Filtrar:
IEC
IEC TR 61292-9:2023 RLV
En Vigor
2023-01-11
Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
IEC
IEC 60050-131:2002/AMD2:2013
En Vigor
2013-08-21
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part
131: Circuit theory
IEC
IEC 62005-4:1999
En Vigor
1999-08-06
Reliability of fibre optic interconnecting devices and passive optical
components - Part 4: Product screening
IEC
IEC 61043:1993
En Vigor
1993-11-30
Electroacoustics - Instruments for the measurement of sound intensity -
Measurements with pairs of pressure sensing microphones
IEC
IEC TR 62899-402-4:2021
En Vigor
2021-09-21
Printed electronics - Part 402-4: Printability - Measurement of
qualities - Classification and measurement methods for morphology
IEC
IEC 61079-4:1993
En Vigor
1993-06-25
Methods of measurement on receivers for satellite broadcast
transmissions in the 12 GHz band - Part 4: Electrical measurements on
sound/data decoder units for the digital subcarrier NTSC system
ISO
ISO/IEC 29341-8-1:2008
En Vigor
2008-11-28
Information technology — UPnP Device Architecture — Part 8-1: Internet
Gateway Device Control Protocol - Internet Gateway Device
IEC
IEC 62489-1:2010+AMD1:2014+AMD2:2017 CSV
En Vigor
2017-11-27
Electroacoustics - Audio-frequency induction loop systems for assisted
hearing - Part 1: Methods of measuring and specifying the performance of
system components
IEC
IEC 61260-1:2014
En Vigor
2014-02-14
Electroacoustics - Octave-band and fractional-octave-band filters - Part
1: Specifications
ISO
ISO/IEC 14543-5-4:2010
En Vigor
2010-11-15
Information technology — Home electronic system (HES) architecture —
Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and
Class 3 — Device validation
ISO
ISO/IEC 23360-1-3:2021
En Vigor
2021-10-08
Linux Standard Base (LSB) — Part 1-3: Desktop specification generic part
IEC
IEC 60332-3-10:2018
En Vigor
2018-07-13
Tests on electric and optical fibre cables under fire conditions - Part
3-10: Test for vertical flame spread of vertically-mounted bunched wires
or cables - Apparatus
IEC
IEC TS 63126:2025 RLV
En Vigor
2025-10-14
Guidelines for qualifying PV modules, components and materials for
operation at high temperatures
IEC
CISPR 16-1-4:2025 RLV
En Vigor
2025-10-03
Specification for radio disturbance and immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and immunity measuring apparatus -
Antennas and test sites for radiated disturbance measurements
IEC
CISPR 11:2024
En Vigor
2024-02-13
Industrial, scientific and medical equipment - Radio-frequency
disturbance characteristics - Limits and methods of measurement
IEC
ISO/IEC 14496-4:2004/AMD6:2005/COR1:2007
En Vigor
2007-09-24
Information technology - Coding of audio-visual objects - Part 4:
Conformance testing - Amendment 6: Advanced Video Coding conformance -
Technical Corrigendum 1
IEC
IEC 60745-2-6:2003
En Vigor
2003-01-27
Hand-held motor-operated electric tools - Safety - Part 2-6: Particular
requirements for hammers
IEC
IEC 60051-6:2017
En Vigor
2017-12-15
Direct acting indicating analogue electrical measuring instruments and
their accessories - Part 6: Special requirements for ohmmeters
(impedance meters) and conductance meters
IEC
IEC 60335-2-107:2017/AMD1:2020
En Vigor
2020-02-20
Amendment 1 - Household and similar electrical appliances - Safety -
Part 2-107: Particular requirements for robotic battery powered
electrical lawnmowers
ISO
ISO/IEC 10021-10:1999
En Vigor
1999-12-15
Information technology — Message Handling Systems (MHS): MHS routing —
Part 10:
IEC
IEC 62243:2012
En Vigor
2012-06-21
Artificial Intelligence Exchange and Service Tie to All Test
Environments (AI-ESTATE)
IEC
IEC 60564:1977/AMD1:1981
En Vigor
1981-09-01
Amendment 1 - D.C. bridges for measuring resistance
IEC
IEC 60317-8:2010/AMD1:2024
En Vigor
2024-06-18
Amendment 1 - Specifications for particular types of winding wires -
Part 8: Polyesterimide enamelled round copper wire, class 180
IEC
IEC 60512-15-4:2008
En Vigor
2008-05-09
Connectors for electronic equipment - Tests and measurements - Part
15-4: Connector tests (mechanical) - Test 15d: Contact insertion,
release and extraction force
IEC
IEC 63522-9:2025
En Vigor
2025-04-17
Electrical relays - Tests and measurements - Part 9: Climatic tests
IEC
IEC 61056-2:2012
En Vigor
2012-02-22
General purpose lead-acid batteries (valve-regulated types) - Part 2:
Dimensions, terminals and marking
IEC
IEC 60317-37:2013+AMD1:2024 CSV
En Vigor
2024-06-14
Specifications for particular types of winding wires - Part 37:
Polyesterimide enamelled round copper wire, class 180, with a bonding layer
IEC
IEC 60107-7:1997
En Vigor
1997-02-14
Methods of measurement on receivers for television - Part 7: HDTV displays
IEC
IEC 63522-7:2025
En Vigor
2025-04-15
Electrical relays - Tests and measurements - Part 7: Functional tests
IEC
CISPR 14-1:2020
En Vigor
2020-09-07
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission
IEC
IEC 63355:2022
En Vigor
2022-07-13
Cable management systems - Test method for content of halogens
IEC
IEC 62631-2-1:2018
En Vigor
2018-02-27
Dielectric and resistive properties of solid insulating materials - Part
