Filtrar:
DIN
DIN EN 14620-5:2025-12
En Vigor
2025-12-01
Design and manufacture of site built, vertical, cylindrical,
flat-bottomed tank systems for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and -196 °C - Part 5:
Testing, drying, purging and cool-down; German version EN 14620-5:2025
DIN
DIN EN ISO 11125-5:2025-12
En Vigor
2025-12-01
Preparation of steel substrates before application of paints and related
products - Test methods for metallic blast-cleaning abrasives - Part 5:
Determination of percentage defective particles and of microstructure
(ISO 11125-5:2025); German version EN ISO 11125-5:2025
DIN
DIN 45687-2:2025-06
En Vigor
2025-12-01
Acoustics - Software for the calculation of sound outdoors - Part 2:
Conformity assessment / Note: Date of issue 2025-05-02*Applies in
conjunction with DIN 45687-1 (2025-06).
DIN
DIN EN 13763-4:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
4: Verification of resistance to abrasion of leading wires and shock
tubes; German version EN 13763-4:2025
DIN
DIN EN 3381:2025-04
En Vigor
2025-12-01
Aerospace series - Screws, 100° countersunk normal head, offset
cruciform recess, close tolerance normal shank, short thread, in
titanium alloy, anodized, MoS<(Index)2> lubricated -
Classification: 1 100 MPa (at ambient temperature) / 315 °C; German
version ASD-STAN prEN 3381:2025 / Note: Date of issue 2025-03-21
DIN
DIN 6900-5:2004-09
En Vigor
2025-12-01
Screw and washer assemblies with coarse thread - Part 5: With captive
conical spring washer
DIN
DIN EN IEC 63267-2-1:2025-06
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces for enhanced macro bend multimode fibres - Part 2-1:
Connection parameters of physically contacting 50 µm core diameter
fibres - Non-angled (IEC 63267-2-1:2024); German version EN IEC
63267-2-1:2024 / Note: Date of issue 2025-05-02
DIN
DIN EN IEC 62541-7:2025-12
En Vigor
2025-12-01
OPC Unified Architecture - Part 7: Profiles (IEC 65E/1054/CDV:2024);
English version prEN IEC 62541-7:2024 / Note: Date of issue
2025-11-14*Intended as replacement for DIN EN IEC 62541-7 (2021-08).
DIN
DIN EN 17353:2025-12
En Vigor
2025-12-01
Protective clothing - Enhanced visibility equipment for medium risk
situations - Test methods and requirements; German version EN 17353:2020+A1:2025
DIN
DIN EN ISO 15118-21:2024-07
En Vigor
2025-12-01
Road vehicles - Vehicle to grid communication interface - Part 21:
Common 2nd generation network layer and application layer requirements
conformance test plan (ISO/DIS 15118-21:2024); English version prEN ISO
15118-21:2024 / Note: Date of issue 2024-06-21
DIN
DIN EN 4914-100:2025-12
En Vigor
2025-12-01
Aerospace series - Test procedures for electromechanical all-or-nothing
relays; German and English version prEN 4914-100:2025 / Note: Date of
issue 2025-11-14
DIN
DIN EN ISO 21043-3:2024-06
En Vigor
2025-12-01
Forensic Sciences - Part 3: Analysis (ISO/DIS 21043-3:2024); German and
English version prEN ISO 21043-3:2024 / Note: Date of issue 2024-05-17
DIN
DIN
DIN EN ISO/IEEE 11073-10472:2024-06
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10472: Personal
health device communication - Device specialization - Medication monitor
(ISO/IEEE FDIS 11073-10472:2024); English version prEN ISO/IEEE
11073-10472:2024 / Note: Date of issue 2024-05-24
DIN
DIN EN ISO 11980:2013-03
En Vigor
2025-12-01
Ophthalmic optics - Contact lenses and contact lens care products -
Guidance for clinical investigations (ISO 11980:2012); German version EN
ISO 11980:2012
DIN
DIN 19713:2025-12
En Vigor
2025-12-01
Soil quality - Instructions for mapping erosion and accumulation forms
caused by wind
DIN
DIN EN ISO 11300-4:2025-12
En Vigor
2025-12-01
Piping systems for rehabilitation of underground drains, sewers and
water supply networks - Part 4: Thermoplastic composite materials
(ISO/DIS 11300-4:2025); German and English version prEN ISO 11300-4:2025
/ Note: Date of issue 2025-11-14
DIN
DIN EN ISO 25178-605:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
605: Design and characteristics of non-contact (point autofocus probe)
instruments (ISO 25178-605:2025); German version EN ISO 25178-605:2025
DIN
DIN/TS 10107:2025-12
En Vigor
2025-12-01
Hunting - Wildlife biology - Hunting seasons for efficient, species- and
animal welfare-friendly hunting of wild ruminants
DIN
DIN EN 60317-15/A2:2025-12
En Vigor
2025-12-01
Specifications for particular types of winding wires - Part 15:
Polyesterimide enamelled round aluminium wire, class 180 (IEC
60317-15:2004/AMD2:2024); German version EN 60317-15:2004/A2:2024 /
Note: Date of issue 2025-11-21*Intended as an amendment to DIN EN
60317-15 (2010-12).
