Filtrar:
DIN
DIN EN ISO 23697-1:2025-08
En Vigor
2025-08-01
Water quality - Determination of total bound nitrogen
(ST-TN<(Index)b>) in water using small-scale sealed tubes - Part
1: Dimethylphenol colour reaction (ISO 23697-1:2023); German and English
version prEN ISO 23697-1:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN 161:2025-08
En Vigor
2025-08-01
Automatic shut-off valves for gas burners and gas appliances; German
version EN 161:2022+A1:2025 / Note: DIN EN 161 (2024-02) remains valid
alongside this standard until 2028-04-30.
DIN
DIN EN ISO 5667-15:2025-08
En Vigor
2025-08-01
Water quality - Sampling - Part 15: Preservation and handling of samples
of sludge, sediment and suspended matter (ISO/DIS 5667-15:2025); German
and English version prEN ISO 5667-15:2025 / Note: Date of issue
2025-07-04*Intended as replacement for DIN EN ISO 5667-15 (2010-01).
DIN
DIN EN ISO 11816-2:2025-08
En Vigor
2025-08-01
Milk and milk products - Determination of alkaline phosphatase activity
- Part 2: Fluorimetric method for cheese (ISO 11816-2:2024); German
version EN ISO 11816-2:2024
DIN
DIN EN 4650:2025-08
En Vigor
2025-08-01
Aerospace series - Wire and cable marking process, UV Laser; German and
English version prEN 4650:2025 / Note: Date of issue 2025-07-04*Intended
as replacement for DIN EN 4650 (2023-06).
DIN
DIN EN 1846-3:2025-08
En Vigor
2025-08-01
Firefighting and rescue service vehicles - Part 3: Permanently installed
equipment - Safety and performance; German and English version prEN
1846-3:2025 / Note: Date of issue 2025-07-11*Intended as replacement for
DIN EN 1846-3 (2013-11).
DIN
DIN EN 4604-010:2025-08
En Vigor
2025-08-01
Aerospace series - Cable, electrical, for signal transmission - Part
010: Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (light WD) -
Product standard; German version ASD-STAN prEN 4604-010:2025 / Note:
Date of issue 2025-06-27*Intended as replacement for DIN EN 4604-010 (2018-10).
DIN
DIN EN 15626:2025-08
En Vigor
2025-08-01
Bitumens and bituminous binders - Determination of adhesivity of
cut-back and fluxed bituminous binders by water immersion test -
Aggregate method; German version EN 15626:2025
DIN
DIN EN 3475-810:2025-08
En Vigor
2025-08-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 810: Structural return loss; German version ASD-STAN prEN
3475-810:2025 / Note: Date of issue 2025-06-27*Intended as replacement
for DIN EN 3475-810 (2009-10).
DIN
DIN EN 18210:2025-08
En Vigor
2025-08-01
Algae and algae Products - Determination of the fatty acid composition;
German and English version prEN 18210:2025 / Note: Date of issue 2025-07-18
DIN
DIN 70112-1001:2025-08
En Vigor
2025-08-01
Road vehicles - Electrical cables - Part 1001: Test matrix for DIN/TS 70112-1
DIN
DIN EN 15011:2025-08
En Vigor
2025-08-01
Cranes - Bridge and gantry cranes; German and English version prEN
15011:2025 / Note: Date of issue 2025-07-04*Intended as replacement for
DIN EN 15011 (2022-08).
DIN
DIN EN 88-3:2025-08
En Vigor
2025-08-01
Safety and control devices for gas burners and gas burning appliances -
Part 3: Pressure and/or flow rate regulators for inlet pressures up to
and including 500 kPa, electronic types; German version EN
88-3:2022+A1:2024 / Note: DIN EN 88-3 (2024-02) remains valid alongside
this standard until 2027-11-30.
DIN
DIN EN 613/A1:2025-08
En Vigor
2025-08-01
Independent closed-fronted gas-fired type B11, type C11, type C31 and
type C91 heaters; German and English version EN 613:2021/prA1:2025 /
Note: Date of issue 2025-07-11*Intended as an amendment to DIN EN 613 (2022-05).
DIN
DIN EN 3740:2025-08
En Vigor
2025-08-01
Aerospace series - Bolts, shouldered, thin hexagonal head, close
tolerance shank, short thread, in titanium alloy, anodized,
MoS<(Index)2> coated - Classification: 1100 MPa (at ambient
temperature)/315 °C; German and English version prEN 3740:2025 / Note:
Date of issue 2025-07-11*Intended as replacement for DIN EN 3740 (2019-12).
DIN
DIN EN ISO 11140-3:2025-08
En Vigor
2025-08-01
Sterilization of health care products - Chemical indicators - Part 3:
Type 2 indicators for use in the Bowie and Dick-type steam penetration
test (ISO/DIS 11140-3:2025); German and English version prEN ISO
11140-3:2025 / Note: Date of issue 2025-07-18*Intended as replacement
for DIN EN ISO 11140-3 (2009-09).
DIN
DIN ISO 17208-1/A1:2025-08
En Vigor
2025-08-01
Underwater acoustics - Quantities and procedures for description and
measurement of underwater sound from ships - Part 1: Requirements for
precision measurements in deep water used for comparison purposes;
Amendment 1 (ISO 17208-1:2016/Amd.1:2024); Text in German and English /
Note: Date of issue 2025-07-18*Intended as an amendment to DIN ISO
17208-1 (2018-03).
DIN
DIN EN ISO 17633:2025-08
En Vigor
2025-08-01
Welding consumables - Tubular cored electrodes and rods for gas shielded
and non-gas shielded metal arc welding of stainless and heat-resisting
steels - Classification (ISO 17633:2025); German version EN ISO 17633:2025
DIN
DIN ISO 17631:2025-08
En Vigor
2025-08-01
Ships and marine technology - Shipboard plans for fire control, damage
control, life-saving appliances and means of escape (ISO 17631:2022)
DIN
