Filtrar:
AFNOR
XP E10-100-2
En Vigor
2018-10-03
Geometrical product specifications (GPS) - Dimensional measuring methods
- Part 2 : evaluation of the geometrical deviations
AFNOR
NF EN 834
Anulada
2013-09-07
Heat cost allocators for the determination of the consumption of room
heating radiators. Appliances with electrical energy supply.
AFNOR
NF EN IEC 61000-4-2
En Vigor
2025-04-25
Electromagnetic compatibility (EMC) - Part 4-2 : testing and measurement
techniques - Electrostatic discharge immunity test
AFNOR
NF EN 818-3+A1
En Vigor
2008-05-01
Short link chain for lifting purposes - Safety - Part 3 : medium
tolerance chain for chain slings - Grade 4
AFNOR
AFNOR
NF EN 746-3
Anulada
2010-01-28
Industrial thermoprocessing equipment - Part 3 : safety requirements for
the generation and use of atmosphere gases
AFNOR
NF EN IEC 60947-9-2
En Vigor
2025-07-11
Low-voltage switchgear and controlgear - Part 9-2 : active arc-fault
mitigation systems - Optical-based internal arc-detection and mitigation devices
AFNOR
NF ISO 7967-9
Anulada
2010-06-19
Reciprocating internal combustion engines. Vocabulary of components and
systems. Part 9 : control and monitoring systems.
AFNOR
NF C66-435
En Vigor
1974-02-01
Insulators and fittings for overhead lines. Terminal stirrups ES 90-120
and ED 115-200.
AFNOR
AFNOR
NF EN IEC 60335-2-43
En Vigor
2020-10-30
Household and similar electrical appliances - Safety - Part 2-43 :
Particular clothes dryers and towel rails
AFNOR
NF EN IEC 60335-2-120
En Vigor
2025-08-01
Household and similar electrical appliances - Safety - Part 2-120 :
particular requirements for the safety of appliances for the generation
of directly inhalable aerosols
AFNOR
NF ISO 12759-2
En Vigor
2021-11-13
Fans - Efficiency classification for fans - Part 2 : standard losses for
drive components
AFNOR
NF EN 16798-17
En Vigor
2017-08-12
Energy performance of buildings - Ventilation for buildings - Part 17 :
guidelines for inspection of ventilation and air conditioning systems
(Module M4-11, M5-11, M6-11, M7-11)
AFNOR
NF EN 50090-3-4
En Vigor
2018-06-30
Home and Building Electronic Systems (HBES) - Part 3-4 : secure
Application Layer, Secure Service, Secure configuration and security Resources
AFNOR
NF EN IEC 62714-1
En Vigor
2018-06-29
Engineering data exchange format for use in industrial automation
systems engineering - Automation markup language - Part 1 : architecture
and general requirements
AFNOR
NF EN 50566
Anulada
2020-09-05
Product standard to demonstrate compliance of radio frequency fields
from handheld and body-mounted wireless communication devices used by
the general public (30 MHz - 6 GHz)
AFNOR
NF EN ISO 14171
Anulada
2016-10-11
Welding consumables -- Solid wire electrodes, tubular cored electrodes
and electrode/flux combinations for submerged arc welding of non alloy
and fine grain steels -- Classification
AFNOR
FD D30-505-2
Anulada
1998-08-01
Appliances using combustible gases. Guidelines for testing of gas
appliances. Part 2 : specific applications.
AFNOR
NF EN 50571
En Vigor
2013-11-22
Household and similar electrical appliances - Safety - Particular
requirements for commercial electric washing machines
AFNOR
NF EN 16524
En Vigor
2020-11-04
Mechanical products - Methodology for reduction of environmental impacts
in product design and development
AFNOR
NF EN 60512-16-3
En Vigor
2008-12-01
Connectors for electronic equipment - Tests and measurements - Part 16-3
: mechanical tests on contacts and terminations - Test 16c :
contact-bending strength
AFNOR
NF EN 61987-16
En Vigor
2017-07-07
Industrial-process measurement and control - Data structures and
elements in process equipment catalogues - Part 16 : lists of properties
(LOPs) for density measuring equipment for electronic data exchange
AFNOR
NF A06-710
En Vigor
1987-09-01
Chemical analysis of copper and copper alloys. Determination of nickel
content. Molecular absorption spectrophotometric method.
