Filtrar:
ISO
ISO 7627-6:1985
En Vigor
1985-04-04
Hardmetals — Chemical analysis by flame atomic absorption spectrometry —
Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m)
ISO
ISO 9813:2023
En Vigor
2023-10-20
Corrosion of metals and alloys — Performance test method for corrosion
inhibitors used in chemical cleaning of industry equipment
ISO
ISO 15733
En Vigor
2026-05-20
Fine ceramics (advanced ceramics, advanced technical ceramics) —
Mechanical properties of ceramic composites at ambient temperature in
air atmospheric pressure — Determination of tensile properties
ISO
ISO 7988:1988
En Vigor
1988-10-06
Woodworking machines — Double-end tenoning machines — Nomenclature and
acceptance conditions
ISO
ISO 21978:2023
En Vigor
2023-12-01
Air to water heat pumps — Testing and rating at part load conditions and
calculation of seasonal coefficient of performance for space heating
ISO
ISO
ISO 5725-6:1994/Cor 1:2001
En Vigor
2001-10-18
Accuracy (trueness and precision) of measurement methods and results —
Part 6: Use in practice of accuracy values — Technical Corrigendum 1
ISO
ISO 50007:2017
En Vigor
2017-07-07
Energy services — Guidelines for the assessment and improvement of the
energy service to users
ISO
ISO 17738-4:2026
En Vigor
2026-02-04
Thermal insulation products — Exterior insulation and finish systems
(EIFS) — Part 4: Site verification
ISO
ISO 11655:1995
En Vigor
1995-06-01
Measurement of liquid flow in open channels — Method of specifying
performance of hydrometric equipment
ISO
ISO 10896-5:2015
En Vigor
2015-12-09
Rough-terrain trucks — Safety requirements and verification — Part 5:
Interface between rough-terrain truck and integrated personnel work platform
ISO
ISO 8615:1991
En Vigor
1991-10-24
Implants for surgery — Fixation devices for use in the ends of the femur
in adults
ISO
ISO 211:2023
En Vigor
2023-05-02
Essential oils — General requirements for labelling and marking of containers
ISO
ISO 105-G02:1993
En Vigor
1993-09-30
Textiles — Tests for colour fastness — Part G02: Colour fastness to
burnt-gas fumes
ISO
ISO 5349-3
En Vigor
2025-11-14
Mechanical vibration — Measurement and evaluation of human exposure to
hand-transmitted vibration — Part 3: Isolated and repeated shocks using
the frequency range of ISO 5349-1
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 12947-3:1998
En Vigor
1998-12-20
Textiles — Determination of the abrasion resistance of fabrics by the
Martindale method — Part 3: Determination of mass loss
ISO
ISO 23551-11:2024
En Vigor
2024-11-22
Safety and control devices for gas burners and gas-burning appliances —
Particular requirements — Part 11: Automatic and semi-automatic shut-off
valves for operating pressure of above 500 kPa up to and including 6 300 kPa
ISO
ISO 13894-2:2005
En Vigor
2005-07-18
High-pressure decorative laminates — Composite elements — Part 2:
Specifications for composite elements with wood-based substrates for
interior use
ISO
ISO 11212-2:1997
En Vigor
1997-03-13
Starch and derived products — Heavy metals content — Part 2:
Determination of mercury content by atomic absorption spectrometry
ISO
ISO 13807:2022
En Vigor
2022-10-14
Vitreous and porcelain enamels — Determination of crack formation
temperature in the thermal shock testing of enamels for the chemical industry
ISO
ISO 6194-1:2007
En Vigor
2007-09-13
Rotary shaft lip-type seals incorporating elastomeric sealing elements —
Part 1: Nominal dimensions and tolerances
ISO
ISO 4892-3:2024
En Vigor
2024-10-03
Plastics — Methods of exposure to laboratory light sources — Part 3:
Fluorescent UV lamps
ISO
ISO 13041-4:2004
En Vigor
2004-01-14
Test conditions for numerically controlled turning machines and turning
centres — Part 4: Accuracy and repeatability of positioning of linear
and rotary axes
ISO
ISO 11292:1995
En Vigor
1995-06-08
Instant coffee — Determination of free and total carbohydrate contents —
Method using high-performance anion-exchange chromatography
ISO
ISO 10397:1993
En Vigor
1993-07-22
Stationary source emissions — Determination of asbestos plant emissions
— Method by fibre count measurement
ISO
ISO 6898:1984
En Vigor
1984-05-01
Open front mechanical power presses — Capacity ratings and dimensions
ISO
ISO
ISO 6933:1986
En Vigor
1986-06-05
Railway rolling stock material — Magnetic particle acceptance testing
ISO
ISO
ISO 10799-1:2011
En Vigor
2011-09-13
Cold-formed welded structural hollow sections of non-alloy and fine
grain steels — Part 1: Technical delivery conditions
ISO
ISO 10548:2002/Cor 1:2008
En Vigor
2008-09-24
Carbon fibre — Determination of size content — Technical Corrigendum 1
ISO
ISO/TS 24929-4:2026
En Vigor
2026-01-28
Child care articles — General safety — Part 4: Thermal hazards
ISO
ISO 7845:1985
En Vigor
1985-11-28
Horizontal joints between load-bearing walls and concrete floors —
Laboratory mechanical tests — Effect of vertical loading and of moments
transmitted by the floors
ISO
ISO 5673-2:2005
En Vigor
2005-03-07
Agricultural tractors and machinery — Power take-off drive shafts and
power-input connection — Part 2: Specification for use of PTO drive
shafts, and position and clearance of PTO drive line and PIC for various attachments
ISO
ISO 6667:1985
En Vigor
1985-10-31
Green coffee — Determination of proportion of insect-damaged beans
ISO
ISO 8263:1992
En Vigor
1992-04-09
Iron ore fines — Method for presentation of the results of sintering tests
ISO
ISO
ISO/TS 10303-1777:2008
En Vigor
2008-12-15
Industrial automation systems and integration — Product data
representation and exchange — Part 1777: Application module: External currency
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO/TS 10303-1330:2008
En Vigor
2008-12-15
Industrial automation systems and integration — Product data
representation and exchange — Part 1330: Application module:
Presentation hierarchy
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 16037:2002/Amd 1:2011
En Vigor
2011-02-11
Rubber condoms for clinical trials — Measurement of physical properties
— Amendment 1
