Filtrar:
ISO
ISO 14573:2002
En Vigor
2002-06-06
Snowboard strap bindings for soft boots — Requirements and test methods
ISO
ISO 9964-2:1993
En Vigor
1993-04-28
Water quality — Determination of sodium and potassium — Part 2:
Determination of potassium by atomic absorption spectrometry
ISO
ISO
ISO 3822-1:1999
En Vigor
1999-05-27
Acoustics — Laboratory tests on noise emission from appliances and
equipment used in water supply installations — Part 1: Method of measurement
ISO
ISO 4614:1977
En Vigor
1977-07-01
Plastics — Melamine-formaldehyde mouldings — Determination of
extractable formaldehyde
ISO
ISO 10511:2025
En Vigor
2025-06-13
Fasteners — Prevailing torque hexagon nuts — Thin nuts (with
non-metallic insert)
ISO
ISO
ISO 22765:2025
En Vigor
2025-01-10
Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for
ceramographic preparation for microstructure examination
ISO
ISO 12215-2:2002
En Vigor
2002-05-30
Small craft — Hull construction and scantlings — Part 2: Materials: Core
materials for sandwich construction, embedded materials
ISO
ISO 13450:1996
En Vigor
1996-05-09
Photography — 110-size cartridge, film and backing paper — Dimensions
ISO
ISO 16584:2002
En Vigor
2002-10-22
Open end blind rivets with break pull mandrel and protruding head —
NiCu/St or NiCu/SSt
ISO
ISO 20289:2025
En Vigor
2025-06-02
Surface chemical analysis — Total reflection X-ray fluorescence analysis
of water
ISO
ISO/TR 24107:2024
En Vigor
2024-12-11
Air quality — Validation of air quality measurement methods in the
standardization process
ISO
ISO 10782-1:1998
En Vigor
1998-04-30
Definitions and attributes of data elements for control and monitoring
of textile processes — Part 1: Spinning, spinning preparatory and
related processes
ISO
ISO
ISO 3400:1997
En Vigor
1997-04-10
Cigarettes — Determination of alkaloids in smoke condensates —
Spectrometric method
ISO
ISO 17591:2002
En Vigor
2002-11-08
Machinery for forestry — Knuckleboom log loaders — Identification
terminology, classification and component nomenclature
ISO
ISO 11431:2025
En Vigor
2025-08-27
Building and civil engineering sealants — Determination of adhesion and
cohesion properties of sealants after exposure to heat, water and
artificial light through glass
ISO
ISO 15859-5:2004
En Vigor
2004-06-08
Space systems — Fluid characteristics, sampling and test methods — Part
5: Nitrogen tetroxide propellants
ISO
ISO 12855:2025
En Vigor
2025-04-09
Electronic fee collection — Information exchange between service
provision and toll charging
ISO
ISO 687:2024
En Vigor
2024-03-15
Coke — Determination of moisture in the general analysis test sample
ISO
ISO 483:2005
En Vigor
2005-11-11
Plastics — Small enclosures for conditioning and testing using aqueous
solutions to maintain the humidity at a constant value
ISO
ISO/TS 10303-332:2002
En Vigor
2002-06-06
Industrial automation systems and integration — Product data
representation and exchange — Part 332: Abstract test suite: Technical
data packaging core information and exchange
ISO
ISO 9538:2025
En Vigor
2025-06-19
Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test
ISO
ISO/TS 20955:2024
En Vigor
2024-11-19
Footwear — Performance requirements for components for footwear — Insoles
ISO
ISO
ISO 19223-3:2025
En Vigor
2025-09-23
Lung ventilators and related equipment — Vocabulary and semantics — Part
3: Respiratory care
ISO
ISO 4262:1993
En Vigor
1993-09-02
Petroleum products — Determination of carbon residue — Ramsbottom method
ISO
ISO 15984:2002
En Vigor
2002-10-22
Open end blind rivets with break pull mandrel and countersunk head — A2/A2
ISO
ISO 7761:2004
En Vigor
2004-10-12
Micrographics — Single-core cartridge for 16 mm processed microfilm —
Dimensions and operational constraints
ISO
ISO 105-F07:2001
En Vigor
