Filtrar:
DIN
DIN EN ISO 80601-2-74:2022-01
En Vigor
2022-01-01
Medical electrical equipment - Part 2-74: Particular requirements for
basic safety and essential performance of respiratory humidifying
equipment (ISO 80601-2-74:2021); German version EN ISO 80601-2-74:2021 /
Note: To be replaced by DIN EN ISO 80601-2-74 (2025-02).
DIN
DIN EN ISO 13304-2:2023-04
En Vigor
2023-04-01
Radiological protection - Minimum criteria for electron paramagnetic
resonance (EPR) spectroscopy for retrospective dosimetry of ionizing
radiation - Part 2: Ex vivo human tooth enamel dosimetry (ISO
13304-2:2020); German version EN ISO 13304-2:2022
DIN
DIN EN ISO 16186:2021-09
En Vigor
2021-09-01
Footwear - Critical substances potentially present in footwear and
footwear components - Determination of dimethyl fumarat (DMFU) (ISO
16186:2021); German version EN ISO 16186:2021
DIN
DIN EN ISO 17161:2016-10
En Vigor
2016-10-01
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic
composites - Determination of the degree of misalignment in uniaxial
mechanical tests (ISO 17161:2014); German version EN ISO 17161:2016
DIN
DIN EN ISO 3376:2020-08
En Vigor
2020-08-01
Leather - Physical and mechanical tests - Determination of tensile
strength and percentage elongation (ISO 3376:2020); German version EN
ISO 3376:2020
DIN
DIN EN ISO 8130-11:2019-08
En Vigor
2019-08-01
Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019);
German version EN ISO 8130-11:2019
DIN
DIN EN ISO 20417:2022-03
En Vigor
2022-03-01
Medical devices - Information to be supplied by the manufacturer (ISO
20417:2021, Corrected version 2021-12); German version EN ISO 20417:2021
/ Note: To be replaced by DIN EN ISO 20417 (2024-12).
DIN
DIN EN ISO 11298-4:2022-04
En Vigor
2022-04-01
Plastics piping systems for renovation of underground water supply
networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021);
German version EN ISO 11298-4:2021 / Note: This standard is part of the
DVGW body of rules.*To be replaced by DIN EN ISO 11300-2 (2025-03).
DIN
DIN EN ISO 6368:2022-02
En Vigor
2022-02-01
Petroleum, petrochemical and natural gas industries - Dry gas sealing
systems for axial, centrifugal, and rotary screw compressors and
expanders (ISO 6368:2021); English version EN ISO 6368:2021
DIN
DIN CEN ISO/TR 22100-5:2022-11
En Vigor
2022-11-01
Safety of machinery - Relationship with ISO 12100 - Part 5: Implications
of artificial intelligence machine learning (ISO/TR 22100-5:2021);
German version CEN ISO/TR 22100-5:2022
DIN
DIN EN ISO 20418-3:2020-11
En Vigor
2020-11-01
Textiles - Qualitative and quantitative proteomic analysis of some
animal hair fibres - Part 3: Peptide detection using LC-MS without
protein reduction (ISO 20418-3:2020); German version EN ISO 20418-3:2020
DIN
DIN EN ISO 15618-1:2016-12
En Vigor
2016-12-01
Qualification testing of welders for underwater welding - Part 1:
Hyperbaric wet welding (ISO 15618-1:2016); German version EN ISO 15618-1:2016
DIN
DIN EN ISO 18295-1:2017-10
En Vigor
2017-10-01
Customer contact centres - Part 1: Requirements for customer contact
centres (ISO 18295-1:2017); German version EN ISO 18295-1:2017
DIN
DIN EN ISO 787-19:2020-07
En Vigor
2020-07-01
General methods of test for pigments - Part 19: Determination of
water-soluble nitrates (Salicylic acid method) (ISO 787-19:2020); German
version EN ISO 787-19:2020
DIN
DIN EN ISO 4589-3:2017-08
En Vigor
2017-08-01
Plastics - Determination of burning behaviour by oxygen index - Part 3:
Elevated-temperature test (ISO 4589-3:2017); German version EN ISO 4589-3:2017
DIN
DIN EN ISO 15848-1:2017-07
En Vigor
2017-07-01
Industrial valves - Measurement, test and qualification procedures for
fugitive emissions - Part 1: Classification system and qualification
procedures for type testing of valves (ISO 15848-1:2015 + Amd.1:2017);
German version EN ISO 15848-1:2015 + A1:2017
DIN
DIN EN ISO 4254-8:2018-09
En Vigor
2018-09-01
Agricultural machinery - Safety - Part 8: Solid fertilizer distributors
(ISO 4254-8:2018); German version EN ISO 4254-8:2018
DIN
DIN EN ISO 6416:2019-03
En Vigor
2019-03-01
Hydrometry - Measurement of discharge by the ultrasonic transit time
(time of flight) method (ISO 6416:2017); German version EN ISO 6416:2017
DIN
DIN EN ISO 283:2023-07
En Vigor
2023-07-01
Textile conveyor belts - Full thickness tensile strength, elongation at
break and elongation at the reference load - Test method (ISO 283:2023);
German version EN ISO 283:2023
DIN
DIN EN ISO 9455-6:2023-10
En Vigor
2023-10-01
Soft soldering fluxes - Test methods - Part 6: Determination and
detection of halide (excluding fluoride) content (ISO 9455-6:2022);
German version EN ISO 9455-6:2022
DIN
DIN EN ISO 19650-2:2019-08
En Vigor
2019-08-01
Organization and digitization of information about buildings and civil
engineering works, including building information modelling (BIM) -
Information management using building information modelling - Part 2:
Delivery phase of the assets (ISO 19650-2:2018); German version EN ISO
19650-2:2018 / Note: To be replaced by DIN EN ISO 19650-2 (2026-04).
