Filtrar:
ISO
ISO 20932-3:2018/Amd 1:2025
En Vigor
2025-11-07
Textiles — Determination of the elasticity of fabrics — Part 3: Narrow
fabrics — Amendment 1
ISO
ISO/IEC DIS 14443-3
En Vigor
2025-11-07
Cards and security devices for personal identification — Contactless
proximity objects — Part 3: Initialization and anticollision
ISO
ISO/IEC 17839-1:2025
En Vigor
2025-11-07
Information technology — Biometric system-on-card — Part 1: Core requirements
ISO
ISO
ISO 17168-4:2025
En Vigor
2025-11-07
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for air-purification performance of semiconducting photocatalytic
materials under indoor lighting environment — Part 4: Removal of formaldehyde
ISO
ISO 12994:2025
En Vigor
2025-11-07
Electrodeposited nickel plus chromium coatings for automobile plastic
parts — Specification and test requirements
ISO
ISO 5403-1:2025
En Vigor
2025-11-07
Leather — Determination of water resistance of flexible leather — Part
1: Repeated linear compression (penetrometer)
ISO
ISO 16359:2025
En Vigor
2025-11-07
Horology — Harmonized practices to demonstrate chemical regulatory
compliance of wrist-watches
ISO
ISO 16666:2025
En Vigor
2025-11-07
Surface chemical analysis — Total reflection X-ray fluorescence —
Principles and general requirements
ISO
ISO 18060
En Vigor
2025-11-07
Sustainable tourism — Indicators for organizations in the tourism value
chain — Requirements and guidance for use
ISO
ISO 17168-1:2025
En Vigor
2025-11-07
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for air-purification performance of semiconducting photocatalytic
materials under indoor lighting environment — Part 1: Removal of nitric oxide
ISO
ISO/TS 22726-1:2025
En Vigor
2025-11-07
Intelligent transport systems — Dynamic data and map database
specification for connected and automated driving system applications —
Part 1: Architecture and logical data model for harmonization of static
map data
ISO
ISO 13956:2025
En Vigor
2025-11-07
Plastics pipes and fittings — Decohesion test of polyethylene (PE)
saddle fusion joints — Evaluation of ductility of fusion joint interface
by tear test
ISO
ISO 11040-3:2025
En Vigor
2025-11-07
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
ISO
ISO 11982:2025
En Vigor
2025-11-07
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
— Liquefied Natural Gas (LNG) as marine fuel — Measurement on board LNG
bunkering ship
ISO
ISO/FDIS 20895
En Vigor
2025-11-06
Welded joints performance for seismic steel structures
ISO
ISO/DIS 23247-6
En Vigor
2025-11-06
Automation systems and integration — Digital twin framework for
manufacturing — Part 6: Digital twin composition
ISO
ISO/FDIS 148-4
En Vigor
2025-11-06
Metallic materials — Charpy pendulum impact test — Part 4: Testing of
miniature Charpy - type V-notch test pieces
ISO
ISO 12312-1:2022/FDAmd 1
En Vigor
2025-11-06
Eye and face protection — Sunglasses and related eyewear — Part 1:
Sunglasses for general use — Amendment 1
ISO
ISO/ASTM 52940:2025
En Vigor
2025-11-06
Additive manufacturing of ceramics — Feedstock materials —
Characterization of ceramic slurry in vat photopolymerization
ISO
ISO 7752-2
En Vigor
2025-11-06
Cranes — Control layout and characteristics — Part 2: Basic arrangement
and requirements for mobile cranes
ISO
ISO/IEC 9234:2025
En Vigor
2025-11-06
Information technology — Information modelling for virtual, augmented
and mixed reality based education and training systems
ISO
ISO
ISO 21182:2025
En Vigor
2025-11-06
Light conveyor belts — Determination of the coefficient of friction
ISO
ISO 21180:2025
En Vigor
2025-11-06
Light conveyor belts — Determination of the maximum tensile strength
ISO
ISO
ISO/IEC 23090-33:2025
En Vigor
2025-11-06
Information technology — Coded representation of immersive media — Part
33: Conformance and reference software for haptics coding
ISO
ISO
ISO/IEC FDIS 15944-8
En Vigor
2025-11-06
Information technology — Business operational view — Part 8:
Identification of privacy protection requirements as external
constraints on business transactions
ISO
ISO/FDIS 17090-4
En Vigor
2025-11-06
Health informatics — Public key infrastructure — Part 4: Digital
signatures for healthcare documents
ISO
ISO 17168-3:2025
En Vigor
2025-11-06
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for air-purification performance of semiconducting photocatalytic
materials under indoor lighting environment — Part 3: Removal of toluene
