Filtrar:
DIN
DIN EN 13630-1:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 1:
Requirements; German version EN 13630-1:2025
DIN
DIN EN ISO 17829:2024-10
En Vigor
2025-12-01
Solid Biofuels - Determination of length and diameter of pellets
(ISO/DIS 17829:2024); German and English version prEN ISO 17829:2024 /
Note: Date of issue 2024-09-06
DIN
DIN 12784:2025-08
En Vigor
2025-08-01
Laboratory glassware - Thermometers with interchangeable ground joint
DIN
DIN 51603-1:2024-11
En Vigor
2024-11-01
Liquid fuels - Fuel oils - Part 1: Fuel oils EL, minimum requirements
DIN
DIN EN 891:2025-08
En Vigor
2025-08-01
Chemicals used for treatment of water intended for human consumption -
Iron (III) chloride sulfate; German and English version prEN 891:2025 /
Note: Date of issue 2025-07-04*Intended as replacement for DIN EN 891 (2023-05).
DIN
DIN EN 17639:2025-07
En Vigor
2025-07-01
Safety of machinery - Cableway installations designed for the transport
of material and specially designated persons - General safety
requirements; German version EN 17639:2025
DIN
DIN 4051-100:2025-11
En Vigor
2025-11-01
Sewer clinker - Part 100: Proof of conformity for sewer clinker
according to DIN 4051-1
DIN
DIN EN 13763-9:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
9: Determination of resistance to bending of detonators; German and
English version prEN 13763-9:2021 / Note: Date of issue 2021-04-30
DIN
DIN EN IEC 61755-3-7:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces - Part 3-7: Connector parameters of non-dispersion
shifted single mode physically contacting fibres - non-angled 2,5 mm and
1,25 mm diameter cylindrical composite ferrules using titanium as fibre
surrounding material (IEC 86B/5069/CDV:2025); German and English version
prEN IEC 61755-3-7:2025 / Note: Date of issue 2025-11-28*Intended as
replacement for DIN EN 61755-3-7 (2009-09).
DIN
DIN 32705:2025-08
En Vigor
2025-08-01
Classification Systems - Establishment and development of classification systems
DIN
DIN
DIN EN ISO 8502-5:2025-09
En Vigor
2025-09-01
Preparation of steel substrates before application of paints and related
products - Tests for the assessment of surface cleanliness - Part 5:
Measurement of chloride on steel surfaces prepared for painting (ion
detection tube method) (ISO 8502-5:2025); German version EN ISO 8502-5:2025
DIN
DIN EN ISO 10325:2025-09
En Vigor
2025-09-01
Fibre ropes - High modulus polyethylene - 8-strand braided ropes,
12-strand braided ropes and covered ropes (ISO/DIS 10325:2025); German
and English version prEN ISO 10325:2025 / Note: Date of issue
2025-07-25*Intended as replacement for DIN EN ISO 10325 (2019-01).
DIN
DIN 2827:2025-11
En Vigor
2025-11-01
Hose assemblies of stainless steel for chemical products / Note: Date of
issue 2025-10-10*Intended as replacement for DIN 2827 (2006-07).
DIN
DIN
DIN EN ISO/IEEE 11073-10701:2024-07
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10701: Point-of-Care
Medical Device Communication - Metric Provisioning by Participants in a
Service-Oriented Device Connectivity (SDC) System (ISO/IEEE FDIS
11073-10701:2024); English version prEN ISO IEEE 11073-10701:2024 /
Note: Date of issue 2024-05-31
DIN
DIN EN ISO 3170 Berichtigung 1:2007-12
En Vigor
2025-12-01
Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN
ISO 3170:2004, Corrigenda to DIN EN ISO 3170:2004-06
DIN
DIN
DIN ISO 8588:2025-07
En Vigor
2025-07-01
Sensory analysis - Methodology - "A"-"not A" test
(ISO 8588:2017)
DIN
DIN EN 16510-2-7:2025-10
En Vigor
2025-10-01
Residential solid fuel burning appliances - Part 2-7: Combination
appliances fired by wood logs and pellets; German version EN 16510-2-7:2025
DIN
DIN 45667-1:2025-12
En Vigor
2025-12-01
Classification methods for the evaluation of irregular oscillations -
Part 1: Fundamentals of the classification of irregular oscillations -
Reversal point sequence
DIN
DIN EN 15383:2025-02
En Vigor
2025-12-01
Plastics piping systems for drainage and sewerage - Glass-reinforced
thermosetting plastics (GRP) based on polyester resin (UP) - Manholes
and inspection chambers; German and English version prEN 15383:2025 /
Note: Date of issue 2025-01-10
DIN
DIN EN ISO 4491-3:2006-06
En Vigor
2025-12-01
Metallic powders - Determination of oxygen content by reduction methods
- Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997); German version EN
ISO 4491-3:2006
DIN
DIN 55524-2:2025-07
En Vigor
2025-07-01
Packaging - Attributes - Part 2: Attributes for packaging made of solid
fibreboard / Note: Date of issue 2025-05-30*Intended as replacement for
DIN 55524-2 (2016-08).
