Filtrar:
ISO
ISO 21177:2024
En Vigor
2024-03-19
Intelligent transport systems — ITS station security services for secure
session establishment and authentication between trusted devices
ISO
ISO
ISO 15611:2024
En Vigor
2024-01-10
Specification and qualification of welding procedures for metallic
materials — Qualification based on previous welding experience
ISO
ISO 9211-2:2024
En Vigor
2024-02-06
Optics and photonics — Optical coatings — Part 2: Optical properties
ISO
ISO 19618:2025
En Vigor
2025-01-13
Fine ceramics (advanced ceramics, advanced technical ceramics) —
Measurement method for normal spectral emissivity using blackbody
reference with an FTIR spectrometer
ISO
ISO
ISO 8437-4:2019/Amd 1
En Vigor
2026-03-21
Snow throwers — Safety requirements and test procedures — Part 4:
Additional national and regional requirements — Amendment 1
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 7042:2025
En Vigor
2025-06-12
Fasteners — Prevailing torque hexagon nuts — High nuts (all metal)
ISO
ISO/IEC 27566-1
En Vigor
2025-10-31
Information security, cybersecurity and privacy protection — Age
assurance systems — Part 1: Framework
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO/DIS 20018-1
En Vigor
2025-07-25
Fine bubble technology — Characterization of ultrafine bubbles — Part 1:
Data correction to exclude particulate contaminants for evaluating size
and concentration indices
ISO
ISO
ISO/FDIS 27875
En Vigor
2025-10-27
Space systems — Re-entry risk management for uncrewed spacecraft and
launch vehicle orbital stages
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 14533-3:2025
En Vigor
2025-10-21
Processes, data elements and documents in commerce, industry and
administration — Long-term signature — Part 3: Profiles for PDF Advanced
Electronic Signatures (PAdES)
ISO
ISO
ISO 13947:2024
En Vigor
2024-11-25
Metallic powders — Test method for the determination of non-metallic
inclusions in metal powders using a powder-forged specimen
ISO
ISO/DIS 24304
En Vigor
2026-02-17
Textiles — Determination of the aerobic biodegradation of textile
materials in seawater by measuring the biochemical oxygen demand or the
amount of evolved carbon dioxide
ISO
ISO/DIS 15686-3.2
En Vigor
2025-12-08
Buildings and civil engineering works — Service life planning — Part 3:
Methods, data and communication
ISO
ISO 22786:2025
En Vigor
2025-10-24
Textiles — Animal welfare in the supply chain — General requirements for
the production, preparation and traceability of cashmere fibre,
including ethical claims and supporting information
ISO
ISO 6578:2025
En Vigor
2025-10-24
Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure
ISO
ISO 7176-25:2022/Amd 1:2025
En Vigor
2025-05-16
Wheelchairs — Part 25: Lead-acid batteries and chargers for powered
wheelchairs — Requirements and test methods — Amendment 1: Range of
charging voltage and range of the minimum and maximum rated DC output
voltage for testing
ISO
ISO 8000-118:2025
En Vigor
2025-03-11
Data quality — Part 118: Application of ISO 8000-115 to natural location identifiers
ISO
ISO 5501-1:2024
En Vigor
2024-05-24
Tobacco heating systems — Definitions and standard conditions for
aerosol generation and collection — Part 1: Electrically heated tobacco
products (eHTPs)
ISO
ISO/FDIS 5222-3
En Vigor
2025-10-23
Heat recovery ventilators and energy recovery ventilators — Testing and
calculating methods for performance factor — Part 3: Annual sensible
heating and cooling recovery performance factors of heat recovery
ventilators (HRVs)
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO/TS 22583:2024
En Vigor
2024-09-26
Requirements and recommendations for supervisors and operators of
point-of-care testing (POCT) equipment
ISO
ISO 17244:2025
En Vigor
2025-07-22
Water quality — Determination of the toxicity of water samples on the
embryo-larval development of the Japanese oyster (Magallana gigas) and
the blue mussel (Mytilus edulis or M. galloprovincialis)
ISO
ISO/TS 15638-26:2024
En Vigor
2024-10-16
Intelligent transport systems — Framework for cooperative telematics
applications for regulated vehicles (TARV) — Part 26: Electric vehicle
dynamic charging monitoring
ISO
ISO 29822-2
En Vigor
2026-02-25
Vegetable fats and oils — Determination of the content and relative
amounts of 1,2- and 1,3-diacylglycerols — Part 2: Isolation by solid
phase extraction (SPE)
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 4628-6:2023
En Vigor
2023-10-16
Paints and varnishes — Evaluation of quantity and size of defects, and
of intensity of uniform changes in appearance — Part 6: Assessment of
degree of chalking by tape method
ISO
ISO
ISO 16674:2025
En Vigor
2025-06-10
