Filtrar:
ISO
ISO 13758:1996/Amd 1:2020
En Vigor
2020-01-31
Liquefied petroleum gases — Assessment of the dryness of propane — Valve
freeze method — Amendment 1
ISO
ISO 18868:2013/Amd 1:2020
En Vigor
2020-01-31
Commercial road vehicles — Coupling equipment between vehicles in
multiple vehicle combinations — Strength requirements — Amendment 1:
Clarification for calculation for V-value for combinations including a
centre axel trailer (CAT)
ISO
ISO 3865:2020
En Vigor
2020-01-31
Rubber, vulcanized or thermoplastic — Methods of test for staining in
contact with organic material
ISO
ISO 11076:2020
En Vigor
2020-01-31
Aircraft — Deicing/anti-icing methods on the ground
ISO
ISO 4987:2020
En Vigor
2020-01-31
Steel and iron castings — Liquid penetrant testing
ISO
ISO 11525-2:2020
En Vigor
2020-01-31
Rough-terrain trucks — Safe use requirements — Part 2: Slewing
variable-reach trucks
ISO
ISO 11525-1:2020
En Vigor
2020-01-31
Rough-terrain trucks — Safe use requirements — Part 1: Variable-reach trucks
ISO
ISO 17257:2020
En Vigor
2020-01-30
Rubber — Identification of polymers — Pyrolytic gas-chromatographic
method using mass-spectrometric detection
ISO
ISO 21910-1:2020
En Vigor
2020-01-30
Fine bubble technology — Characterization of microbubbles — Part 1:
Off-line evaluation of size index
ISO
ISO 14006:2020
En Vigor
2020-01-30
Environmental management systems — Guidelines for incorporating ecodesign
ISO
ISO
ISO/IEC TS 22424-2:2020
En Vigor
2020-01-29
Digital publishing — EPUB3 preservation — Part 2: Metadata requirements
ISO
ISO/IEC 19823-10:2020
En Vigor
2020-01-29
Information technology — Conformance test methods for security service
crypto suites — Part 10: Crypto suite AES-128
ISO
ISO/IEC TS 22424-1:2020
En Vigor
2020-01-29
Digital publishing — EPUB3 preservation — Part 1: Principles
ISO
ISO 1501:2009/Amd 1:2020
En Vigor
2020-01-29
ISO miniature screw threads — Amendment 1: The figure for the tolerance
zone of external thread
ISO
ISO 6292:2020
En Vigor
2020-01-29
Powered industrial trucks and tractors — Brake performance and component strength
ISO
ISO 3875:2020
En Vigor
2020-01-29
Machine tools — Test conditions for external cylindrical centreless
grinding machines — Testing of the accuracy
ISO
ISO/TS 15143-3:2020
En Vigor
2020-01-29
Earth-moving machinery and mobile road construction machinery — Worksite
data exchange — Part 3: Telematics data
ISO
ISO 24117:2020
En Vigor
2020-01-29
Tableware, giftware, jewellery and luminaries, made of glass — Glass
clarity — Classification and test method
ISO
ISO 10791-7:2020
En Vigor
2020-01-29
Test conditions for machining centres — Part 7: Accuracy of finished
test pieces
ISO
ISO 22915-17:2020
En Vigor
2020-01-29
Industrial trucks — Verification of stability — Part 17: Towing
tractors, burden and personnel carriers
ISO
ISO 21222:2020
En Vigor
2020-01-29
Surface chemical analysis — Scanning probe microscopy — Procedure for
the determination of elastic moduli for compliant materials using atomic
force microscope and the two-point JKR method
ISO
ISO 20887:2020
En Vigor
2020-01-28
Sustainability in buildings and civil engineering works — Design for
disassembly and adaptability — Principles, requirements and guidance
ISO
ISO 22764:2020
En Vigor
2020-01-27
Jewellery and precious metals — Fineness of solders used with precious
metal jewellery alloys
ISO
ISO 10113:2020
En Vigor
2020-01-27
Metallic materials — Sheet and strip — Determination of plastic strain ratio
ISO
ISO/TS 22176:2020
En Vigor
2020-01-27
Cosmetics — Analytical methods — Development of a global approach for
validation of quantitative analytical methods
ISO
ISO/IEC 14496-14:2020
En Vigor
2020-01-27
Information technology — Coding of audio-visual objects — Part 14: MP4
file format
ISO
ISO/IEC 27050-3:2020
En Vigor
2020-01-27
Information technology — Electronic discovery — Part 3: Code of practice
for electronic discovery
ISO
ISO 14813-5:2020
En Vigor
2020-01-27
Intelligent transport systems — Reference model architecture(s) for the
ITS sector — Part 5: Requirements for architecture description in ITS standards
ISO
ISO/TS 23564:2020
En Vigor
2020-01-27
Image technology colour management — Evaluating colour transform
accuracy in ICC profiles
ISO
ISO/IEC 23003-5:2020
En Vigor
2020-01-27
Information technology — MPEG audio technologies — Part 5: Uncompressed