2-1: Relative permittivity and dissipation factor - Technical
Frequencies (0,1 Hz - 10 MHz) - AC Methods
IEC
IEC TS 62282-9-102:2021
En Vigor
2021-01-14
Fuel cell technologies - Part 9-102: Evaluation methodology for the
environmental performance of fuel cell power systems based on life cycle
thinking - Product category rules for environmental product declarations
of stationary fuel cell power systems and alternative systems for
residential applications
IEC
IEC 60763-1:2010
En Vigor
2010-08-06
Laminated pressboard for electrical purposes - Part 1: Definitions,
classification and general requirements
IEC
IEC 62384:2020
En Vigor
2020-05-13
DC or AC supplied electronic controlgear for LED modules - Performance requirements
IEC
IEC 60061-1:2005 CSV
En Vigor
2005-01-27
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1: Lamp caps
IEC
IEC 62561-2:2025
En Vigor
2025-09-30
Lightning protection system components (LPSC) - Part 2: Requirements for
conductors and earth electrodes
IEC
IEC 60811-511:2012/AMD1:2017
En Vigor
2017-07-21
Amendment 1 - Electric and optical fibre cables - Test methods for
non-metallic materials - Part 511: Mechanical tests - Measurement of the
melt flow index of polyethylene and polypropylene compounds
IEC
IEC 60061-4B:1994
En Vigor
1994-01-01
Second supplement - Lamp caps and holders together with gauges for the
control of interchangeability and safety. Part 4: Guidelines and general information
IEC
IEC 60404-8-10:2009
En Vigor
2009-05-19
Magnetic materials - Part 8-10: Specifications for individual materials
- Magnetic materials (iron and steel) for use in relays
IEC
IEC 60061-1:1969/AMD57:2017
En Vigor
2017-12-15
Amendment 57 - Lamp caps and holders together with gauges for the
control of interchangeability and safety - Part 1: Lamps Caps
IEC
IEC 62841-2-4:2014+AMD1:2025 CSV
En Vigor
2025-02-27
Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery - Safety - Part 2-4: Particular requirements for
hand-held sanders and polishers other than disc type
IEC
IEC Technology and Market Outlook Paper Artificial intelligence generated content:2025
En Vigor
2025-09-10
Artificial intelligence generated content (AIGC): Industry insights and
exploring the future
IEC
IEC 61834-10:2001/COR1:2001
En Vigor
2001-07-10
Corrigendum 1 - Recording - Helical-scan digital video cassette
recording system using 6,35 mm magnetic tape for consumer use (525-60,
625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format
IEC
IEC 62271-103:2021/COR1:2025
En Vigor
2025-07-16
Corrigendum 1 - High-voltage switchgear and controlgear - Part 103:
Alternating current switches for rated voltages above 1 kV up to and
including 52 kV
IEC
IEC 60335-2-3:2022 CMV
En Vigor
2022-10-12
Household and similar electrical appliances - Safety - Part 2-3:
Particular requirements for electric irons
IEC
IEC 60050-722:1992/AMD1:2017
En Vigor
2017-08-30
Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part
722: Telephony
IEC
IEC
IEC 60191-5:1997
En Vigor
1997-04-23
Mechanical standardization of semiconductor devices - Part 5:
Recommendations applying to integrated circuit packages using tape
automated bonding (TAB)
IEC
IEC 60749-29:2011
En Vigor
2011-04-07
Semiconductor devices - Mechanical and climatic test methods - Part 29:
Latch-up test
IEC
IEC TR 61912-1:2007
En Vigor
2007-08-23
Low-voltage switchgear and controlgear - Overcurrent protective devices
- Part 1: Application of short-circuit ratings
IEC
IEC 61249-4-16:2009
En Vigor
2009-05-26
Materials for printed boards and other interconnecting structures - Part
4-16: Sectional specification set for prepreg materials, unclad (for the
manufacture of multilayer boards) - Multifunctional non-halogenated
epoxide woven E-glass prepreg of defined flammability (vertical burning
test) for lead-free assembly
ISO
ISO/IEC 24741:2024
En Vigor
2024-06-12
Information technology — Biometrics — Overview and application
IEC
IEC 61671:2012
En Vigor
2012-06-21
Automatic Test Markup Language (ATML) for Exchanging Automatic Test
Equipment and Test Information via XML
IEC
IEC 60050-801:1994/AMD3:2021
En Vigor
2021-02-11
Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part
801: Acoustics and electroacoustics
IEC
IEC 60335-2-91:2008
En Vigor
2008-02-12
Household and similar electrical appliances - Safety - Part 2-91:
Particular requirements for walk-behind and hand-held lawn trimmers and
lawn edge trimmers
IEC
IEC 62326-4:1996
En Vigor
1996-12-19
Printed boards - Part 4: Rigid multilayer printed boards with interlayer
connections - Sectional specification
IEC
IEC 62209-3:2019
En Vigor
2019-09-24
Measurement procedure for the assessment of specific absorption rate of
human exposure to radio frequency fields from hand-held and body-mounted
wireless communication devices - Part 3: Vector measurement-based
systems (Frequency range of 600 MHz to 6 GHz)
IEC
IEC 60317-69:2017+AMD1:2024 CSV
En Vigor
2024-06-14
Specifications for particular types of winding wires - Part 69:
Polyester or polyesterimide overcoated with polyamide-imide enamelled
rectangular aluminium wire, class 220
IEC
