Filtrar:
AFNOR
NF EN IEC 60352-4
En Vigor
2020-07-31
Solderless connections - Part 4 : non-accessible insulation displacement
(ID) connections - General requirements, test methods and practical guidance
AFNOR
NF EN IEC 60317-27-1
En Vigor
2020-07-31
Specifications for particular types of winding wires - Part 27-1 : paper
tape covered round copper wire
AFNOR
NF EN IEC 63181-2
En Vigor
2020-07-31
LCD multi-screen display terminals - Part 2 : measuring methods
AFNOR
NF EN IEC 62645
En Vigor
2020-07-31
Nuclear power plants - Instrumentation, control and electrical power
systems - Cybersecurity requirements
AFNOR
NF EN IEC 62541-13
En Vigor
2020-07-31
OPC Unified Architecture - Part 13 : aggregates
AFNOR
NF EN IEC 60317-12
En Vigor
2020-07-31
Specifications for particular types of winding wires - Part 12 :
polyvinyl acetal enamelled round copper wire, class 120
AFNOR
NF EN 17375
En Vigor
2020-07-29
Electronic cigarettes and e-liquids - Reference e-liquids
AFNOR
XP CEN/TS 17457
En Vigor
2020-07-29
Postal services - Digital, optional online connected, opening and
closing systems for parcel receptacles for home use with free access for
the delivery and collection operators and consumers
AFNOR
NF EN 17415-1
En Vigor
2020-07-29
District cooling pipes - Bonded single pipe systems for directly buried
cold water networks - Part 1 : factory made pipe assembly of steel or
plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
AFNOR
NF EN 17414-1
En Vigor
2020-07-29
District cooling pipes - Factory made flexible pipe systems - Part 1 :
classification, general requirements and test methods
AFNOR
NF EN 17414-2
En Vigor
2020-07-29
District cooling pipes - Factory made flexible pipe systems - Part 2 :
bonded system with plastic service pipes; requirements and test methods
AFNOR
NF EN 17414-3
En Vigor
2020-07-29
District cooling pipes - Factory made flexible pipe systems - Part 3 :
non bonded system with plastic service pipes - Requirements and test methods
AFNOR
NF EN IEC 61169-63
En Vigor
2020-07-24
Radio-frequency connectors - Part 63 : sectional specification - RF
coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256
in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)
AFNOR
NF EN IEC 60664-1
En Vigor
2020-07-24
Insulation coordination for equipment within low-voltage supply systems
- Part 1 : principles, requirements and tests
AFNOR
NF EN IEC 63045
En Vigor
2020-07-24
Ultrasonics - Non-focusing short pressure pulse sources including
ballistic pressure pulse sources - Characteristics of fields
AFNOR
NF EN IEC 63182-1
En Vigor
2020-07-24
Magnetic powder cores - Guidelines on dimensions and the limits of
surface irregularities - Part 1 : general specification
AFNOR
NF EN IEC 60034-3
En Vigor
2020-07-24
Rotating electrical machines - Part 3 : specific requirements for
synchronous generators driven by steam turbines or combustion gas
turbines and for synchronous compensators
AFNOR
NF ISO 1328-2
En Vigor
2020-07-24
Cylindrical gears - ISO system of flank tolerance classification - Part
2 : definitions and allowable values of double flank radial composite deviations
AFNOR
NF EN IEC 61169-61
En Vigor
2020-07-24
Radio-frequency connectors - Part 61 : sectional specification for RF
coaxial connectors with 9,5 mm inner diameter of outer conductor, quick
lock coupling, series Q4.1-9.5
AFNOR
NF EN ISO 25239-1
En Vigor
2020-07-22
Friction stir welding - Aluminium - Part 1 : vocabulary
AFNOR
NF EN ISO 10893-9/A1
En Vigor
2020-07-22
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic
testing for the detection of laminar imperfections in strip/plate used
for the manufacture of welded steel tubes - Amendment 1 : change
acceptance criteria
AFNOR
NF EN ISO 25239-5
En Vigor
2020-07-22
Friction stir welding - Aluminium - Part 5 : quality and inspection requirements
AFNOR
NF EN 14628-1
En Vigor
2020-07-22
Ductile iron pipes, fittings and accessories - Requirements and test
methods - Part 1 : PE coatings
AFNOR
NF EN ISO 25239-3
En Vigor
2020-07-22
Friction stir welding - Aluminium - Part 3 : qualification of welding operators
AFNOR
NF EN ISO 25239-4
En Vigor
2020-07-22
Friction stir welding - Aluminium - Part 4 : specification and
qualification of welding procedures
AFNOR
NF EN ISO 25239-2
En Vigor
2020-07-22
Friction stir welding - Aluminium - Part 2 : design of weld joints
AFNOR
NF ISO 4548-5
En Vigor
2020-07-17
Methods of test for full-flow lubricating oil filters for internal
combustion engines - Part 5 : test for hydraulic pulse durability
AFNOR
NF ISO 22764
En Vigor
2020-07-17
Jewellery and precious metals - Fineness of solders used with precious
metal jewellery alloys
AFNOR
NF EN 50600-4-6
En Vigor
2020-07-17
Information technology - Data centre facilities and infrastructures -
Part 4-6 : energy Reuse Factor
AFNOR
NF A36-715
En Vigor
2020-07-17
Unpackaged steels - Long steel products intended for contact with
foodstuffs - Uncoated, non stainless, unalloyed and alloyed steels
