Filtrar:
DIN
DIN EN 13630-7:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 7:
Determination of reliability of initiation of detonating cords; German
and English version prEN 13630-7:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 32543-1:2025-12
En Vigor
2025-12-01
Non-destructive testing - Characteristics of focal spots in industrial
X-ray systems - Part 1: Pinhole camera radiographic method (ISO
32543-1:2024); German version EN ISO 32543-1:2025
DIN
DIN 35911:2024-04
En Vigor
2025-12-01
Automatic electrical controls for installation in drinking water systems
- Requirements for solenoid valves / Note: Date of issue 2024-03-15
DIN
DIN EN 13763-21:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
21: Determination of flash-over voltage of electric detonators; German
and English version prEN 13763-21:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 25178-602:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
602: Design and characteristics of non-contact (confocal chromatic
probe) instruments (ISO 25178-602:2025); German version EN ISO 25178-602:2025
DIN
DIN 6858-201:2024-05
En Vigor
2025-12-01
Calibration and Quantification of the SPECT/CT - Part 201: Calibration
of the SPECT/CT for Lu-177 / Note: Date of issue 2024-03-29
DIN
DIN EN 13763-13:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
13: Verification of the resistance to electrostatic discharge (ESD) of
electric and electronic detonators; German version EN 13763-13:2025
DIN
DIN EN 15383:2025-12
En Vigor
2025-12-01
Plastics piping systems for drainage and sewerage - Glass-reinforced
thermosetting plastics (GRP) based on polyester resin (UP) - Manholes
and inspection chambers; German and English version prEN 15383:2025 /
Note: Date of issue 2025-11-07*Intended as replacement for DIN EN 15383 (2014-02).
DIN
DIN EN IEC 61755-3-2:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces - Part 3-2: Connector parameters of dispersion
unshifted single-mode physically contacting fibres - Angled 2,5 mm and
1,25 mm diameter cylindrical full zirconia ferrules (IEC
61755-3-2:2024); German version EN IEC 61755-3-2:2024
DIN
DIN EN ISO 15118-21:2025-12
En Vigor
2025-12-01
Road vehicles - Vehicle to grid communication interface - Part 21:
Common 2nd generation network layer and application layer requirements
conformance test plan (ISO 15118-21:2025); English version EN ISO 15118-21:2025
DIN
DIN EN ISO/IEEE 11073-10701:2025-12
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10701: Point-of-care
medical device communication - Metric provisioning by participants in a
Service-oriented Device Connectivity (SDC) system (ISO/IEEE
11073-10701:2024); English version EN ISO/IEEE 11073-10701:2025
DIN
DIN EN ISO 4064-5:2025-12
En Vigor
2025-12-01
Water meters for cold potable water and hot water - Part 5: Installation
requirements (ISO 4064-5:2025); German version EN ISO 4064-5:2025 /
Note: This standard is part of the DVGW body of rules.
DIN
DIN EN 13857-1:2003-10
En Vigor
2025-12-01
Explosives for civil uses - Part 1: Terminology; German version EN 13857-1:2003
DIN
DIN EN 13763-11:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 11:
Determination of resistance to damage by dropping of detonators and
relays; German version EN 13763-11:2003
DIN
DIN EN ISO 7199:2024-12
En Vigor
2025-12-01
Cardiovascular implants and artificial organs - Blood-gas exchangers
(oxygenators) (ISO 7199:2024); German version EN ISO 7199:2024
DIN
DIN EN 13763-20:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 20:
Determination of total resistance of electric detonators; German version
EN 13763-20:2003
DIN
DIN EN ISO 19085-12/A11:2023-07
En Vigor
2025-12-01
Woodworking machines - Safety - Part 12: Tenoning/profiling machines
(ISO 19085-12:2021); German version EN ISO 19085-12:2021/A11:2023
DIN
DIN 16272:2025-05
En Vigor
2025-12-01
PN 250 and PN 400 valves with shut-off test connection for pressure
gauges / Note: Date of issue 2025-04-11
DIN
DIN EN 13763-23:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
23: Determination of the shock-wave velocity of shock tube; German and
English version prEN 13763-23:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 22477-5/A100:2025-12
En Vigor
2025-12-01
Geotechnical investigation and testing - Testing of geotechnical
structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018);
German version EN ISO 22477-5:2018; Amendment A100 / Note: Date of issue
2025-11-14*Intended as an amendment to DIN EN ISO 22477-5 (2019-05).
