements - Part 2 :
supplementary methods and conformity assessment of consumables for
steel, nickel and nickel alloys
AFNOR
NF ISO 24035
En Vigor
2014-07-18
Belt drives - V-belts and the corresponding pulleys for agricultural
machineries - Dimensions
AFNOR
NF EN ISO 15614-5
Anulada
2024-09-27
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 5: Arc welding of titanium,
zirconium and their alloys (ISO 15614-5:2004)
AFNOR
AFNOR
AFNOR
NF EN ISO 14571
En Vigor
2022-11-09
Metallic coatings on non-metallic basis materials - Measurement of
coating thickness - Micro-resistivity method
AFNOR
NF EN IEC 63013
En Vigor
2019-11-29
LED packages - Long-term luminous and radiant flux maintenance projection
AFNOR
NF EN 13755
Anulada
2008-08-09
Natural stone test methods - Determination of water absorption at
atmospheric pressure
AFNOR
NF EN ISO 15984
En Vigor
2003-01-01
Open end blind rivets with break pull mandrel and countersunk head - A2/A2
AFNOR
NF EN ISO 17172
En Vigor
2021-01-20
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of compaction properties of ceramic powders
AFNOR
AFNOR
NF EN 60335-2-79
En Vigor
2012-08-24
Household and similar electrical appliances - Safety - Part 2-79:
Particular requirements for high pressure cleaners and steam cleaners
AFNOR
NF ISO 24337
En Vigor
2020-05-01
Laminate floor coverings — Determination of geometrical characteristics
AFNOR
NF E29-190-2
Anulada
2014-11-15
Gas pressure regulators for distribution and service lines - Part 2 :
type B Regulators
AFNOR
NF EN ISO 4126-1
En Vigor
2013-09-07
Safety devices for protection against excessive pressure - Part 1 :
safety valves
AFNOR
NF EN 62075
En Vigor
2013-07-04
Audio/video, information and communication technology equipment -
Environmentally conscious design
AFNOR
NF EN IEC 62764-1
En Vigor
2022-10-21
Measurement procedures of magnetic field levels generated by electronic
and electrical equipment in the automotive environment with respect to
human exposure - Part 1 : low frequency magnetic fields
AFNOR
NF E29-676
Anulada
2015-03-04
Gas cylinders. Taper screw thread for valve stem and cylinder neck
assembly. Nominal diameter 28.3 mm, taper 3/25, 14 TPI, whitworth form.
AFNOR
NF EN ISO 11372
En Vigor
2012-02-01
Gas cylinders — Acetylene cylinders — Filling conditions and filling inspection
AFNOR
UTE C90-124
En Vigor
1991-07-01
Electronic and telecommunication equipment. Individual or community
antennas for broadcast reception. Requirements.
AFNOR
NF EN IEC 63203-801-2
En Vigor
2022-12-16
Wearable electronic devices and technologies - Part 801-2 : smart body
area network (SmartBAN) - Low complexity medium access control (MAC) for SmartBAN
AFNOR
NF EN 14394+A1
En Vigor
2008-10-01
Heating boilers - Heating boilers with forced draught burners - Nominal
heat output not exceeding 10 MW and maximum operating temperature of 110 °C
AFNOR
NF EN IEC 62002-1
En Vigor
2008-08-22
Mobile and portable DVB-T/H radio access - Part 1 : interface specification
AFNOR
NF EN 378-3+A1
En Vigor
2020-10-27
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 3: Installation site and personal protection
AFNOR
NF EN 60317-0-10
En Vigor
2017-08-04
Specifications for particular types of winding wires - Part 0-10 :
general requirements - Polyester Glass fibre wound fused, ror resin or
varnish impregnated, bare or enamelled round copper wire
AFNOR
NF EN IEC 60938-2
En Vigor
2021-08-27
Fixed inductors for electromagnetic interference suppression - Part 2 :
sectional specification on power line chokes
AFNOR
NF ISO 8178-1
Anulada
2017-08-08
Reciprocating internal combustion engines -- Exhaust emission
measurement -- Part 1: Test-bed measurement of gaseous and particulate
exhaust emissions
AFNOR
UTE C32-063-3
En Vigor
2009-01-01
Toxicity of combustion gases of halogen free materials for sheath used
in communication cables with particular fire related properties
AFNOR
NF EN IEC 60051-3
En Vigor
2021-04-30
Direct acting indicating analogue electrical measuring instruments and
their accessories - Part 3 : special requirements for wattmeters and varmeters
AFNOR
NF EN 60603-7-1
En Vigor
2012-12-01
Connectors for electronic equipment - Part 7-1 : detail specification
for 8-way, shielded, free and fixed connectors
AFNOR
NF EN 13941-2+A1
En Vigor
2021-12-15
District heating pipes - Design and installation of thermal insulated
bonded single and twin pipe systems for directly buried hot water - Part
2 : installation
AFNOR
NF EN ISO 5198
En Vigor
1999-04-01
Centrifugal, mixed flow and axial pumps. Code for hydraulic performance
tests. Precision grade.
