Filtrar:
DIN
DIN EN IEC 61755-3-7:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces - Part 3-7: Connector parameters of non-dispersion
shifted single mode physically contacting fibres - non-angled 2,5 mm and
1,25 mm diameter cylindrical composite ferrules using titanium as fibre
surrounding material (IEC 86B/5069/CDV:2025); German and English version
prEN IEC 61755-3-7:2025 / Note: Date of issue 2025-11-28*Intended as
replacement for DIN EN 61755-3-7 (2009-09).
DIN
DIN 32705:2025-08
En Vigor
2025-08-01
Classification Systems - Establishment and development of classification systems
DIN
DIN
DIN EN ISO 8502-5:2025-09
En Vigor
2025-09-01
Preparation of steel substrates before application of paints and related
products - Tests for the assessment of surface cleanliness - Part 5:
Measurement of chloride on steel surfaces prepared for painting (ion
detection tube method) (ISO 8502-5:2025); German version EN ISO 8502-5:2025
DIN
DIN EN ISO 10325:2025-09
En Vigor
2025-09-01
Fibre ropes - High modulus polyethylene - 8-strand braided ropes,
12-strand braided ropes and covered ropes (ISO/DIS 10325:2025); German
and English version prEN ISO 10325:2025 / Note: Date of issue
2025-07-25*Intended as replacement for DIN EN ISO 10325 (2019-01).
DIN
DIN 2827:2025-11
En Vigor
2025-11-01
Hose assemblies of stainless steel for chemical products / Note: Date of
issue 2025-10-10*Intended as replacement for DIN 2827 (2006-07).
DIN
DIN
DIN EN ISO/IEEE 11073-10701:2024-07
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10701: Point-of-Care
Medical Device Communication - Metric Provisioning by Participants in a
Service-Oriented Device Connectivity (SDC) System (ISO/IEEE FDIS
11073-10701:2024); English version prEN ISO IEEE 11073-10701:2024 /
Note: Date of issue 2024-05-31
DIN
DIN EN ISO 3170 Berichtigung 1:2007-12
En Vigor
2025-12-01
Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN
ISO 3170:2004, Corrigenda to DIN EN ISO 3170:2004-06
DIN
DIN
DIN ISO 8588:2025-07
En Vigor
2025-07-01
Sensory analysis - Methodology - "A"-"not A" test
(ISO 8588:2017)
DIN
DIN 45667-1:2025-12
En Vigor
2025-12-01
Classification methods for the evaluation of irregular oscillations -
Part 1: Fundamentals of the classification of irregular oscillations -
Reversal point sequence
DIN
DIN EN 15383:2025-02
En Vigor
2025-12-01
Plastics piping systems for drainage and sewerage - Glass-reinforced
thermosetting plastics (GRP) based on polyester resin (UP) - Manholes
and inspection chambers; German and English version prEN 15383:2025 /
Note: Date of issue 2025-01-10
DIN
DIN EN ISO 4491-3:2006-06
En Vigor
2025-12-01
Metallic powders - Determination of oxygen content by reduction methods
- Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997); German version EN
ISO 4491-3:2006
DIN
DIN 55524-2:2025-07
En Vigor
2025-07-01
Packaging - Attributes - Part 2: Attributes for packaging made of solid
fibreboard / Note: Date of issue 2025-05-30*Intended as replacement for
DIN 55524-2 (2016-08).
DIN
DIN EN 16072:2025-07
En Vigor
2025-07-01
Intelligent transport systems - eSafety - Pan-European eCall operating
requirements; German version EN 16072:2025
DIN
DIN 1833:2025-12
En Vigor
2025-12-01
Inverse dovetail cutters and dovetail cutters with parallel shank -
Dimensions and technical delivery conditions / Note: Date of issue
2025-11-21*Intended as replacement for DIN 1833-1 (1989-04), DIN 1833-2 (1990-04).
DIN
DIN EN 71-7:2024-12
En Vigor
2025-12-01
Safety of toys - Part 7: Finger paints - Requirements and test methods;
German and English version prEN 71-7:2024 / Note: Date of issue 2024-11-22
DIN
DIN EN ISO 4064-5:2017-10
En Vigor
2025-12-01
Water meters for cold potable water and hot water - Part 5: Installation
requirements (ISO 4064-5:2014); German version EN ISO 4064-5:2017 /
Note: This standard is part of the DVGW body of rules.
DIN
DIN EN ISO 21805/A1:2025-07
En Vigor
2025-07-01
Guidance and recommendations on design, selection and installation of
vents to safeguard the structural integrity of enclosures protected by
gaseous fire-extinguishing systems - Amendment 1 (ISO 21805:2023/DAM
1:2025); German and English version EN ISO 21805:2023/prA1:2025 / Note:
Date of issue 2025-06-13*Intended as an amendment to DIN EN ISO 21805 (2023-07).
