Filtrar:
ISO
ISO
ISO/TR 7250-4:2023
En Vigor
2023-10-25
Basic human body measurements for technological design — Part 4:
Expected performance of skilled anthropometrists
ISO
ISO 16276-1:2025
En Vigor
2025-06-05
Corrosion protection of steel structures by protective paint systems —
Assessment of, and acceptance criteria for, the adhesion/cohesion
(fracture strength) of a coating — Part 1: Pull-off testing
ISO
ISO 9308-3:1998
En Vigor
1998-11-05
Water quality — Detection and enumeration of Escherichia coli and
coliform bacteria — Part 3: Miniaturized method (Most Probable Number)
for the detection and enumeration of E. coli in surface and waste water
ISO
ISO 3224:1998
En Vigor
1998-11-26
Aerospace — Nuts, anchor, self-locking, floating, single lug, with
counterbore, with MJ threads, classifications: 1 100 MPa (at ambient
temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315
degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
ISO
ISO 10147:2011
En Vigor
2011-08-30
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation
of the degree of crosslinking by determination of the gel content
ISO
ISO 12115:1997
En Vigor
1997-05-15
Fibre-reinforced plastics — Thermosetting moulding compounds and
prepregs — Determination of flowability, maturation and shelf life
ISO
ISO/DIS 13326
En Vigor
2025-11-25
Test methods for measuring tyre uniformity
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 10545-5:1996/Cor 1:1997
En Vigor
1997-02-06
Ceramic tiles — Part 5: Determination of impact resistance by
measurement of coefficient of restitution — Technical Corrigendum 1
ISO
ISO 105-E11:1994
En Vigor
1994-09-15
Textiles — Tests for colour fastness — Part E11: Colour fastness to steaming
ISO
ISO 13450:1996/Cor 1:2001
En Vigor
2001-09-13
Photography — 110-size cartridge, film and backing paper — Dimensions —
Technical Corrigendum 1
ISO
ISO 11632:1998
En Vigor
1998-03-12
Stationary source emissions — Determination of mass concentration of
sulfur dioxide — Ion chromatography method
ISO
ISO 5356-1:2015
En Vigor
2015-03-13
Anaesthetic and respiratory equipment — Conical connectors — Part 1:
Cones and sockets
ISO
ISO 11970:2025
En Vigor
2025-11-14
Specification and qualification of welding procedures for production
welding of steel and nickel-base castings
ISO
ISO 19581:2025
En Vigor
2025-09-24
Measurement of radioactivity — Gamma emitting radionuclides — Rapid
screening method using scintillation detector gamma-ray spectrometry
ISO
ISO
ISO 15359:1999
En Vigor
1999-09-30
Paper and board — Determination of the static and kinetic coefficients
of friction — Horizontal plane method
ISO
ISO 16050:2003
En Vigor
2003-08-27
Foodstuffs — Determination of aflatoxin B1, and the total content of
aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products —
High-performance liquid chromatographic method
ISO
ISO 17590:2025
En Vigor
2025-07-02
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods
of tests for reinforcements — Determination of the tensile properties of
ceramic filaments at elevated temperature in air using the hot grip technique
ISO
ISO 5247-1:2004
En Vigor
2004-11-23
Textile machinery and accessories — Weaving machines — Part 1:
Vocabulary and classification
ISO
ISO
ISO 12280:1999
En Vigor
1999-10-21
Aerospace — Retainers, spring, sheet metal, for self-locking barrel nuts
— Dimensions
ISO
ISO 6708:1995
En Vigor
1995-06-22
Pipework components — Definition and selection of DN (nominal size)
ISO
ISO 17646:2025
En Vigor
2025-05-08
Rapid detection of moisture content in fresh meat — Low-field nuclear
magnetic resonance (LF-NMR) method
ISO
ISO 15788-1:1999
En Vigor
1999-10-28
Animal and vegetable fats and oils — Determination of stigmastadienes in
vegetable oils — Part 1: Method using capillary-column gas
chromatography (Reference method)
ISO
ISO
ISO 7884-3:1987
En Vigor
1987-11-26
Glass — Viscosity and viscometric fixed points — Part 3: Determination
of viscosity by fibre elongation viscometer
ISO
ISO/TS 17379-2:2013
En Vigor
2013-06-24
Water quality — Determination of selenium — Part 2: Method using hydride
generation atomic absorption spectrometry (HG-AAS)
ISO
ISO 11933-2:1997
En Vigor
1997-07-24
Components for containment enclosures — Part 2: Gloves, welded bags,
gaiters for remote - handling tongs and for manipulators
ISO
ISO 15853:1999
En Vigor
1999-11-25
Thermoplastics materials — Preparation of tubular test pieces for the
determination of the hydrostatic strength of materials used for
injection moulding
ISO
ISO
ISO 21023:2025
En Vigor
2025-12-11
Textiles — Determination of surface chemical properties of carbon fibres