audio in MPEG-4 file format
ISO
ISO 11136:2014/Amd 1:2020
En Vigor
2020-01-27
Sensory analysis — Methodology — General guidance for conducting hedonic
tests with consumers in a controlled area — Amendment 1
ISO
ISO 6621-5:2020
En Vigor
2020-01-27
Internal combustion engines — Piston rings — Part 5: Quality requirements
ISO
ISO/IEC 21972:2020
En Vigor
2020-01-27
Information technology — Upper level ontology for smart city indicators
ISO
ISO 2648:2020
En Vigor
2020-01-27
Wool — Determination of fibre length distribution parameters —
Capacitance method
ISO
ISO 3071:2020
En Vigor
2020-01-27
Textiles — Determination of pH of aqueous extract
ISO
ISO 19161-1:2020
En Vigor
2020-01-24
Geographic information — Geodetic references — Part 1: International
terrestrial reference system (ITRS)
ISO
ISO 21404:2020
En Vigor
2020-01-23
Solid biofuels — Determination of ash melting behaviour
ISO
ISO 7725:2020
En Vigor
2020-01-23
Rubber and rubber products — Determination of chlorine and bromine content
ISO
ISO 29903-1:2020
En Vigor
2020-01-22
Comparison of toxic gas data from different tests — Part 1: Guidance and requirements
ISO
ISO 21307:2017/Amd 1:2020
En Vigor
2020-01-22
Plastics pipes and fittings — Butt fusion jointing procedures for
polyethylene (PE) piping systems — Amendment 1
ISO
ISO/IEC 27007:2020
En Vigor
2020-01-21
Information security, cybersecurity and privacy protection — Guidelines
for information security management systems auditing
ISO
ISO 21138-3:2020
En Vigor
2020-01-20
Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3:
Pipes and fittings with non-smooth external surface, Type B
ISO
ISO 21138-2:2020
En Vigor
2020-01-20
Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2:
Pipes and fittings with smooth external surface, Type A
ISO
ISO 21138-1:2020
En Vigor
2020-01-20
Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1:
Material specification and performance criteria for pipes, fittings and systems
ISO
ISO/TS 21831:2020
En Vigor
2020-01-20
Information model of Chinese materia medica processing
ISO
ISO 4259-3:2020
En Vigor
2020-01-16
Petroleum and related products — Precision of measurement methods and
results — Part 3: Monitoring and verification of published precision
data in relation to methods of test
ISO
ISO 21256-2:2020
En Vigor
2020-01-16
Fine bubble technology — Cleaning applications — Part 2: Test method for
cleaning machine-oil stained surfaces of machined metal parts
ISO
ISO 28620:2020
En Vigor
2020-01-16
Medical devices — Non-electrically driven portable infusion devices
ISO
ISO/CD TS 22152.2
En Vigor
2020-01-15
Ships and marine technology — Performance requirements for low
bio-persistence alkaline earth silicate wool
ISO
ISO 22252:2020
En Vigor
2020-01-15
Manned submersibles — Breathing air supply and CO2 adsorption systems —
Performance requirements and recommendations
ISO
ISO 20766-11:2020
En Vigor
2020-01-15
Road vehicles — Liquefied petroleum gas (LPG) fuel systems components —
Part 11: Manual shut-off valve
ISO
ISO 16049-1:2020
En Vigor
2020-01-14
Air cargo equipment — Restraint straps — Part 1: Design criteria and
testing methods
ISO
ISO 10993-18:2020
En Vigor
2020-01-13
Biological evaluation of medical devices — Part 18: Chemical
characterization of medical device materials within a risk management process
ISO
ISO 19432-1:2020
En Vigor
2020-01-13
Building construction machinery and equipment — Portable, hand-held,
internal combustion engine-driven abrasive cutting machines — Part 1:
Safety requirements for cut-off machines for centre-mounted rotating
abrasive wheels
ISO
ISO 21801-1:2020
En Vigor
2020-01-13
Cognitive accessibility — Part 1: General guidelines
ISO
ISO 21980:2020
En Vigor
2020-01-13
Space systems — Evaluation of radiation effects on
Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite
ISO
ISO 11665-3:2020
En Vigor
2020-01-13
Measurement of radioactivity in the environment — Air: radon-222 — Part
3: Spot measurement method of the potential alpha energy concentration
of its short-lived decay products
ISO
ISO 11665-5:2020
En Vigor
2020-01-13
Measurement of radioactivity in the environment — Air: radon-222 — Part
5: Continuous measurement methods of the activity concentration
ISO
ISO 22449-1:2020
En Vigor
2020-01-13
Use of reclaimed water in industrial cooling systems — Part 1: Technical guidelines