DIN
DIN EN ISO 17225-1:2021-10
En Vigor
2021-10-01
Solid biofuels - Fuel specifications and classes - Part 1: General
requirements (ISO 17225-1:2021); German version EN ISO 17225-1:2021
DIN
DIN EN ISO 8130-1:2019-08
En Vigor
2019-08-01
Coating powders - Part 1: Determination of particle size distribution by
sieving (ISO 8130-1:2019); German version EN ISO 8130-1:2019
DIN
DIN IEC/TR 62222:2024-04
En Vigor
2024-04-01
Fire performance of communication cables installed in buildings (IEC TR 62222:2021)
DIN
DIN EN ISO 25353:2025-10
En Vigor
2025-10-01
Textiles - Qualitative analysis proteomic analysis of protein fibres
from leather - Peptide detection using MALDI-TOF MS (ISO/DIS
25353:2025); German and English version prEN ISO 25353:2025 / Note: Date
of issue 2025-08-29
DIN
DIN EN ISO 22569:2020-11
En Vigor
2020-11-01
Dentistry - Multifunction handpieces (ISO 22569:2020); German version EN
ISO 22569:2020
DIN
DIN EN ISO 17201-3:2019-06
En Vigor
2019-06-01
Acoustics - Noise from shooting ranges - Part 3: Sound propagation
calculations (ISO 17201-3:2019); German version EN ISO 17201-3:2019
DIN
DIN EN ISO 18403:2016-12
En Vigor
2016-12-01
Footwear - Test methods for slide fasteners - Resistance to damage
during closure under a lateral force (ISO 18403:2016); German version EN
ISO 18403:2016
DIN
DIN EN ISO 8437-4:2023-11
En Vigor
2023-11-01
Snow throwers - Safety requirements and test procedures - Part 4:
Additional national and regional requirements (ISO 8437-4:2019); German
version EN ISO 8437-4:2021 / Note: To be amended by DIN EN ISO 8437-4/A1 (2023-12).
DIN
DIN IEC 61079-4:1994-09
En Vigor
1994-09-01
Methods of measurement on receivers for satellite broadcast
transmissions in the 12 GHz band - Part 4: Electrical measurements on
sound/data decoder units for the digital subcarrier NTSC system;
identical with IEC 61079-4:1993
DIN
DIN ETS 300374-1:1995-04
En Vigor
1995-04-01
Intelligent Network (IN) - Intelligent Network Capability Set 1 (CS1),
Core Intelligent Network Application Protocol (INAP) - Part 1: Protocol
specification; English Version ETS 300374-1:1994
DIN
DIN EN ISO 13132:2023-08
En Vigor
2023-08-01
Laboratory glassware - Petri dishes (ISO 13132:2023); German version EN
ISO 13132:2023
DIN
DIN EN ISO 6186:2023-10
En Vigor
2023-10-01
Plastics - Determination of pourability (ISO 6186:2023); German version
EN ISO 6186:2023
DIN
DIN EN ISO 11608-3:2024-01
En Vigor
2024-01-01
Needle-based injection systems for medical use - Requirements and test
methods - Part 3: Containers and integrated fluid paths (ISO
11608-3:2022, Corrected version 2023-01); German version EN ISO
11608-3:2022 / Note: To be amended by DIN EN ISO 11608-3/A1 (2025-11).
