Filtrar:
DIN
DIN EN 12572-1:2025-07
En Vigor
2025-07-01
Artificial climbing structures - Part 1: Safety requirements and test
methods for ACS with protection points; German and English version prEN
12572-1:2025 / Note: Date of issue 2025-06-13*Intended as replacement
for DIN EN 12572-1 (2017-05).
DIN
DIN 14095:2025-07
En Vigor
2025-07-01
Ground plans for components for buildings for fire brigade use
DIN
DIN EN 448:2025-07
En Vigor
2025-07-01
District heating pipes - Bonded single pipe systems for directly buried
hot water networks - Factory made fitting assemblies of steel service
pipes, polyurethane thermal insulation and a casing of polyethylene;
German version EN 448:2025
DIN
DIN EN 378-3:2025-07
En Vigor
2025-07-01
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 3: Installation site and personal protection; German
and English version prEN 378-3:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 378-3 (2020-12).
DIN
DIN EN 3687:2025-07
En Vigor
2025-07-01
Aerospace series - Bolt, normal hexagon head, relieved shank, long
thread, in heat resisting steel FE-PA2601 (A286), silver plated -
Classification: 1 100 MPa/650 °C; German version ASD-STAN prEN 3687:2025
/ Note: Date of issue 2025-05-30*Intended as replacement for DIN EN 3687 (2012-07).
DIN
DIN EN 18204:2025-07
En Vigor
2025-07-01
Algae and algae products - Determination of the phycocyanin content in
Arthrospira (Spirulina); German and English version prEN 18204:2025 /
Note: Date of issue 2025-06-20
DIN
DIN EN ISO 25086-1:2025-07
En Vigor
2025-07-01
Textiles - Determination of the snagging resistance of fabrics - Part 1:
Mace test method (ISO/DIS 25086-1:2025); German and English version prEN
ISO 25086-1:2025 / Note: Date of issue 2025-06-13
DIN
DIN EN ISO 10253:2025-07
En Vigor
2025-07-01
Water quality - Marine algal growth inhibition test with Skeletonema sp.
and Phaeodactylum tricornutum (ISO 10253:2024); German version EN ISO 10253:2024
DIN
DIN ISO 6426-2:2025-07
En Vigor
2025-07-01
Horological vocabulary - Part 2: Technical and commercial definitions
(ISO/DIS 6426-2:2025); Text in German and English / Note: Date of issue
2025-05-30*Intended as replacement for DIN 8236-5 (1987-01).
DIN
DIN 14464:2025-07
En Vigor
2025-07-01
Assembly with direct connection for sprinkler systems and extinguishing
systems with open nozzles - Requirements and testing / Note: Date of
issue 2025-05-30*Intended as replacement for DIN 14464 (2012-09).
DIN
DIN EN ISO 15548-1:2025-07
En Vigor
2025-07-01
Non-destructive testing - Equipment for eddy current examination - Part
1: Instrument characteristics and verification (ISO/DIS 15548-1:2025);
German and English version prEN ISO 15548-1:2025 / Note: Date of issue
2025-06-06*Intended as replacement for DIN EN ISO 15548-1 (2014-03).
DIN
DIN EN ISO/IEC 23894:2025-07
En Vigor
2025-07-01
Information technology - Artificial intelligence - Guidance on risk
management (ISO/IEC 23894:2023); German version EN ISO/IEC 23894:2024
DIN
DIN EN 12106:2025-07
En Vigor
2025-07-01
Plastics piping systems - Polyethylene (PE), crosslinked polyethylene
(PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the
resistance to internal pressure after application of squeeze-off; German
version EN 12106:2025
DIN
DIN EN ISO 4064-4:2025-07
En Vigor
2025-07-01
Water meters for cold potable water and hot water - Part 4:
Non-metrological requirements not covered in ISO 4064-1 (ISO
4064-4:2024); German version EN ISO 4064-4:2025 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN 2002-001:2025-07
En Vigor
2025-07-01
Aerospace series - Metallic materials - Test methods - Part 001: Tensile
testing at ambient temperature; German version ASD-STAN prEN
2002-001:2025 / Note: Date of issue 2025-06-20*Intended as replacement
for DIN EN 2002-001 (2006-11), DIN EN 2002-001 Berichtigung 1 (2007-08).
