Filtrar:
AFNOR
NF EN 378-1+A1
En Vigor
2020-10-28
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 1 : basic requirements, definitions, classification
and selection criteria
AFNOR
AFNOR
NF EN 10209
Anulada
2023-08-02
Cold rolled low carbon steel flat products for vitreous enamelling -
Technical delivery conditions
AFNOR
NF ISO 8178-4
En Vigor
2020-09-26
Reciprocating internal combustion engines - Exhaust emission measurement
- Part 4 : steady-state and transient test cycles for different engine applications
AFNOR
NF EN 10301
En Vigor
2004-03-01
Steel tubes and fittings for on and offshore pipelines - Internal
coating for the reduction of friction for conveyance of non corrosive gas
AFNOR
NF EN 13487
En Vigor
2019-08-07
Heat exchanger - Forced convection air cooled refrigerant condensers and
dry coolers - Sound measurement
AFNOR
NF EN 61400-25-4
En Vigor
2017-04-29
Wind energy generation systems - Part 25-4 : communications for
monitoring and control of wind power plants - Mapping to communication profile
AFNOR
AFNOR
NF EN 17038-2
En Vigor
2019-05-08
Pumps - Methods of qualification and verification of the energy
efficiency index for rotodynamic pump units - Part 2 : testing and
calculation of energy efficiency index (EEI) of single pump units
AFNOR
NF C61-460/A1
En Vigor
2003-12-01
Electrical accessories - Portable residual current devices without
intergral overcurrent protection for household and similar use (PRCDs)
AFNOR
NF EN ISO 9606-3
En Vigor
1999-06-01
Approval testing of welders. Fusion welding. Part 3 : copper and copper alloys.
AFNOR
NF ISO 4392-1
En Vigor
2002-10-01
Hydraulic fluid power - Determination of characteristics of motors -
Part 1 : at constant low speed and constant pressure
AFNOR
NF EN 61643-21/A2
En Vigor
2013-07-19
Low voltage surge protective devices - Part 21 : surge protective
devices connected to telecommunications and signalling networks -
Performance requirements and testing methods
AFNOR
NF EN ISO 9220
En Vigor
2022-02-23
Metallic coatings - Measurement of coating thickness - Scanning electron
microscope method
AFNOR
NF ISO 10099
En Vigor
2001-07-01
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
AFNOR
NF C66-231
En Vigor
1981-07-01
Insulators and fittings for overhead lines. Glass insulators of the cap
and pin type. Characteristics. Dimensions.
AFNOR
NF ISO 12500-3
En Vigor
2009-09-01
Filters for compressed air - Test methods - Part 3 : particulates
AFNOR
NF B10-601/A1
En Vigor
2021-08-28
Quarry products - Natural stones - General prescriptions for use of
natural stones - Amendment 1
AFNOR
NF EN IEC 63286
En Vigor
2022-11-04
Flexible organic light emitting diode (OLED) panels for general lighting
- Performance requirements
AFNOR
AFNOR
NF EN 50564
En Vigor
2012-03-01
Electrical and electronic household and office equipment - Measurement
of low power consumption
AFNOR
AFNOR
AFNOR
NF EN 1915-3+A1
En Vigor
2010-12-01
Aircraft ground support equipment - General requirements - Part 3 :
vibration measurement methods and reduction
AFNOR
NF EN 60335-2-38
En Vigor
2005-09-01
Household and similar electrical appliances - Safety - Part 2-38 :
particular requirements for commercial electric griddles and griddle grills
AFNOR
NF EN 50341-2-8
En Vigor
2017-10-06
Overhead electrical lines exceeding AC 1 kV - Part 2-8 : national
normative aspects (NNA) for France (based on EN 50341-1:2012)
AFNOR
NF EN 60335-2-109
En Vigor
2011-04-01
Household and similar electrical appliances - Safety - Part 2-109 :
particular requirements for UV radiation water treatment appliances
AFNOR
NF ISO 21507
En Vigor
2010-11-01
Earth-moving machinery - Performance requirements for non-metallic fuel tanks
AFNOR
NF EN 62363
En Vigor
2011-09-01
Radiation protection instrumentation - Portable photon contamination
meters and monitors
AFNOR
NF EN IEC 60601-2-50
En Vigor
2021-07-16
Medical electrical equipment - Part 2-50 : particular requirements for
the basic safety and essential performance of infant phototherapy equipmen
AFNOR
NF EN 12629-5-1+A1
En Vigor
2010-11-01
Machines for the manufacture of constructional products from concrete
and calcium-silicate - Safety - Part 5-1 : pipe making machines
manufacturing in the vertical axis
AFNOR
NF EN 60068-2-81
En Vigor
2004-02-01
Environmental testing - Part 2-81 : tests - Test Ei : shock - Shock
response spectrum synthesis
AFNOR