Corrosion control engineering life cycle of power transmission and
transformation systems — General requirements
ISO
ISO 18400-105
En Vigor
2025-09-02
Soil quality — Sampling — Part 105: Packaging, transport, storage and
preservation of samples
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 24566-3:2025
En Vigor
2025-10-24
Drinking water, wastewater and stormwater systems and services —
Adaptation of water services to climate change impacts — Part 3:
Drinking water services
ISO
ISO 11363-1:2018/Amd 1:2023
En Vigor
2023-08-09
Gas cylinders — 17E and 25E taper threads for connection of valves to
gas cylinders — Part 1: Specifications — Amendment 1
ISO
ISO
ISO 52016-3:2023/Amd 1:2025
En Vigor
2025-09-19
Energy performance of buildings — Energy needs for heating and cooling,
internal temperatures and sensible and latent heat loads — Part 3:
Calculation procedures regarding adaptive building envelope elements —
Amendment 1: Reference control scenarios for adaptive building envelope
elements with dynamic solar shading or chromogenic glazing
ISO
ISO 8536-15:2022/Amd 1:2023
En Vigor
2023-03-01
Infusion equipment for medical use — Part 15: Light-protective infusion
sets for single use — Amendment 1
ISO
ISO
ISO 17109:2022
En Vigor
2022-03-01
Surface chemical analysis — Depth profiling — Method for sputter rate
determination in X-ray photoelectron spectroscopy, Auger electron
spectroscopy and secondary-ion mass spectrometry sputter depth profiling
using single and multi-layer thin films
ISO
ISO 5618-2:2024
En Vigor
2024-04-30
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for GaN crystal surface defects — Part 2: Method for determining
etch pit density
ISO
ISO 9564-5:2025
En Vigor
2025-10-24
Financial services — Personal identification number (PIN) management and
security — Part 5: Methods for the generation, change, and verification
of PINs
ISO
ISO 5459:2024
En Vigor
2024-10-04
Geometrical product specifications (GPS) — Geometrical tolerancing —
Datums and datum systems
ISO
ISO/TS 27790
En Vigor
2025-12-17
Health informatics — Document registry framework
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO
ISO 20658:2023
En Vigor
2023-05-19
Requirements for the collection and transport of samples for medical
laboratory examinations
ISO
ISO 24608:2025
En Vigor
2025-04-25
Essential oil of lavandin super [Lavandula x intermedia Emeric ex
Loisel. ‘super’ (Ex Lavandula angustifolia Mill. x Lavandula latifolia
Medik. ‘super’)]
ISO
ISO 16611:2026
En Vigor
2026-01-27
Plastics piping systems for drainage and sewerage without pressure —
Non-circular pipes and joints made of glass-reinforced thermosetting
plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions,
requirements and tests
ISO
ISO/DIS 18869
En Vigor
2025-10-20
Hydraulic fluid power — Test methods for couplings actuated with or
without tools
ISO
ISO 23873:2025
En Vigor
2025-09-19
Hard coal — Method for the measurement of the swelling properties using
a dilatometer
ISO
ISO 3353-1:2020
En Vigor
2020-12-16
Aerospace — Lead and runout threads — Part 1: Rolled external threads
ISO
ISO 13955:1997/Amd 1:2020
En Vigor
2020-04-20
Plastics pipes and fittings — Crushing decohesion test for polyethylene
(PE) electrofusion assemblies — Amendment 1
ISO
ISO 15042:2017/Amd 1:2020
En Vigor
2020-10-09
Multiple split-system air conditioners and air-to-air heat pumps —
Testing and rating for performance — Amendment 1
ISO
ISO 8157:2022
En Vigor
2022-09-30
Fertilizers, soil conditioners and beneficial substances — Vocabulary
ISO
ISO 7906:2022
En Vigor
2022-10-19
Leather — Tests for colour fastness — General principles of testing
ISO
ISO 21254-1:2025
En Vigor
2025-08-19
Lasers and laser-related equipment — Test methods for laser-induced
damage threshold — Part 1: Definitions and general principles
ISO
ISO 11812:2020/Amd 1:2024
En Vigor
2024-08-08
Small craft — Watertight or quick-draining recesses and cockpits —
Amendment 1
ISO
ISO 18276:2024
En Vigor
2024-07-05
Welding consumables — Tubular cored electrodes for gas-shielded and
non-gas-shielded metal arc welding of high strength steels — Classification
ISO
ISO 18725:2024
En Vigor
2024-06-04
Tourism and related services — Yacht harbours and dry stacks —
Requirements for clean harbours and active biodiversity harbours
ISO
ISO 16826:2025
En Vigor
2025-03-05
Non-destructive testing — Ultrasonic testing — Testing for
discontinuities perpendicular to the surface
ISO
ISO 10513:2025
En Vigor
2025-06-13
Fasteners — Prevailing torque hexagon nuts — High nuts (all metal), with
fine pitch thread
ISO
ISO 50002-1:2025
En Vigor
2025-06-02
Energy audits — Part 1: General requirements with guidance for use
