Filtrar:
IEC
IEC 60952-2:2013
En Vigor
2013-07-09
Aircraft batteries - Part 2: Design and construction requirements
IEC
IEC
IEC TR 60099-10:2024
En Vigor
2024-06-19
Surge arresters - Part 10: Rationale for tests specified by IEC 60099-4:2014
IEC
IEC 60896-21:2004
En Vigor
2004-02-05
Stationary lead-acid batteries - Part 21: Valve regulated types -
Methods of test
IEC
IEC
IEC 60884-1:2022
En Vigor
2022-08-04
Plugs and socket-outlets for household and similar purposes - Part 1:
General requirements
IEC
IEC TR 63340-1:2025
En Vigor
2025-01-09
Electronic displays for special applications - Part 1: General introduction
IEC
CISPR 16-1-5:2014/COR1:2020
En Vigor
2020-08-31
Corrigendum 1 - Specification for radio disturbance and immunity
measuring apparatus and methods - Part 1-5: Radio disturbance and
immunity measuring apparatus - Antenna calibration sites and reference
test sites for 5 MHz to 18 GHz
ISO
ISO/IEC 30122-4:2016
En Vigor
2016-07-29
Information technology — User interfaces — Voice commands — Part 4:
Management of voice command registration
IEC
IEC 60076-3:2013+AMD1:2018 CSV
En Vigor
2018-03-22
Power transformers - Part 3: Insulation levels, dielectric tests and
external clearances in air
ISO
ISO/IEC 14543-5-22:2010
En Vigor
2010-02-15
Information technology — Home electronic system (HES) architecture —
Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and
Class 3 — Application profile — File profile
IEC
IEC 61434:1996
En Vigor
1996-10-03
Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Guide to designation of current in alkaline secondary
cell and battery standards
ISO
ISO/IEC 23004-8:2009
En Vigor
2009-04-02
Information technology — Multimedia Middleware — Part 8: Reference software
IEC
IEC TS 61000-5-8:2009
En Vigor
2009-08-31
Electromagnetic compatibility (EMC) - Part 5-8: Installation and
mitigation guidelines - HEMP protection methods for the distributed infrastructure
IEC
IEC PAS 63267-3-31:2020
En Vigor
2020-02-07
Fibre optic interconnecting devices and passive components - Fibre optic
connector optical interfaces - Part 3-31: End face geometry - Flat PC
PPS rectangular ferrule multimode fibres
IEC
IEC TS 62271-304:2019
En Vigor
2019-03-21
High-voltage switchgear and controlgear - Part 304: Classification of
indoor enclosed switchgear and controlgear for rated voltages above 1 kV
up to and including 52 kV related to the use in special service
conditions with respect to condensation and pollution
IEC
IEC TS 61496-4-2:2022 RLV
En Vigor
2022-09-16
Safety of machinery - Electro-sensitive protective equipment - Part 4-2:
Particular requirements for equipment using vision based protective
devices (VBPD) - Additional requirements when using reference pattern
techniques (VBPDPP)
IEC
IEC 60884-2-3:2025
En Vigor
2025-02-21
Plugs and socket-outlets for household and similar purposes - Part 2-3:
Particular requirements for switched socket-outlets without interlock
for fixed installations
IEC
IEC TR 63289:2020
En Vigor
2020-09-29
Conceptual model for TC 100 standardization on multimedia cyber technology
IEC
IEC 60695-10-2:2014
En Vigor
2014-02-19
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC
IEC 62769-101-2:2023 RLV
En Vigor
2023-04-14
Field Device Integration (FDI)® - Part 101-2: Profiles - Foundation
Fieldbus HSE
IEC
IEC 61753-111-08:2021
En Vigor
2021-04-07
Fibre optic interconnecting devices and passive components - Performance
standard - Part 111-08: Sealed closures for category G - Ground
IEC
IEC TS 63074:2023
En Vigor
2023-02-09
Safety of machinery - Security aspects related to functional safety of
safety-related control systems
IEC
IEC 60240-1:1992
En Vigor
1992-07-31
Characteristics of electric infra-red emitters for industrial heating -
Part 1: Short wave infra-red emitters
IEC
IEC 61249-7-1:1995
En Vigor
1995-04-26
Materials for interconnection structures - Part 7: Sectional
specification set for restraining core materials - Section 1: Copper/invar/copper
IEC
IEC 62481-1-2:2017
En Vigor
2017-07-12
Digital living network alliance (DLNA) home networked device
interoperability guidelines - Part 1-2: Architecture and protocols -
Extended Digital Media Renderer
IEC
IEC 61000-4-17:1999+AMD1:2001 CSV
En Vigor
2002-07-08
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement
techniques - Ripple on d.c. input power port immunity test
IEC
IEC 60384-3-1:2006
En Vigor
2006-10-25
Fixed capacitors for use in electronic equipment - Part 3-1: Blank
detail specification: Surface mount fixed tantalum electrolytic
capacitors with manganese dioxide solid electrolyte - Assessment level EZ
IEC
IEC 60061-2P:1996
En Vigor
1996-02-01
Fourtheenth supplement - Lamp caps and holders together with gauges for
the control of interchangeability and safety. Part 2: Lampholders
IEC
IEC 60317-44:1997+AMD1:2010 CSV
En Vigor
2010-07-08
Specifications for particular types of winding wires - Part 44: Aromatic
polyimide tape wrapped rectangular copper wire, class 240
IEC
IEC 61988-2-6:2015
En Vigor
2015-03-25