DIN
DIN 77009-2:2025-07
En Vigor
2025-07-01
Personal and household services - Part 2: Service provision
DIN
DIN EN 18199:2025-07
En Vigor
2025-07-01
Leather - Essential requirements for leather traceability; German and
English version prEN 18199:2025 / Note: Date of issue 2025-06-13
DIN
DIN EN 16605:2025-06
En Vigor
2025-06-01
Space - Galileo Timing Receiver - Functional and Performance
Requirements and associated Tests; German version EN 16605:2024
DIN
DIN EN 13496:2025-06
En Vigor
2025-06-01
Thermal insulation products for building applications - Determination of
the mechanical properties of glass fibre meshes as reinforcement for
external thermal insulation composite kits with renders (ETIC kits);
German version EN 13496:2025
DIN
DIN EN 13806-1:2025-06
En Vigor
2025-06-01
Foodstuffs - Determination of trace elements - Part 1: Determination of
total mercury in foodstuffs by atomic absorption spectrometry (AAS) -
cold vapour technique after pressure digestion; German version EN 13806-1:2025
DIN
DIN EN 17860-2:2025-06
En Vigor
2025-06-01
Carrier Cycles - Part 2: Lightweight single track carrier cycles -
Mechanical aspects; German version EN 17860-2:2024
DIN
DIN EN 17867:2025-06
En Vigor
2025-06-01
Petrol fuel for small internal combustion engines - Requirements and
test methods; German version EN 17867:2023+A1:2025
DIN
DIN ISO 965-4:2025-06
En Vigor
2025-06-01
ISO general purpose metric screw threads - Tolerances - Part 4: Limits
of sizes for hot-dip galvanized external threads to mate with internal
threads made to tolerance position H or G after galvanizing (ISO 965-4:2025)
DIN
DIN EN 16732:2025-06
En Vigor
2025-06-01
Slide fasteners (zips) - Specification; German version EN 16732:2025
DIN
DIN 4074-3:2025-06
En Vigor
2025-06-01
Strength grading of wood - Part 3: Devices for supporting visual grading
of sawn timber - Requirements and testing
DIN
DIN EN 12385-5:2025-06
En Vigor
2025-06-01
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; German
version EN 12385-5:2021+A1:2025
DIN
DIN EN ISO 10239:2025-06
En Vigor
2025-06-01
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2025);
German version EN ISO 10239:2025
DIN
DIN EN 12007-5:2025-06
En Vigor
2025-06-01
Gas infrastructure - Pipelines for maximum operating pressure up to and
including 16 bar - Part 5: Service lines - Specific functional
requirements; German version EN 12007-5:2024 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN 17860-7:2025-06
En Vigor
2025-06-01
Carrier cycles - Part 7: Cargo trailers; German version EN 17860-7:2024
DIN
DIN EN 13204:2025-06
En Vigor
2025-06-01
Powered rescue tools for fire and rescue service use - Safety and
performance requirements; German version EN 13204:2025 / Note: DIN
14751-4 (2011-04), DIN 14751-5 (2008-10) and DIN EN 13204 (2016-12)
remain valid alongside this standard until 2025-09-30.
DIN
DIN EN ISO 19952:2025-06
En Vigor
2025-06-01
Footwear - Vocabulary (ISO 19952:2025); German version EN ISO 19952:2025
DIN
DIN EN ISO 23625:2025-06
En Vigor
2025-06-01
Small craft - Lithium-ion batteries (ISO 23625:2025); German version EN
ISO 23625:2025
DIN
DIN 16263:2025-06
En Vigor
2025-06-01
PN 16 cocks with adjusting nut and male connection and test connection
for pressure gauges
DIN
DIN EN 17860-3:2025-06
En Vigor
2025-06-01
Carrier Cycles - Part 3: Lightweight multi track carrier cycles -
Mechanical aspects; German version EN 17860-3:2024
DIN
DIN EN 17860-5:2025-06
En Vigor
2025-06-01
Carrier cycles - Part 5: Electrical aspects; German version EN 17860-5:2024
DIN
DIN EN 16339:2025-06
En Vigor
2025-06-01
Ambient air - Method for the determination of the concentration of
nitrogen dioxide by diffusive sampling; German version EN 16339:2025
DIN
DIN EN 13016-3:2025-06
En Vigor
2025-06-01
Liquid petroleum products - Vapour pressure - Part 3: Determination of
vapour pressure and calculated dry vapour pressure equivalent (DVPE)
(Triple expansion method); German version EN 13016-3:2025
DIN
DIN EN 17860-1:2025-06
En Vigor
2025-06-01
Carrier cycles - Part 1: Terms and definitions; German version EN 17860-1:2024
DIN
DIN EN ISO 6579-4:2025-06
En Vigor
2025-06-01