2001-02-08
Textiles — Tests for colour fastness — Part F07: Specification for
secondary acetate adjacent fabric
ISO
ISO 9269:1988
En Vigor
1988-12-08
Implants for surgery — Metal bone plates — Holes and slots corresponding
to screws with conical under-surface
ISO
ISO 3832:2002
En Vigor
2002-06-13
Passenger cars — Luggage compartments — Method of measuring reference volume
ISO
ISO/DIS 7396-1
En Vigor
2025-07-19
Medical gas pipeline systems — Part 1: Pipeline systems for compressed
medical gases and vacuum
ISO
ISO
ISO 13999-3:2002
En Vigor
2002-06-27
Protective clothing — Gloves and arm guards protecting against cuts and
stabs by hand knives — Part 3: Impact cut test for fabric, leather and
other materials
ISO
ISO 6538:1997
En Vigor
1997-10-23
Cassia, Chinese type, Indonesian type and Vietnamese type [Cinnamomum
aromaticum (Nees) syn. Cinnamomum cassia (Nees) ex Blume, Cinnamomum
burmanii (C.G. Nees) Blume and Cinnamomum loureirii Nees] — Specification
ISO
ISO 13758:1996
En Vigor
1996-12-12
Liquefied petroleum gases — Assessment of the dryness of propane — Valve
freeze method
ISO
ISO 9984:1996
En Vigor
1996-12-26
Information and documentation — Transliteration of Georgian characters
into Latin characters
ISO
ISO
ISO 9556:2025
En Vigor
2025-07-08
Steel and iron — Determination of total carbon content — Infrared
absorption method after combustion in an induction furnace
ISO
ISO 5838-2:1991
En Vigor
1991-01-17
Implants for surgery — Skeletal pins and wires — Part 2: Steinmann
skeletal pins — Dimensions
ISO
ISO 5960:1984
En Vigor
1984-05-01
Copper alloys — Determination of cadmium content — Flame atomic
absorption spectrometric method
ISO
ISO 13936-3:2005
En Vigor
2005-03-08
Textiles — Determination of the slippage resistance of yarns at a seam
in woven fabrics — Part 3: Needle clamp method
ISO
ISO 5979:1982
En Vigor
1982-11-01
Rubber or plastics coated fabrics — Determination of flexibility — Flat
loop method
ISO
ISO 3597-3:2003
En Vigor
2003-09-29
Textile-glass-reinforced plastics — Determination of mechanical
properties on rods made of roving-reinforced resin — Part 3:
Determination of compressive strength
ISO
ISO
ISO
ISO 6157-1:1988
En Vigor
1988-07-28
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs
for general requirements
ISO
ISO 11752:2000
En Vigor
2000-10-26
Flexible cellular polymeric materials — Moulded and extruded sponge or
expanded cellular rubber products — Compressibility test on finished parts
ISO
ISO 15234:1999
En Vigor
1999-02-04
Paints and varnishes — Testing of formaldehyde-emitting coatings and
melamine foams — Determination of the steady-state concentration of
formaldehyde in a small test chamber
ISO
ISO 4435:2003
En Vigor
2003-02-13
Plastics piping systems for non-pressure underground drainage and
sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
ISO
ISO 1268-5:2001
En Vigor
2001-06-14
Fibre-reinforced plastics — Methods of producing test plates — Part 5:
Filament winding
ISO
ISO 4892-4:2024
En Vigor
2024-12-04
Plastics — Methods of exposure to laboratory light sources — Part 4:
Open-flame carbon-arc lamps
ISO
ISO
ISO 14019-4:2026
En Vigor
2026-02-06
Sustainability information — Part 4: Principles and requirements for
bodies validating and verifying sustainability information
ISO
ISO
ISO 6311:1980
En Vigor
1980-06-01
Road vehicles — Brake linings — Internal shear strength of lining
material — Test procedure
ISO
ISO 14592-1:2002
En Vigor
2002-11-19
Water quality — Evaluation of the aerobic biodegradability of organic
compounds at low concentrations — Part 1: Shake-flask batch test with
surface water or surface water/sediment suspensions
ISO
ISO 11428:1996
En Vigor
1996-12-12
Ergonomics — Visual danger signals — General requirements, design and testing