using X-ray photoelectron spectroscopy
ISO
ISO 3575:2025
En Vigor
2025-04-01
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel
sheet of commercial and drawing qualities
ISO
ISO 19901-2
En Vigor
2026-04-30
Specific requirements for offshore structures — Part 2: Seismic design
ISO
ISO 17652-1:2003
En Vigor
2003-05-28
Welding — Test for shop primers in relation to welding and allied
processes — Part 1: General requirements
ISO
ISO 14229-4:2012
En Vigor
2012-11-30
Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified
diagnostic services on FlexRay implementation (UDSonFR)
ISO
ISO 17892-4:2016
En Vigor
2016-10-28
Geotechnical investigation and testing — Laboratory testing of soil —
Part 4: Determination of particle size distribution
ISO
ISO 9034:1987
En Vigor
1987-06-25
Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
ISO
ISO 22899-3:2025
En Vigor
2025-01-23
Determination of the resistance to jet fires of passive fire protection
materials — Part 3: Extended test requirements
ISO
ISO 9367-1:1989
En Vigor
1989-11-09
Lashing and securing arrangements on road vehicles for sea
transportation on Ro/Ro ships — General requirements — Part 1:
Commercial vehicles and combinations of vehicles, semi-trailers excluded
ISO
ISO 15840:2004
En Vigor
2004-03-30
Ships and marine technology — Standard specification for thermosetting
resin fibreglass pipe and fittings to be used for marine applications
ISO
ISO 10303-519:2000/Cor 1:2000
En Vigor
2000-10-19
Industrial automation systems and integration — Product data
representation and exchange — Part 519: Application interpreted
construct: Geometric tolerances — Technical Corrigendum 1
ISO
ISO 10080:1990
En Vigor
1990-12-06
Refractory products — Classification of dense, shaped acid-resisting products
ISO
ISO 6855-1:2012
En Vigor
2012-09-20
Mopeds — Measurement method for gaseous exhaust emissions and fuel
consumption — Part 1: General test requirements
ISO
ISO 18435-2:2012
En Vigor
2012-08-21
Industrial automation systems and integration — Diagnostics, capability
assessment and maintenance applications integration — Part 2:
Descriptions and definitions of application domain matrix elements
ISO
ISO 10702:1993
En Vigor
1993-06-24
Steel and iron — Determination of nitrogen content — Titrimetric method
after distillation
ISO
ISO/DIS 20421-1
En Vigor
2025-04-22
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part
1: Design, fabrication, inspection and testing
ISO
ISO/TS 7821:2005
En Vigor
2005-02-17
Tobacco and tobacco products — Preparation and constitution of identical
samples from the same lot for collaborative studies for the evaluation
of test methods
ISO
ISO 10303-233:2012
En Vigor
2012-11-13
Industrial automation systems and integration — Product data
representation and exchange — Part 233: Application protocol: Systems engineering
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 6328:2000
En Vigor
2000-05-04
Photography — Photographic materials — Determination of ISO resolving power
ISO
ISO/DIS 11193-1
En Vigor
2025-10-28
Single-use medical examination gloves — Part 1: Specification for gloves
made from rubber latex or rubber solution
ISO
ISO 15038:1999
En Vigor
1999-06-24
Plastics — Organic-perester crosslinking agents for
unsaturated-polyester thermosetting materials — Determination of
active-oxygen content
ISO
ISO 5692-3:2011
En Vigor
2011-07-14
Agricultural vehicles — Mechanical connections on towed vehicles — Part
3: Swivel hitch rings
ISO
ISO 15310:1999
En Vigor
1999-12-16
Fibre-reinforced plastic composites — Determination of the in-plane
shear modulus by the plate twist method
ISO
ISO/TR 12389:2009
En Vigor
2009-04-20
Methods of testing cement — Report of a test programme — Chemical
analysis by x-ray fluorescence
ISO
ISO 6899:1984
En Vigor
1984-05-01
Acceptance conditions of open front mechanical power presses — Testing
of the accuracy
ISO
ISO 809:1973
En Vigor
1973-12-01
Magnesium and magnesium alloys — Determination of manganese — Periodate
photometric method (Manganese content between 0,01 and 0,8 %)
ISO
ISO 6897:1984
En Vigor
1984-08-01
Guidelines for the evaluation of the response of occupants of fixed
structures, especially buildings and off-shore structures, to
low-frequency horizontal motion (0,063 to 1 Hz)
ISO
ISO 11315-1:1997
En Vigor
1997-11-13
Photography — Projection in indoor rooms — Part 1: Screen illumination
test for still projectors
ISO
ISO 5834-4:2025
En Vigor
2025-07-04
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part
4: Oxidation index measurement method