Microbiology of the food chain - Horizontal method for the detection,
enumeration and serotyping of Salmonella - Part 4: Identification of
monophasic Salmonella Typhimurium (1,4,[5],12:i:-) by polymerase chain
reaction (PCR) (ISO 6579-4:2025); German version EN ISO 6579-4:2025
DIN
DIN 1946-6 Beiblatt 1:2025-06
En Vigor
2025-06-01
Ventilation and air conditioning - Part 6: Ventilation for residential
buildings - General requirements, requirements for design, construction,
commissioning and handover as well as maintenance; Supplement 1: Sample
calculations for selected ventilation systems
DIN
DIN EN ISO 10077-2:2025-06
En Vigor
2025-06-01
Thermal performance of windows, doors and shutters - Calculation of
thermal transmittance - Part 2: Numerical method for frames (ISO
10077-2:2017 + Amd 1:2024); German version EN ISO 10077-2:2017 + A1:2025
DIN
DIN EN ISO 8611-2:2025-06
En Vigor
2025-06-01
Pallets for materials handling - Flat pallets - Part 2: Performance
requirements and selection of tests (ISO 8611-2:2025); German version EN
ISO 8611-2:2025
DIN
DIN EN ISO 8611-1:2025-06
En Vigor
2025-06-01
Pallets for materials handling - Flat pallets - Part 1: Test methods
(ISO 8611-1:2025); German version EN ISO 8611-1:2025
DIN
DIN EN ISO 16834:2025-06
En Vigor
2025-06-01
Welding consumables - Wire electrodes, wires, rods and deposits for gas
shielded arc welding of high strength steels - Classification (ISO
16834:2025); German version EN ISO 16834:2025
DIN
DIN EN 17681-1:2025-06
En Vigor
2025-06-01
Textiles and textile products - Per- and polyfluoroalkyl substances
(PFAS) - Part 1: Analysis of an alkaline extract using liquid
chromatography and tandem mass spectrometry; German version EN 17681-1:2025
DIN
DIN 2001-2:2025-06
En Vigor
2025-06-01
Drinking water supply from small units and non stationary plants - Part
2: Non stationary units - Guidelines for drinking water, planning,
construction, operation and maintenance of units / Note: This standard
is part of the DVGW body of rules.
DIN
DIN EN 13369:2025-06
En Vigor
2025-06-01
Common rules for precast concrete products; German version EN 13369:2023
DIN
DIN 50938:2025-06
En Vigor
2025-06-01
Black oxide coatings on ferrous metal components - Requirements and test methods
DIN
DIN 16262:2025-06
En Vigor
2025-06-01
PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
DIN
DIN ISO 965-5:2025-06
En Vigor
2025-06-01
ISO general purpose metric screw threads - Tolerances - Part 5: Limits
of sizes for internal threads to mate with hot-dip galvanized external
threads with maximum size of tolerance position h before galvanizing
(ISO 965-5:2025)
DIN
DIN EN ISO 16811:2025-06
En Vigor
2025-06-01
Non-destructive testing - Ultrasonic testing - Sensitivity and range
setting (ISO 16811:2025); German version EN ISO 16811:2025
DIN
DIN EN ISO 9466:2025-06
En Vigor
2025-06-01
Railway Applications - Coating of passenger rail vehicle (ISO
9466:2025); German version EN ISO 9466:2025
DIN
DIN ISO 16000-33:2025-06
En Vigor
2025-06-01
Indoor air - Part 33: Determination of phthalates with gas
chromatography/mass spectrometry (GC/MS) (ISO 16000-33:2024)
DIN
DIN EN ISO 17828:2025-06
En Vigor
2025-06-01
Solid biofuels - Determination of bulk density (ISO 17828:2025); German
version EN ISO 17828:2025
DIN
DIN 51517-4:2025-05
En Vigor
2025-05-01
Lubricants - Lubricating oils - Part 4: Lubricating oils C LPX, Minimum requirements
DIN
DIN 4760:2025-05
En Vigor
2025-05-01
Form deviations - Concepts, Classification system
DIN
DIN 53298-1:2025-04
En Vigor
2025-04-01
Floor levelling compounds - Technical specification and installation -
Part 1: Cement and calcium sulphate-based floor levelling compounds
DIN
DIN 2510-2:2025-04
En Vigor
2025-04-01
Bolted connections with waisted shank - Part 2: Metric thread with large
clearance - Nominal dimensions and limits of size
DIN
DIN EN 817:2025-03
En Vigor
2025-03-01
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical
specifications; German version EN 817:2024
DIN
DIN 1249-11:2025-02
En Vigor
2025-02-01
Glass in building - Part 11: Glass edges - Terms and definitions,
characteristics of edge types and finishes