DIN
DIN EN 16072:2025-07
En Vigor
2025-07-01
Intelligent transport systems - eSafety - Pan-European eCall operating
requirements; German version EN 16072:2025
DIN
DIN 1833:2025-12
En Vigor
2025-12-01
Inverse dovetail cutters and dovetail cutters with parallel shank -
Dimensions and technical delivery conditions / Note: Date of issue
2025-11-21*Intended as replacement for DIN 1833-1 (1989-04), DIN 1833-2 (1990-04).
DIN
DIN EN 71-7:2024-12
En Vigor
2025-12-01
Safety of toys - Part 7: Finger paints - Requirements and test methods;
German and English version prEN 71-7:2024 / Note: Date of issue 2024-11-22
DIN
DIN EN ISO 4064-5:2017-10
En Vigor
2025-12-01
Water meters for cold potable water and hot water - Part 5: Installation
requirements (ISO 4064-5:2014); German version EN ISO 4064-5:2017 /
Note: This standard is part of the DVGW body of rules.
DIN
DIN EN ISO 21805/A1:2025-07
En Vigor
2025-07-01
Guidance and recommendations on design, selection and installation of
vents to safeguard the structural integrity of enclosures protected by
gaseous fire-extinguishing systems - Amendment 1 (ISO 21805:2023/DAM
1:2025); German and English version EN ISO 21805:2023/prA1:2025 / Note:
Date of issue 2025-06-13*Intended as an amendment to DIN EN ISO 21805 (2023-07).
DIN
DIN EN ISO 16276-1:2025-09
En Vigor
2025-09-01
Corrosion protection of steel structures by protective paint systems -
Assessment of, and acceptance criteria for, the adhesion/cohesion
(fracture strength) of a coating - Part 1: Pull-off testing (ISO
16276-1:2025); German version EN ISO 16276-1:2025
DIN
DIN EN 16839:2025-12
En Vigor
2025-12-01
Railway applications - Rolling stock - Head stock layout; German version
EN 16839:2022+A1:2025
DIN
DIN EN 14625:2022-11
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of ozone by ultraviolet photometry; German and English version prEN
14625:2022 / Note: Date of issue 2022-09-30
DIN
DIN EN ISO 19085-9:2022-08
En Vigor
2025-12-01
Woodworking machines - Safety - Part 9: Circular saw benches (with and
without sliding table) (ISO/DIS 19085-9:2022); German and English
version prEN ISO 19085-9:2022 / Note: Date of issue 2022-06-24
DIN
DIN 4000-89:2025-07
En Vigor
2025-07-01
Tabular layouts of properties - Part 89: Adaptive items for tools and
extenders / Note: Date of issue 2025-06-20*Intended as replacement for
DIN 4000-89 (2012-03).
DIN
DIN EN 2283:2025-08
En Vigor
2025-08-01
Aerospace series - Testing of aircraft wiring; German and English
version prEN 2283:2025 / Note: Date of issue 2025-07-11*Intended as
replacement for DIN EN 2283 (2011-02).
DIN
DIN EN ISO 15883-2:2025-07
En Vigor
2025-07-01
Washer-disinfectors - Part 2: Requirements and tests for
washer-disinfectors employing thermal disinfection for critical and
semi-critical medical devices (ISO 15883-2:2024); German version EN ISO
15883-2:2025 / Note: Applies in conjunction with DIN EN ISO 15883-1 (2025-07).
DIN
DIN EN 3636:2025-09
En Vigor
2025-09-01
Aerospace series - Screws, reduced pan head, offset cruciform recess,
relieved shank, long thread, in heat resisting steel FEPA92HT (A286),
silver plated - Classification: 900 MPa/650 °C; German and English
version prEN 3636:2025 / Note: Date of issue 2025-07-25*Intended as
replacement for DIN EN 3636 (2008-12).
DIN
DIN EN ISO 8741:2025-09
En Vigor
2025-09-01
Fasteners - Reverse-taper grooved pins - Half-length progressive grooves
(ISO 8741:2025); German version EN ISO 8741:2025
DIN
DIN
DIN EN ISO 11616:2025-11
En Vigor
2025-11-01
Health informatics - Identification of medicinal products - Data
elements and structures for unique identification and exchange of
regulated pharmaceutical product information (ISO/DIS 11616:2025);
German and English version prEN ISO 11616:2025 / Note: Date of issue
2025-10-24*Intended as replacement for DIN EN ISO 11616 (2018-04).