ISO
ISO/IEC 23093-2
En Vigor
2025-11-06
Information technology — Internet of media things — Part 2: Discovery
and communication application programming interface (API)
ISO
ISO 14577-6:2025
En Vigor
2025-11-06
Metallic materials — Instrumented indentation test for hardness and
materials parameters — Part 6: Instrumented indentation test at elevated temperature
ISO
ISO 15270-5:2025
En Vigor
2025-11-06
Plastics — Guidelines for the recovery and recycling of plastics waste —
Part 5: Organic/biological recycling
ISO
ISO 17138:2025
En Vigor
2025-11-06
Fine ceramics (advanced ceramics, advanced technical ceramics) —
Mechanical properties of ceramic composites at room temperature —
Determination of flexural strength
ISO
ISO 13659
En Vigor
2025-11-06
Chain of custody — Book and claim — Requirements and guidelines
ISO
ISO 27928
En Vigor
2025-11-06
Carbon dioxide capture, transportation and storage — Carbon dioxide
capture — Performance evaluation methods for CO2 capture connected to a
CO2 intensive plant
ISO
ISO 21181:2025
En Vigor
2025-11-06
Light conveyor belts — Determination of the relaxed elastic modulus
ISO
ISO/DTS 23818-1
En Vigor
2025-11-05
Assessment of conformity of plastics piping systems for the
rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
ISO
ISO/FDIS 7729
En Vigor
2025-11-05
Typical vertical joints between two prefabricated ordinary concrete
external wall components — Properties, characteristics and
classification criteria
ISO
ISO/DTS 23818-3
En Vigor
2025-11-05
Assessment of conformity of plastics piping systems for the
rehabilitation of existing pipelines — Part 3: Unplasticised poly(vinyl
chloride) (PVC-U) material
ISO
ISO/FDIS 7728
En Vigor
2025-11-05
Typical horizontal joints between an external wall of prefabricated
ordinary concrete components and a concrete floor — Properties,
characteristics and classification criteria
ISO
ISO/DIS 13180-1
En Vigor
2025-11-05
A guideline on direct tension test method for fibre-reinforced
cementitious composites (FRCCs) — Part 1: Strain-hardening FRCC
ISO
ISO/DIS 6460-2
En Vigor
2025-11-05
Motorcycles — Measurement method for gaseous exhaust emissions and fuel
consumption — Part 2: Test cycles and specific test conditions
ISO
ISO 18318
En Vigor
2025-11-05
Railway applications — Wheel-rail contact geometry parameters —
Definitions and methods for evaluation
ISO
ISO
ISO
ISO/DIS 12006-2.2
En Vigor
2025-11-05
Building construction — Organization of information about construction
works — Part 2: Framework for classification and breakdown structures
ISO
ISO 18953
En Vigor
2025-11-05
Steel structures — Structural bolting — Test methods to determine loss
of pretension from faying surface coatings
ISO
ISO/FDIS 11300-3
En Vigor
2025-11-05
Piping systems for rehabilitation of underground drains, sewers and
water supply networks — Part 3: Unplasticized poly (vinyl chloride)
(PVC-U) material
ISO
ISO/FDIS 17934
En Vigor
2025-11-05
Condition monitoring and diagnostics of machines — Reciprocating compressors
ISO
ISO/IEC TR 23888-3
En Vigor
2025-11-05
Information technology — Artificial intelligence for multimedia — Part
3: Optimization of encoders and receiving systems for machine analysis
of coded video content
ISO
ISO/DTS 24110
En Vigor
2025-11-05
Plastics — Method of exposure to combined UV radiation and creep load
ISO
ISO/DTS 5137
En Vigor
2025-11-05
Medical device maintenance management programme for healthcare delivery
organizations (HDO)
ISO
ISO 14156:2025
En Vigor
2025-11-05
Milk and milk products — Extraction methods for lipids and liposoluble compounds
ISO
ISO/FDIS 11295
En Vigor
2025-11-05
Plastics piping systems used for the rehabilitation of pipelines —
Classification and overview of strategic, tactical and operational activities
ISO
ISO/IEC 23090-34:2025
En Vigor
2025-11-05
Information technology — Coded representation of immersive media — Part
34: Immersive audio reference software
ISO
ISO/FDIS 11300-1
En Vigor
2025-11-05
Piping systems for rehabilitation of underground drains, sewers and
water supply networks — Part 1: Polyethylene (PE) material
ISO
ISO/FDIS 20500-2
En Vigor
2025-11-05
Mobile road construction machinery — Safety — Part 2: Specific
requirements for road-milling machines
ISO
ISO/FDIS 20500-7
En Vigor
2025-11-05
Mobile road construction machinery — Safety — Part 7: Specific
requirements for slipform pavers and related machines
