Filtrar:
DIN
DIN EN 15843:2010-05
En Vigor
2025-12-01
Water quality - Guidance standard on determining the degree of
modification of river hydromorphology; German version EN 15843:2010
DIN
DIN EN ISO 11073-10103:2014-06
En Vigor
2025-12-01
Health informatics - Point-of-care medical device communication - Part
10103: Nomenclature - Implantable device, cardiac (ISO/IEEE
11073-10103:2014); English version EN ISO 11073-10103:2013
DIN
DIN EN 13848-4:2025-11
En Vigor
2025-11-01
Railway applications - Track - Track geometry quality - Part 4:
Measuring systems - Manual and lightweight devices; German version EN 13848-4:2025
DIN
DIN 14677-2:2025-09
En Vigor
2025-09-01
Maintenance of electrically controlled hold-open systems for fire and
smoke door assemblies as well as for electrically controlled hold-open
systems for fire barriers in the course of ground-bound conveying
systems - Part 2: Minimum qualification and proof of competence of
maintenance personnel / Note: Date of issue 2025-07-25*Intended as
replacement for DIN 14677-2 (2018-08).
DIN
DIN EN 15220:2025-09
En Vigor
2025-09-01
Railway applications - Brake indicators; German version EN 15220:2025
DIN
DIN EN 12953-6:2025-09
En Vigor
2025-09-01
Shell Boilers - Part 6: Requirements for equipment for the boiler;
German version EN 12953-6:2024
DIN
DIN EN ISO 877-3:2025-08
En Vigor
2025-08-01
Plastics - Methods of exposure to solar radiation - Part 3: Intensified
weathering using concentrated solar radiation (ISO/DIS 877-3:2025);
German and English version prEN ISO 877-3:2025 / Note: Date of issue
2025-07-04*Intended as replacement for DIN EN ISO 877-3 (2018-09).
DIN
DIN CEN ISO/TS 16901:2025-11
En Vigor
2025-11-01
Guidance on performing risk assessment in the design of onshore LNG
installations including the ship/shore interface (ISO/TS 16901:2022);
German version CEN ISO/TS 16901:2025
DIN
DIN EN 13763-2:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
2: Verification of thermal stability of detonators, surface connectors,
detonating cord relays and shock tubes; German version EN 13763-2:2025
DIN
DIN EN 12309-6:2025-11
En Vigor
2025-11-01
Gas-fired sorption appliances for heating and/or cooling with a net heat
input not exceeding 70 kW - Part 6: Calculation of seasonal
performances; German version EN 12309-6:2025 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN ISO 13079:2025-11
En Vigor
2025-11-01
Laboratory glass and plastics ware - Tubes for the measurement of the
erythrocyte sedimentation rate by the Westergren method (ISO
13079:2011); German version EN ISO 13079:2011
DIN
DIN 50024:2025-07
En Vigor
2025-07-01
Corrosion of metals and alloys - Test method using a color indicator -
Test method for the detection of passive layer formation on stainless steels
DIN
DIN 6868-161:2025-09
En Vigor
2025-09-01
Image quality assurance in diagnostic X-ray departments - Part 161:
Acceptance and constancy testing of dental radiographic equipment for
digital cone-beam computed tomography
DIN
DIN EN ISO 3506-7:2025-08
En Vigor
2025-08-01
Fasteners - Mechanical properties of corrosion-resistant stainless steel
fasteners - Part 7: Flat washers with specified grades and property
classes (ISO 3506-7:2024); German and English version prEN ISO
3506-7:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN ISO 9094:2025-09
En Vigor
2025-09-01
Small craft - Fire protection (ISO/DIS 9094:2025); German and English
version prEN ISO 9094:2025 / Note: Date of issue 2025-08-15*Intended as
replacement for DIN EN ISO 9094 (2023-03).
DIN
DIN EN 16141:2025-07
En Vigor
2025-07-01
Conservation of cultural heritage - Guidelines for management of
environmental conditions - Collection storage facilities: definitions
and characteristics of buildings dedicated to the preservation and
management of cultural heritage; German version EN 16141:2024
DIN
DIN EN ISO 12401:2025-11
En Vigor
2025-11-01
Small craft - Deck safety harness and safety line - Safety requirements
and test methods (ISO/DIS 12401:2025); German and English version prEN
ISO 12401:2025 / Note: Date of issue 2025-10-24*Intended as replacement
for DIN EN ISO 12401 (2010-01).
DIN
DIN EN ISO 3035:2025-11
En Vigor
2025-11-01
Corrugated fibreboard - Determination of flat crush resistance (ISO
3035:2025); German version EN ISO 3035:2025
DIN
DIN EN 13763-6:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
6: Verification of resistance to cracking of leading wires; German
version EN 13763-6:2025
DIN
DIN EN 18103:2025-11
En Vigor
2025-11-01
Inorganic fertilizers - Determination of nutrient polymers nitrogen in
the presence of other nitrogenous forms; German version EN 18103:2025