DIN
DIN EN 12543-2:2021-06
En Vigor
2025-12-01
Non-destructive testing - Characteristics of focal spots in industrial
X-ray systems for use in non-destructive testing - Part 2: Pinhole
camera radiographic method; German version EN 12543-2:2021
DIN
DIN EN ISO 18984:2025-12
En Vigor
2025-12-01
Ball valves for thermoplastics piping systems for hot and cold water
installations under pressure - Types, dimensions and requirements (ISO
18984:2025); German version EN ISO 18984:2025 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN CEN ISO/TS 24315-3:2025-12
En Vigor
2025-12-01
Intelligent transport systems - Management of electronic traffic
regulations (METR) - Part 3: System of systems requirements and
architecture (SoSR) (ISO/TS 24315-3:2025); English version CEN ISO/TS 24315-3:2025
DIN
DIN
DIN EN ISO 11781:2025-07
En Vigor
2025-07-01
Molecular biomarker analysis - Requirements and guidance for
single-laboratory validation of qualitative real-time polymerase chain
reaction (PCR) methods (ISO 11781:2025); German version EN ISO 11781:2025
DIN
DIN EN ISO 11133:2025-08
En Vigor
2025-08-01
Microbiology of the food chain, animal feed and water - Preparation,
production, storage and performance testing of culture media and
reagents (ISO/DIS 11133:2025); German and English version prEN ISO
11133:2025 / Note: Date of issue 2025-07-04*Intended as replacement for
DIN EN ISO 11133 (2020-10).
DIN
DIN EN ISO 10512:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with
non-metallic insert), with fine pitch thread (ISO 10512:2025); German
version EN ISO 10512:2025
DIN
DIN 30360:2025-11
En Vigor
2025-11-01
Corrosion protection - Overview of Characteristics and Test Methods for
Factory and Field Coatings / Note: Date of issue 2025-10-10
DIN
DIN EN ISO 11608-3/A1:2025-11
En Vigor
2025-11-01
Needle-based injection systems for medical use - Requirements and test
methods - Part 3: Containers and integrated fluid paths - Amendment 1
(ISO 11608-3:2022/DAM 1:2025); German and English version EN ISO
11608-3:2022/prA1:2025 / Note: Date of issue 2025-10-03*Intended as an
amendment to DIN EN ISO 11608-3 (2024-01).
DIN
DIN EN 13207:2018-05
En Vigor
2025-12-01
Plastics - Thermoplastic silage films and tubes for use in agriculture;
German version EN 13207:2018
DIN
DIN EN ISO 5459:2013-05
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Geometrical tolerancing -
Datums and datum systems (ISO 5459:2011); German version EN ISO 5459:2011
DIN
DIN ISO 23223:2021-11
En Vigor
2025-12-01
Alpine ski boots with improved walking soles - Interface with alpine
ski-bindings - Requirements and test methods (ISO 23223:2021)
DIN
DIN 76-1:2025-07
En Vigor
2025-07-01
Fasteners - Thread run-outs and thread undercuts - Part 1: For ISO
metric threads in accordance with DIN 13-1
DIN
DIN EN IEC 60352-7:2025-09
En Vigor
2025-09-01
Solderless connections - Part 7: Spring clamp connections - General
requirements, test methods and practical guidance (IEC
48B/3108/CDV:2024); German and English version prEN IEC 60352-7:2024 /
Note: Date of issue 2025-08-01*Intended as replacement for DIN EN IEC
60352-7 (2023-12).
DIN
DIN EN ISO 14096-1:2025-09
En Vigor
2025-09-01
Non-destructive testing - Qualification of radiographic film
digitisation systems - Part 1: Definitions, quantitative measurements of
image quality parameters, standard reference film and qualitative
control (ISO/DIS 14096-1:2025); German and English version prEN ISO
14096-1:2025 / Note: Date of issue 2025-08-15*Intended as replacement
for DIN EN ISO 14096-1 (2020-10).
DIN
DIN EN 13763-19:2004-03
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 19:
Determination of firing impulse of electric detonators; German version
EN 13763-19:2003
DIN
DIN EN ISO 9556:2002-04
En Vigor
2025-12-01
Steel and iron - Determination of total carbon content - Infrared
absorption method after combustion in an induction furnace (ISO
9556:1989); German version EN ISO 9556:2001
DIN
DIN EN ISO 4935:2025-12
En Vigor
2025-12-01
Steel and iron - Determination of sulfur content - Infrared absorption
method after combustion in an induction furnace (ISO/DIS 4935:2025);
German and English version prEN ISO 4935:2025 / Note: Date of issue
2025-11-14*Intended as replacement for DIN EN 24935 (1992-07).
DIN
DIN EN 2267-002:2025-11
En Vigor
2025-11-01
Aerospace series - Cables, electrical, for general purpose - Operating
temperatures between -55 °C and 260 °C - Part 002: General; German and
English version EN 2267-002:2025
DIN
DIN EN 14624:2025-11
En Vigor
2025-11-01
Performance of portable locating leak detectors and of fixed gas
detectors for all refrigerants; German and English version prEN
14624:2025 / Note: Date of issue 2025-10-10*Intended as replacement for
DIN EN 14624 (2020-08).