FD ISO/TR 17243-3
En Vigor
2020-07-08
Machine tool spindles - Evaluation of machine tool spindle vibrations by
measurements on spindle housing - Part 3 : gear-driven spindles with
rolling bearings operating at speeds between 600 r/min and 12 000 r/min
AFNOR
AFNOR
NF EN 60455-3-5
En Vigor
2006-07-01
Resin based reactive compounds used for electrical insulation - Part 3 :
specifications for individual materials - Sheet 5 : unsaturated
polyester based impregnating resins
AFNOR
NF EN ISO 11161/A1
En Vigor
2010-05-01
Safety of machinery - Integrated manufacturing systems - Basic
requirements - Amendment 1
AFNOR
NF EN 50065-4-7
En Vigor
2005-11-01
Signalling on low-voltage electrical installations in the frequency
range 3 kHz to 148,5 kHz and from 1,6 MHz to 30 MHz - Part 4-7 :
portable low voltage decoupling filters - Safety requirements
AFNOR
NF EN 1612
En Vigor
2019-10-16
Plastics and rubber machines - Reaction moulding machines and plants -
Safety requirements
AFNOR
NF EN 61000-4-4
En Vigor
2013-02-28
Electromagnetic compatibility (EMC) - Part 4-4 : testing and measurement
techniques - Electrical fast transient/burst immunity test
AFNOR
NF EN 60811-602
En Vigor
2012-12-01
Electric and optical fibre cables - Test methods for non-metallic
materials - Part 602 : physical tests - Separation of oil in filling compounds
AFNOR
NF EN IEC 62037-7
En Vigor
2022-12-09
Passive RF and microwave devices, intermodulation level measurement -
Part 7: Field measurements of passive intermodulation
AFNOR
NF EN IEC 61010-2-034/A11
En Vigor
2021-04-09
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 2-034 : particular requirements for
measurement equipment for insulation resistance and test equipment for
electric strength
AFNOR
NF EN 60512-2-2
En Vigor
2003-11-01
Connectors for electronic equipment - Tests and measurements - Part 2-2
: electrical continuity and contact resistance tests - Test 2b : contact
resistance - Specified test current method
AFNOR
NF C93-527-10
En Vigor
1992-12-01
Telecommunications local networks cables with polyolefin insulation and
polyolefin sheath - Product standards
AFNOR
NF EN 61755-3-6
En Vigor
2007-03-01
Fibre optic connector optical interfaces - Part 3-6 : optical interface
- 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite
ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
AFNOR
NF EN 61189-5-3
En Vigor
2015-06-13
Test methods for electrical materials, printed boards and other
interconnection structures and assemblies - Part 5-3 : general test
methods for materials and assemblies - Soldering paste for printed board
assemblies
AFNOR
NF EN IEC 62228-6
En Vigor
2022-12-16
Integrated circuit - EMC evaluation of transceivers - Part 6 : PSI5 transceivers
AFNOR
AFNOR
NF EN 61319-1
En Vigor
1996-04-01
Interconnections of satellite receiving equipment. Part 1 : europe.
AFNOR
NF EN 10247
En Vigor
2017-07-12
Micrographic examination of the non-metallic inclusion content of steels
using standard pictures
AFNOR
NF EN 60870-5-103
En Vigor
1998-05-01
Telecontrol equipment and systems. Part 5-103 : transmission protocols.
Companion standard for the informative interface of protection equipment.
AFNOR
NF EN 10276-2
En Vigor
2003-11-01
Chemical analysis of ferrous materials - Determination of oxygen content
in steel and iron - Part 2 : infrared method after fusion under inert gas
AFNOR
NF EN 60034-16-1
En Vigor
2011-11-01
Rotating electrical machines - Part 16-1 : excitation systems for
synchronous machines - Definitions
AFNOR
NF EN 15720
En Vigor
2010-01-01
Sanitary appliances - Shower trays made from impact modified coextruded
ABS/acrylic sheets - Requirements and test methods
AFNOR
NF EN 13925-3
En Vigor
2005-10-01
Non destructive testing - X-ray diffraction from polycrystalline and
amorphous materials - Part 3 : instruments
AFNOR
NF EN IEC 61753-071-02
En Vigor
2020-10-30
Fibre optic interconnecting devices and passive components - Performance
standard - Part 071-02 : non-connectorized single-mode fibre optic 1 × 2
and 2 × 2 spatial switches for category C - Controlled environments
AFNOR
AFNOR
NF EN 10111
En Vigor
2008-09-01
Continuously hot rolled low carbon steel sheet and strip for cold
forming - Technical delivery conditions
AFNOR
AFNOR
NF EN 61056-2
En Vigor
2013-03-20
General purpose lead-acid batteries (valve-regulated types) - Part 2 :
dimensions, terminals and marking
