Filtrar:
DIN
DIN EN 16714-2:2016-11
En Vigor
2016-11-01
Non-destructive testing - Thermographic testing - Part 2: Equipment;
German version EN 16714-2:2016
DIN
DIN EN 248 Berichtigung 1:2017-05
En Vigor
2017-05-01
Sanitary tapware - General specification for electrodeposited coatings
of Ni-Cr; German version EN 248:2002, Corrigendum to DIN EN 248:2003-01
DIN
DIN EN IEC 61123:2020-02
En Vigor
2020-02-01
Reliability testing - Compliance test plans for success ratio (IEC
56/1831/CDV:2019); German and English version prEN IEC 61123:2019 /
Note: Date of issue 2020-01-31*Intended as replacement for DIN IEC 61123 (1993-08).
DIN
DIN ISO/IEC 8882-1:1997-06
En Vigor
1997-06-01
Data communication - X.25 DTE conformance testing - General principles;
identical with ISO/IEC 8882-1:1996
DIN
DIN 3991-4:2025-10
En Vigor
2026-07-01
Calculation of load capacity of bevel gears - Part 4: Calculation of
scuffing load capacity - Flash temperature method / Note: Date of issue 2025-09-12
DIN
DIN EN ISO 2825:2010-06
En Vigor
2026-07-01
Spices and condiments - Preparation of a ground sample for analysis (ISO
2825:1981); German version EN ISO 2825:2010
DIN
DIN EN 15182-3:2019-11
En Vigor
2019-11-01
Portable equipment for projecting extinguishing agents supplied by
firefighting pumps - Hand-held branchpipes for fire service use - Part
3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16;
German version EN 15182-3:2019
DIN
DIN ISO 9276-4:2019-09
En Vigor
2019-09-01
Representation of results of particle size analysis - Part 4:
Characterization of a classification process (ISO 9276-4:2001 + Amd.1:2017)
DIN
DIN ISO 12884:2000-12
En Vigor
2000-12-01
Ambient air - Determination of total (gas and particle phase) polycyclic
aromatic hydrocarbons - Collection on sorbent-backed filters with gas
chromatographic/mass spectrometric analysis (ISO 12884:2000)
DIN
DIN EN 4165-009:2008-11
En Vigor
2008-11-01
Aerospace series - Connectors, electrical, rectangular, modular -
Operating temperature 175 °C continuous - Part 009: Rack and panel plug
for 2 and 4 modules, series 3 - Product standard; German and English
version EN 4165-009:2007 / Note: To be replaced by DIN EN 4165-009 (2022-02).
DIN
DIN EN 300659-2:2001-12
En Vigor
2001-12-01
Access and terminals (AT) - Analogue access to the Public Switched
Telephone Network (PSTN); Subscriber line protocol over the local loop
for display (and related) services - Part 2: Off-hook data transmission
(Endorsement of the English version EN 300659-2 V 1.3.1 (2001-01) as
German Standard) / Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN 13241:2016-12
En Vigor
2016-12-01
Industrial, commercial, garage doors and gates - Product standard,
performance characteristics; German version EN 13241:2003+A2:2016 /
Note: To be replaced by DIN EN 13241 (2020-11), DIN EN 13241 (2022-03).
DIN
DIN ISO 8764-1:2006-01
En Vigor
2006-01-01
Assembly tools for screws and nuts - Screwdrivers for cross-recessed
head screws - Part 1: Driver tips (ISO 8764-1:2004)
DIN
DIN EN 10243-1 Berichtigung 2:2007-12
En Vigor
2007-12-01
Steel die forgings - Tolerances on dimensions - Part 1: Drop and
vertical press forgings; German version EN 10243-1:1999, Corrigenda to
DIN EN 10243-1:2000-06
DIN
DIN EN 13286-2:2013-02
En Vigor
2013-02-01
Unbound and hydraulically bound mixtures - Part 2: Test methods for
laboratory reference density and water content - Proctor compaction;
German version EN 13286-2:2010 + AC:2012
DIN
DIN CEN/TR 17063:2018-01;DIN SPEC 10489:2018-01
En Vigor
2018-01-01
Foods of plant origin - Multimethod for the determination of pesticide
residues using GC- or LC-based analysis following acetonitrile
extraction/partitioning and cleanup by dispersive SPE - Validation data
of the modular QuEChERS-method; German version CEN/TR 17063:2017
DIN
DIN ISO 11900-3:2005-09
En Vigor
2005-09-01
Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced
for heavy duty (ISO 11900-3:2004)
DIN
DIN EN 12620:2008-07
En Vigor
2008-07-01
Aggregates for concrete; German version EN 12620:2002+A1:2008 / Note: To
be replaced by DIN EN 12620 (2011-03), DIN EN 12620 (2015-07), DIN EN
17555-1 (2021-07).
DIN
DIN ISO 8486-2:2012-04
En Vigor
2012-04-01
Bonded abrasives - Determination and designation of grain size
distribution - Part 2: Microgrits F230 to F2000 (ISO 8486-2:2007)
DIN
DIN ISO 603-5:2000-05
En Vigor
2000-05-01
Bonded abrasives products - Dimensions - Part 5: Grinding wheels for
surface grinding/face grinding (ISO 603-5:1999)