Plasma display panels - Part 2-6: Measuring methods - APL dependent
gamma and colour characteristics
IEC
IEC 61000-3-3:2013
En Vigor
2013-05-14
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current ≤16 A per phase and not
subject to conditional connection
IEC
IEC 60317-27-3:2019/AMD1:2024
En Vigor
2024-06-13
Amendment 1 - Specifications for particular types of winding wires -
Part 27-3: Paper tape covered rectangular copper wire
IEC
IEC 60050-195:2021
En Vigor
2021-06-30
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and
protection against electric shock
ISO
ISO/IEC 7816-5:2004
En Vigor
2004-12-02
Identification cards — Integrated circuit cards — Part 5: Registration
of application providers
IEC
IEC 62386-304:2017
En Vigor
2017-05-19
Digital addressable lighting interface - Part 304: Particular
requirements - Input devices - Light sensor
IEC
IEC TR 63307:2020
En Vigor
2020-11-27
Measurement methods of the complex relative permeability and
permittivity of noise suppression sheet
IEC
IEC 60371-3-2:2005
En Vigor
2005-10-24
Insulating materials based on mica - Part 3: Specifications for
individual materials - Sheet 2: Mica paper
IEC
IEC 60512-12-6:1996
En Vigor
1996-01-30
Electromechanical components for electronic equipment - Basic testing
procedures and measuring methods - Part 12: Soldering tests - Section 6:
Test 12f: Sealing against flux and cleaning solvents in machine soldering
IEC
IEC 61067-3-1:1995
En Vigor
1995-04-13
Glass and glass polyester fibre woven tapes - Part 3: Specifications for
individual materials - Sheet 1: Type 1, 2 and 3 tapes
IEC
IEC
IEC 61188-5-3:2007
En Vigor
2007-10-30
Printed boards and printed board assemblies - Design and use - Part 5-3:
Attachment (land/joint) considerations - Components with gull-wing leads
on two sides
ISO
ISO/IEC 13522-5:1997
En Vigor
1997-04-24
Information technology — Coding of multimedia and hypermedia information
— Part 5: Support for base-level interactive applications
IEC
IEC TR 61948-1:2016
En Vigor
2016-03-24
Nuclear medicine instrumentation - Routine tests - Part 1: Gamma
radiation counting systems
IEC
IEC 62830-5:2021
En Vigor
2021-01-21
Semiconductor devices - Semiconductor devices for energy harvesting and
generation - Part 5: Test method for measuring generated power from
flexible thermoelectric devices
IEC
IEC 60061-2:1969/AMD53:2017
En Vigor
2017-12-15
Amendment 53 - Lamp caps and holders together with gauges for the
control of interchangeability and safety - Part 2: Lampholders
IEC
IEC 60086-3:2021/COR1:2023
En Vigor
2023-06-09
Corrigendum 1 - Primary batteries - Part 3: Watch batteries
IEC
IEC 61169-23:2025
En Vigor
2025-08-27
Radio-frequency connectors - Part 23: Pin and socket connector for use
with 3,5 mm rigid precision coaxial lines with inner diameter of outer
conductor of 3,5 mm (0,1378 in)
IEC
IEC 60050-441:1984
En Vigor
1984-01-01
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear,
controlgear and fuses
IEC
IEC 60670-23:2006+AMD1:2016 CSV
En Vigor
2016-02-24
Boxes and enclosures for electrical accessories for household andsimilar
fixed electrical installations - Part 23: Particular requirements for
floor boxes and enclosures
IEC
IEC 60061-3:1969/AMD55:2018
En Vigor
2018-08-23
Amendment 55 - Lamp caps and holders together with gauges for the
control of interchangeability and safety - Part 3: Gauges
IEC
IEC TR 61340-5-2:2018 RLV
En Vigor
2018-03-28
Electrostatics - Part 5-2: Protection of electronic devices from
electrostatic phenomena - User guide
IEC
IEC 60068-2-58:2015/AMD1:2017
En Vigor
2017-07-28
Amendment 1 - Environmental testing - Part 2-58: Tests - Test Td: Test
methods for solderability, resistance to dissolution of metallization
and to soldering heat of surface mounting devices (SMD)
IEC
IEC 61904:2000
En Vigor
2000-04-28
Video recording - Helical-scan digital component video cassette
recording format using 12,65 mm magnetic tape and incorporating data
compression (Format digital-L)
IEC
IEC 62026-3:2014/COR2:2019
En Vigor
2019-10-29
Corrigendum 2 - Low-voltage switchgear and controlgear -
Controller-device interfaces (CDIs) - Part 3: DeviceNet
IEC
IEC TS 62257-100:2022
En Vigor
2022-10-19
Renewable energy off-grid systems - Part 100: Overview of the IEC 62257 series
IEC
IEC 62841-2-22:2025 EXV
En Vigor
2025-06-04
Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery - Safety - Part 2-22: Particular requirements for
hand-held cut-off machines
IEC
IEC 60061-3:1969/AMD45:2011
En Vigor
2011-11-28
Amendment 45 - Lamp caps and holders together with gauges for the
control of interchangeability and safety - Part 3: Gauges
ISO
ISO/IEC 23008-12:2025
En Vigor
2025-07-03
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 12: Image File Format
IEC
IEC 61326-3-2:2017
En Vigor
2017-05-16
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 3-2: Immunity requirements for safety-related
systems and for equipment intended to perform safety-related functions
(functional safety) - Industrial applications with specified
electromagnetic environment
