Filtrar:
DIN
DIN EN IEC 62343-1:2025-07
En Vigor
2025-07-01
Dynamic modules - Part 1: Performance standards - General conditions
(IEC 62343-1:2019 + AMD1:2023); German version EN IEC 62343-1:2019 +
A1:2024 / Note: DIN EN IEC 62343-1 (2020-02) remains valid alongside
this standard until 2027-01-18.
DIN
DIN EN 3475-805:2025-07
En Vigor
2025-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 805: Characteristic impedance; German and English version prEN
3475-805:2025 / Note: Date of issue 2025-06-13*Intended as replacement
for DIN EN 3475-805 (2002-12).
DIN
DIN EN 15698-2:2025-07
En Vigor
2025-07-01
District heating pipes - Bonded twin pipe systems for directly buried
hot water networks - Part 2: Factory made fitting and valve assemblies
of steel service pipes, polyurethane thermal insulation and one casing
of polyethylene; German version EN 15698-2:2025
DIN
DIN EN 14363-1:2025-07
En Vigor
2025-07-01
Railway applications - Testing and simulation for the assessment of
running characteristics of rail vehicles operated on the heavy rail
network - Part 1: General; German and English version prEN 14363-1:2025
/ Note: Date of issue 2025-05-30*Intended as replacement for DIN EN
14363 (2022-10).
DIN
DIN EN 6050:2025-07
En Vigor
2025-07-01
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk
reduced head, shear type, in aluminium alloy 7050, conversion coating -
Inch series; German version ASD-STAN prEN 6050:2025 / Note: Date of
issue 2025-05-30
DIN
DIN EN 15767-2:2025-07
En Vigor
2025-07-01
Portable equipment for projecting extinguishing agents and firefighting
support operations - Portable monitors - Part 2: Water nozzles; German
and English version prEN 15767-2:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 15767-2 (2009-09).
DIN
DIN EN 15522-2:2025-07
En Vigor
2025-07-01
Oil spill identification - Petroleum and petroleum related products -
Part 2: Analytical method and interpretation of results based on GC-FID
and GC-low resolution-MS analyses; German version EN 15522-2:2023+A1:2025
DIN
DIN EN 508-2:2025-07
En Vigor
2025-07-01
Roofing and cladding products from metal sheet - Specification for
self-supporting products of steel, aluminium or stainless steel sheet -
Part 2: Aluminium; German and English version prEN 508-2:2025 / Note:
Date of issue 2025-06-20*Intended as replacement for DIN EN 508-2 (2019-10).
