Filtrar:
AFNOR
NF EN 26184-2
En Vigor
1991-06-01
Explosion protection systems. Part 2 : determination of explosion
indices of combustible gases in air.
AFNOR
NF EN 16261-4
En Vigor
2012-11-01
Pyrotechnic articles - Fireworks, Category 4 - Part 4 : minimum
labelling requirements and instructions for use
AFNOR
NF ISO 6743-7
En Vigor
1987-04-01
Lubricants, industrial oils and related products (class L).
Classification. Part 7 : familly M (metalworking).
AFNOR
AFNOR
NF EN IEC 60335-2-26
En Vigor
2026-04-22
Household and similar electrical appliances - Safety - Part 2-26:
Particular requirements for clocks
AFNOR
NF ETS 300084
En Vigor
1995-07-01
Integrated Services Digital Network (ISDN). Circuit mode structured
bearer service category usable for 3,1 kHz audio information transfer.
Terminal requirements necessary for end-to-end compatibility.
AFNOR
NF EN IEC 61300-2-34
En Vigor
2024-07-05
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 2-34 : tests - Resistance to solvents
and contaminating fluids
AFNOR
NF ISO 2591-1
En Vigor
1989-09-01
Test sieving. Part 1 : methds using test sieves of woven wire cloth and
perforated metal plate.
AFNOR
AFNOR
NF EN ISO 14451-3
En Vigor
2013-05-17
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3:
Labelling (ISO 14451-3:2013)
AFNOR
NF EN 17149-3
En Vigor
2025-01-29
Railway applications - Strength assessment of rail vehicle structures -
Part 3 : fatigue strength assessment based on cumulative damage
AFNOR
NF EN ISO 12944-7
Anulada
2018-02-22
Paints and varnishes. Corrosion protection of steel structures by
protective paint systems. Part 7 : execution and supervision of paint work.
AFNOR
NF EN ISO 16484-6
En Vigor
2026-04-22
Building automation and control systems (BACS) — Part 6: Data
communication conformance testing
AFNOR
AFNOR
NF EN 848-2+A2
En Vigor
2012-11-01
Safety of woodworking machines - One side moulding machines with
rotating tool - Part 2 : single spindle hand fed/integrated fed routing machines
AFNOR
AFNOR
NF ETS 300095
En Vigor
1994-09-01
Integrated Services Digital Network (ISDN). Connected line
identification restriction (colr) supplementary service. Service description.
AFNOR
AFNOR
NF EN 15682-2
En Vigor
2013-10-18
Glass in building - Heat soaked thermally toughened alkaline earth
silicate safety glass - Part 2 : evaluation of conformity/Product standard
AFNOR
NF L31-212
En Vigor
1966-12-01
Airframe bearings. Rigid ball bearings for average loads. (rech.).
Dimensions and loads.
AFNOR
NF EN 62290-1
En Vigor
2014-11-29
Railway applications - Urban guided transport management and
command/control systems - Part 1 : system principles and fundamental concepts
AFNOR
NF EN IEC 61400-6/A1
En Vigor
2025-08-08
Wind energy generation systems - Part 6: Tower and foundation design requirements
AFNOR
NF EN 15534-5
En Vigor
2014-03-12
Composites made from cellulose-based materials and thermoplastics
(usually called wood-polymer composites (WPC) or natural fibre
composites (NFC)) - Part 5 : specifications for cladding profiles and tiles
AFNOR
NF EN 663
En Vigor
1995-03-01
Resilient floor coverings. Determination of conventional pattern depth.
AFNOR
NF ISO 2551
En Vigor
2021-11-24
Textile floor coverings and textile floor coverings in tile form —
Determination of dimensional changes due to the effects of varied water
and heat conditions and distortion out of plane
AFNOR
NF EN 2381
En Vigor
1993-01-01
Aerospace series. Aluminium alloy al-P7009 - T7452. Hand forgings 40 mm
inferior or equal to A inferior or equal to 150 mm.