DIN
DIN EN ISO 15195:2019-07
En Vigor
2019-07-01
Laboratory medicine - Requirements for the competence of calibration
laboratories using reference measurement procedures (ISO 15195:2018);
German version EN ISO 15195:2019
DIN
DIN ETS 300349:1995-11
En Vigor
1995-11-01
Broadband Integrated Services Digital Network (B-ISDN) - Asynchronous
Transfer Mode (ATM) Adaptation Layer (AAL) specification; type 3/4;
English version ETS 300349:1995
DIN
DIN EN ISO 23325:2020-12
En Vigor
2020-12-01
Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020);
German version EN ISO 23325:2020
DIN
DIN EN ISO 14253-1:2018-07
En Vigor
2018-07-01
Geometrical product specifications (GPS) - Inspection by measurement of
workpieces and measuring equipment - Part 1: Decision rules for
verifying conformity or nonconformity with specifications (ISO
14253-1:2017); German version EN ISO 14253-1:2017
DIN
DIN EN ISO 11357-1:2023-06
En Vigor
2023-06-01
Plastics - Differential scanning calorimetry (DSC) - Part 1: General
principles (ISO 11357-1:2023); German version EN ISO 11357-1:2023
DIN
DIN ETS 300806-2:1998-12
En Vigor
1998-12-01
Private Integrated Services Network (PISN) - Inter-exchange signalling
protocol, Generic functional protocol for the support of supplementary
services - Part 2: Abstract Test Suite (ATS) specification; English
version ETS 300806-2:1998
DIN
DIN ETS 300780:1998-08
En Vigor
1998-08-01
Broadband Integrated Services Digital Network (B-ISDN) - Broadband
Connection-Oriented Bearer Service (BCOBS) [ITU-T Recommendation F.811
(1996)]; English version ETS 300780:1997
DIN
DIN EN 15733:2011-07
En Vigor
2011-07-01
Services of real estate agents - Requirements for the provision of
services of real estate agents; German version EN 15733:2009
DIN
DIN 53019-4:2016-10
En Vigor
2016-10-01
Rheometry - Measurement of rheological properties using rotational
rheometers - Part 4: Oscillatory rheology
DIN
DIN 6063-2:2011-04
En Vigor
2011-04-01
Threads, mainly for plastic containers - Part 2: Trapezoidal screw
threads, dimensions
DIN
DIN 66341:1993-12
En Vigor
1993-12-01
Information technology; computer graphics; reference model; identical
with ISO/IEC 11072:1992
DIN
DIN EN ISO 13760:2026-02
En Vigor
2026-02-01
Plastics pipes for the conveyance of fluids under pressure - Miner's
rule - Calculation method for cumulative damage (ISO/DIS 13760:2026);
German and English version prEN ISO 13760:2026 / Note: Date of issue
2026-01-09*Intended as replacement for DIN EN ISO 13760 (1998-07).
DIN
DIN ETS 300578:2000-12
En Vigor
2000-12-01
Digital cellular telecommunications system (Phase 2) - Radio subsystem
link control (Endorsement of the English version ETS 300578:1999 as
German standard) / Note: Endorsement notice
DIN
DIN ETS 300795:2000-02
En Vigor
2000-02-01
V interfaces at the digital Local Exchange (LE) - Access Network (AN)
supporting V5 - Transmission characteristics and performance design
objectives for call handling and bearer channel connection management
(Endorsement of the English version ETS 300795:1998 as German Standard)
/ Note: Endorsement notice
DIN
DIN 28602:2000-05
En Vigor
2000-05-01
Ductile iron pipes and fittings - Bolted gland joints - Assembly,
sockets, counter ring, sealing ring, bolts and nuts
DIN
DIN 4000-144:2011-09
En Vigor
2011-09-01
Tabular layouts of properties - Part 144: Master gears and truing gears
for involute teeth
DIN
DIN 2137-2:2018-12
En Vigor
2018-12-01
Keyboards for data and text input - Part 2: Additional requirements;
Text in German and English
DIN
DIN 25475-3:2015-04
En Vigor
2015-04-01
Nuclear facilities - Operational monitoring - Part 3: Determination of
thermal loadings
DIN
DIN
DIN 19294-2:2026-04
En Vigor
2026-04-01
Devices for the disinfection of water using ultraviolet radiation - Part
2: Devices equipped with UV medium pressure lamps - Requirements and
testing / Note: This standard is part of the DVGW body of rules.
DIN
DIN 6113-2:2010-08
En Vigor
2010-08-01
Packaging - Radio-frequency identification of rigid industrial
packaging, positioning and system parameters for passive RFID chips -
Part 2: Non-removable head (tight head) steel drum and removable head
(open head) steel drum with plug/bung closure system of total capacity
exceeding 200 l
DIN
DIN 51060:2000-06
En Vigor
2000-06-01
Refractory ceramic raw materials and refractories - Definitions of the
terms refractory, high refractory
DIN
DIN 6386-1:2014-03
En Vigor
2014-03-01
Lathe chucks - Part 1: Technical conditions of delivery for hand
operated lathe chucks
DIN
DIN 16560-16:2003-08
En Vigor
2003-08-01
EDIFACT - Implementation guide - Part 16: Use of the service message
type KEYMAN for conveying security keys and certificates
DIN
DIN 55543-3:2010-06
En Vigor
2010-06-01
Packaging test - Test methods for packaging films - Part 3:
Determination of the strength of longitudinal seams of sacks and bags
DIN