AFNOR
FD ISO/TR 1281-2
En Vigor
2009-06-01
Rolling bearings - Explanatory notes on ISO 281 - Part 2 : modified
rating life calculation, based on a systems approach of fatigue stresses
AFNOR
NF EN IEC 62282-3-100
En Vigor
2020-04-10
Fuel cell technologies - Part 3-100 : stationary fuel cell power systems
- Safety
AFNOR
NF EN ISO 10644
Anulada
2009-09-05
Screw and washer assemblies with plain washers. Washer hardness classes
200 HV and 300 HV.
AFNOR
NF EN 60061-1/A57
En Vigor
2018-03-23
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1 : lamp caps
AFNOR
FD CEN/TR 17079
En Vigor
2019-03-13
Design of fastenings for use in concrete - Redundant non-structural systems
AFNOR
NF EN 12516-2+A1
En Vigor
2021-10-27
Industrial valves - Shell design strength - Part 2 : calculation method
for steel valve shells
AFNOR
NF EN 50180-2
En Vigor
2015-12-11
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid
filled transformers - Part 2 : requirements for bushings components
AFNOR
NF EN ISO 4126-1/A1
En Vigor
2016-09-30
Safety devices for protection against excessive pressure - Part 1 :
safety valves - Amendment 1
AFNOR
FD ISO/TR 22694
En Vigor
2009-02-01
Gas cylinders . Methods for establishing acceptance/rejection criteria
for flaws in seamless steel and aluminium alloy cylinders at time of
periodic inspection and testing
AFNOR
NF EN IEC 60335-2-28
En Vigor
2025-05-16
Household and similar electrical appliances - Safety - Part 2-28 :
particular requirements for sewing machines
AFNOR
NF EN 50174-1
Anulada
2013-09-14
Information technology - Cabling installation - Part 1 : specification
and quality assurance
AFNOR
AFNOR
NF EN 60332-1-2/A1
En Vigor
2015-12-25
Tests on electric and optical fibre cables under fire conditions - Part
1-2 : test for vertical flame propagation for a single insulated wire or
cable - Procedure for 1 KW pre-mixed flame
AFNOR
NF EN IEC 61987-92
En Vigor
2018-08-17
Industrial-Process Measurement and Control - Data Structures and
Elements in Process Equipment Catalogues - Part 92 : lists of properties
(LOP) of measuring equipment for electronic data exchange - Aspect LOPs
AFNOR
NF EN 62282-6-200
Anulada
2019-12-20
Fuel cell technologies - Part 6-200 : micro fuel cell power systems -
Performance test methods
AFNOR
NF ISO 15219
En Vigor
2016-01-16
Earth-moving machinery - Cable excavators - Terminology and commercial specifications
AFNOR
NF EN ISO 3457
Anulada
2004-04-05
Earth-moving machinery. Guards and shields. Definitions and specifications.
AFNOR
NF EN 60061-2/A36
En Vigor
2007-08-01
Lamp caps and holders together with gauges for the control of
intechangeablity and safety - Part 2 : lampholders
AFNOR
AFNOR
NF EN 61290-7-1
Anulada
2012-10-26
Optical fibre amplifiers. Basic specification. Part 7-1 : test methods
for out-of-band insertion losses. Filtered optical power meter.
AFNOR
AFNOR
NF EN 50377-8-8
En Vigor
2007-12-01
Connector sets and interconnect components to be used in optical fibre
communication systems - Product specifications - Part 8-8 : LSH-APC
simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode
fibre, with full zirconia ferrule category U
AFNOR
NF EN 13986+A1
En Vigor
2015-05-29
Wood-based panels for use in construction - Characteristics, evaluation
of conformity and marking
AFNOR
NF EN 60335-2-58
Anulada
2010-06-05
Safety of household and similar electrical appliances - Part 2-58 :
Particular requirements for commercial electric dishwashing machines
AFNOR
NF EN 50632-3-3
En Vigor
2017-04-15
Electric motor-operated tools - Dust measurement procedure - Part 3-3 :
particular requirements for transportable planers and thicknessers
AFNOR
NF EN 60738-1-1
En Vigor
2016-08-13
Thermistors - Directly heated positive step-function temperature
coefficient - Part 1-1 : blank detail specification - Current limiting
application - Assessment level EZ
AFNOR
NF ISO 965-1
Anulada
2013-11-09
ISO general purpose metric screw threads. Tolerances. Part 1 :
principles and basic data.
AFNOR
AFNOR
FD CEN ISO/TR 16060
En Vigor
2015-10-07
Destructive tests on welds in metallic materials - Etchants for
macroscopic and microscopic examination
AFNOR
NF EN ISO 14159
Anulada
2014-11-24
Safety of machinery — Hygiene requirements for the design of machinery
AFNOR
NF EN IEC 60721-2-4
En Vigor
2018-08-24
Classification of environmental conditions - Part 2-4 : environmental
conditions appearing in nature - Solar radiation and temperature
AFNOR
NF EN ISO 8765
Anulada
2022-08-18
Hexagon head bolts with metric fine pitch thread - Product grades A and B
AFNOR
NF EN ISO 10673
Anulada
2009-09-05
Plain washers for screw and washer assemblies - Small, normal and large
series - Product grade A
AFNOR
NF EN 818-4+A1
En Vigor
2008-05-01
Short link chain for lifting purposes - Safety - Part 4 : chain slings -
Grade 8
AFNOR
NF EN 1515-4
Anulada
2021-06-03
Flanges and their joints - Bolting - Part 4 : Selection of bolting for
equipment subject to the Pressure Equipment Directive 97/23/EC
AFNOR
NF EN ISO 11463
En Vigor
2020-09-09
Corrosion of metals and alloys - Guidelines for the evaluation of
pitting corrosion