AFNOR
NF EN 868-2
En Vigor
2025-04-30
Packaging for terminally sterilized medical devices - Part 2 :
sterilization wrap - Requirements and test methods
AFNOR
NF EN ISO 12629
En Vigor
2022-09-07
Thermal insulating products for building equipment and industrial
installations - Determination of water vapour transmission properties of
preformed pipe insulation
AFNOR
NF EN 13523-24
En Vigor
2017-07-26
Coil coated metals - Test methods - Part 24 : resistance to blocking and
pressure marking
AFNOR
AFNOR
NF EN 1303
Anulada
2015-07-24
Building hardware - Cylinders for locks - Requirements and test methods
AFNOR
NF EN 17915
En Vigor
2025-06-11
Chemical disinfectants and antiseptics - Quantitative nonporous surface
test without mechanical action for the evaluation of virucidal activity
of chemical disinfectants used in the food, industrial, domestic and
institutional area - Test method and requirements (phase 2, step 2)
AFNOR
NF EN ISO 12966-4
En Vigor
2015-08-08
Animal and vegetable fats and oils — Gas chromatography of fatty acid
methyl esters — Part 4: Determination by capillary gas chromatography
AFNOR
NF EN 4641-103
En Vigor
2025-05-07
Aerospace series - Cables, optical 125 µm diameter cladding - Part 103 :
semi-loose, ruggedized simplex construction 62,5 µm/125 µm GI fibre
nominal 2,74 mm, outside diameter - Product standard
AFNOR
NF EN ISO 18099
En Vigor
2022-09-07
Thermal insulating products for building equipment and industrial
installations - Determination of the coefficient of thermal expansion
AFNOR
NF EN ISO 24018
En Vigor
2026-04-02
Jewellery and precious metals - Specifications for 1 kilogram gold bar
AFNOR
NF EN 15213-5
En Vigor
2013-09-14
Intelligent transport systems - After-theft systems for the recovery of
stolen vehicles - Part 5 : messaging interface
AFNOR
NF EN 2332
En Vigor
1993-05-01
Aerospace series. Textile glass fibre preimpregnates. Test method for
the determination of the resin flow.
AFNOR
NF EN 12408
En Vigor
2004-12-01
Safety requirements for cableway installations designed to carry persons
- Quality assurance
AFNOR
AFNOR
NF EN ISO 19152-5
En Vigor
2025-08-20
Geographic information - Land Administration Domain Model (LADM) - Part
5: Spatial plan information
AFNOR
NF L22-722
En Vigor
1966-08-01
Aircraft fasteners. Hollow pins, threaded, with split pin hole (ISO
thread) (rech.).
AFNOR
NF EN 71-16
En Vigor
2025-02-26
Safety of toys - Part 16: Certain chlorinated phosphorus flame
retardants (TCEP, TCPP, TDCP) in toy materials
AFNOR
NF ISO 10987
En Vigor
2013-10-04
Earth-moving machinery - Sustainability - Terminology, sustainability
factors and reporting
AFNOR
NF ISO 6999
En Vigor
1986-09-01
Carbonaceous materials for the production of aluminium. Pitch for
electrodes. Determination of density. Pyknometric method.
AFNOR
NF EN 60439-5
En Vigor
1996-01-08
Low-voltage switchgear and controlgear assemblies. Part 5 : particular
requirements for assemblies intended to be installed outdoors in public
places. Cable distribution cabinets (cdcs) for power distribution in networks.
AFNOR
NF H00-058
En Vigor
1990-12-01
Packaging. Complete, filled transport packages. Localized compression test.
AFNOR
NF EN 17249-5
En Vigor
2025-03-05
Intelligent transport systems - eSafety - Part 5 : eCall for UNECE
category L1 and L3 powered two-wheel vehicles
AFNOR
NF ISO 6487/A1
En Vigor
2018-01-20
Road vehicles - Measurement techniques in impact tests - Instrumentation
- Amendment 1
AFNOR
AFNOR
AFNOR
NF EN ISO 17635
Anulada
2017-04-27
Non-destructive testing of welds - General rules for metallic materials
AFNOR
AFNOR
AFNOR
AFNOR
AFNOR
NF ISO 2971
Anulada
2013-07-12
Cigarettes and filter rods. Determination of nominal diameter. Method
using à laser beam measuring apparatus.
AFNOR
NF EN 16256-1
En Vigor
2012-10-01
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1 : terminology
AFNOR
NF M62-213
En Vigor
1984-07-01
Limiting enclosures. Method of control of the renewal rate per hour.
Enclosures of class 5.
AFNOR
NF EN 4530-004
En Vigor
2025-04-23
Aerospace series - Sealing sleeves used in elements of connection - Part
004 : sealing sleeves for external diameter cable 3 mm to 5,8 mm -
Product standard