AFNOR
NF A36-713
En Vigor
2020-07-17
Unpackaged steels - Flat steel products intended for contact with
foodstuffs - Steel with organic coating
AFNOR
NF EN ISO 20136
En Vigor
2020-07-15
Leather - Determination of degradability by micro- organisms
AFNOR
XP V03-147
En Vigor
2020-07-15
Foodstuffs - Determination of mycotoxins - Guide of use of
immunoenzymatic kits microplate format (kits ELISA)
AFNOR
NF EN ISO 4947
En Vigor
2020-07-15
Steel and cast iron - Determination of vanadium content - Potentiometric
titration method
AFNOR
AFNOR
NF EN IEC 62938
En Vigor
2020-07-10
Photovoltaic (PV) modules - Non-uniform snow load testing
AFNOR
NF EN 45553
En Vigor
2020-07-10
General method for assessing the ability of an energy-related product to
be remanufactured
AFNOR
NF ISO 12809
En Vigor
2020-07-10
Crop protection equipment - Reciprocating positive displacement pumps
and centrifugal pumps - Test method
AFNOR
NF EN IEC 61591/A11
En Vigor
2020-07-10
Cooking fume extractors - Methods for measuring performance
AFNOR
FD ISO/TR 17243-3
En Vigor
2020-07-08
Machine tool spindles - Evaluation of machine tool spindle vibrations by
measurements on spindle housing - Part 3 : gear-driven spindles with
rolling bearings operating at speeds between 600 r/min and 12 000 r/min
AFNOR
NF EN ISO 10893-11/A1
En Vigor
2020-07-08
Non-destructive testing of steel tubes - Part 11 : automated ultrasonic
testing of weld seam of welded steel tubes for the detection of
longitudinal and/or transverse imperfections - Amendment 1 : change of
ultrasonic test frequency; change of acceptance criteria
AFNOR
FD CEN ISO/TR 20174
En Vigor
2020-07-08
Welding - Grouping systems for materials - Japanese materials
AFNOR
NF EN ISO 10893-10/A1
En Vigor
2020-07-08
Non-destructive testing of steel tubes - Part 10 : automated full
peripheral ultrasonic testing of seamless and welded (except submerged
arc-welded) steel tubes for the detection of longitudinal and/or
transverse imperfections - Amendment 1 : change of ultrasonic test
frequency - change of acceptance criteria
AFNOR
NF EN 60061-3/A58
En Vigor
2020-07-03
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3 : gauges
AFNOR
NF EN IEC 62496-4-214
En Vigor
2020-07-03
Optical circuit boards - Part 4-214 : interface standards - Terminated
waveguide OCB assembly using a single-row thirty-two-channel symmetric
PMT connector
AFNOR
NF EN IEC 61643-341
En Vigor
2020-07-03
Components for low-voltage surge protection - Part 341 : performance
requirements and test circuits for thyristor surge suppressors (TSS)
AFNOR
NF EN 60061-2/A56
En Vigor
2020-07-03
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 2 : lampholders
AFNOR
NF EN IEC 60667-2
En Vigor
2020-07-03
Vulcanized fibre for electrical purposes - Part 2 : methods of test
AFNOR
NF EN 50174-1/A1
En Vigor
2020-07-03
Information technology - Cabling installation - Part 1 : installation
specification and quality assurance
AFNOR
NF EN IEC 62384
En Vigor
2020-07-03
DC or AC supplied electronic controlgear for LED modules - Performance requirements
AFNOR
AFNOR
NF L22-588
En Vigor
2020-06-27
Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with
counterbore, ISO M or ISO MJ threads, in corrosion resisting steel,
silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
AFNOR
NF L22-590
En Vigor
2020-06-27
Aircraft bolts and nuts - Nuts, anchor, self-locking, 60o corner, with
counterbore, ISO M or ISO MJ threads, in corrosion resisting steel,
silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
AFNOR
NF L22-596
En Vigor
2020-06-27
Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single
lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting
steel, silver plated - Classification : 1 100 MPa (at ambient
temperature)/425 oC
AFNOR
NF EN IEC 60519-8
En Vigor
2020-06-26
Safety in installations for electroheating and electromagnetic
processing - Part 8 : particular requirements for electroslag remelting furnaces
AFNOR
NF EN IEC 60317-61
En Vigor
2020-06-26
Specifications for particular types of winding wires - Part 61 :
polyester glass-fibre wound, resin or varnish impregnated, bare or
enamelled rectangular copper wire, temperature index 180
AFNOR
NF EN IEC 60721-3-0
En Vigor
2020-06-26
Classification of environmental conditions - Part 3-0 : classification
of groups of environmental parameters and their severities - Introduction
AFNOR
NF EN IEC 63132-4
En Vigor
2020-06-26
Guidance for installation procedures and tolerances of hydroelectric
machines - Part 4 : vertical Kaplan or propeller turbines
AFNOR
NF EN IEC 60565-1
En Vigor
2020-06-26
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1
: procedures for free-field calibration of hydrophones
AFNOR
NF EN IEC 62351-8
En Vigor
2020-06-26
Power systems management and associated information exchange - Data and
communications security - Part 8 : role-based access control for power
system management
