Filtrar:
ISO
ISO 23401-1:2023
En Vigor
2023-03-03
Dentistry — Chairside denture base relining materials — Part 1: Hard
type materials
ISO
ISO
ISO
ISO 14624-2:2023
En Vigor
2023-10-10
Space systems — Safety and compatibility of materials — Part 2:
Determination of flammability of electrical-wire insulation and
accessory materials
ISO
ISO 5483:2023
En Vigor
2023-08-16
Ships and marine technology — Drain facilities from oil and water tanks
ISO
ISO 9867:2022
En Vigor
2022-10-05
Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method
ISO
ISO
ISO/TS 16843-6:2022
En Vigor
2022-06-21
Health informatics — Categorial structures for representation of
acupuncture — Part 6: Acupuncture effects
ISO
ISO/TS 5594:2022
En Vigor
2022-11-11
Soil and water quality — Guidance and requirements for designing an
interlaboratory trial for validation of biotests
ISO
ISO 11439:2013
En Vigor
2013-05-27
Gas cylinders — High pressure cylinders for the on-board storage of
natural gas as a fuel for automotive vehicles
ISO
ISO
ISO/TS 18621-11:2022
En Vigor
2022-04-05
Graphic technology — Image quality evaluation methods for printed matter
— Part 11: Colour gamut analysis
ISO
ISO
ISO 15686-10:2010
En Vigor
2010-05-31
Buildings and constructed assets — Service life planning — Part 10: When
to assess functional performance
ISO
ISO
ISO 5724:2023
En Vigor
2023-08-15
Jewellery and precious metals — Determination of very high purity gold —
Difference method using ICP-MS
ISO
ISO 3834-1:2021
En Vigor
2021-09-10
Quality requirements for fusion welding of metallic materials — Part 1:
Criteria for the selection of the appropriate level of quality requirements
ISO
ISO
ISO 19160-2:2023
En Vigor
2023-11-10
Addressing — Part 2: Assigning and maintaining addresses for objects in
the physical world
ISO
ISO 3834-4:2021
En Vigor
2021-04-12
Quality requirements for fusion welding of metallic materials — Part 4:
Elementary quality requirements
ISO
ISO 18118:2024
En Vigor
2024-02-28
Surface chemical analysis — Auger electron spectroscopy and X-ray
photoelectron spectroscopy — Guide to the use of experimentally
determined relative sensitivity factors for the quantitative analysis of
homogeneous materials
ISO
ISO
ISO 22974:2023
En Vigor
2023-07-11
Petroleum and natural gas industry — Pipeline transportation systems —
Pipeline integrity assessment specification
ISO
ISO
ISO 16000-43:2025
En Vigor
2025-02-07
Indoor air — Part 43: Standard method for assessing the reduction rate
of culturable airborne fungi by air purifiers using a test chamber
ISO
ISO 3517:2012
En Vigor
2012-07-31
Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link,
syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
ISO
ISO 3272-3:2001
En Vigor
2001-11-29
Microfilming of technical drawings and other drawing office documents —
Part 3: Aperture card for 35 mm microfilm
ISO
ISO 16900-8:2015
En Vigor
2015-05-08
Respiratory protective devices — Methods of test and test equipment —
Part 8: Measurement of RPD air flow rates of assisted filtering RPD
ISO
ISO 14648-2:2001
En Vigor
2001-12-13
Micrographics — Quality control of COM recorders that generate images
using a single internal display system — Part 2: Method of use
ISO
ISO 15355:1999
En Vigor
1999-12-16
Steel and iron — Determination of chromium content — Indirect titration method
ISO
ISO 11093-6:2005
En Vigor
2005-04-29
Paper and board — Testing of cores — Part 6: Determination of bending
strength by the three-point method
ISO
ISO/TS 10303-1314:2008
En Vigor
2008-12-15
Industrial automation systems and integration — Product data
representation and exchange — Part 1314: Application module: Mechanical
design shaded presentation
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 11689:1996/Cor 1:2007
En Vigor
2007-10-03
Acoustics — Procedure for the comparison of noise-emission data for
machinery and equipment — Technical Corrigendum 1
ISO
ISO 3225:1998
En Vigor
1998-11-26
Aerospace — Nuts, anchor, self-locking, fixed, two lug, reduced series,
with counterbore, with MJ threads, classifications: 1 100 MPa (at
ambient temperature)/235 degrees C, 1 100 MPa (at ambient
temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425
degrees C — Dimensions
IEC
ISO 1113:1979
En Vigor
1979-02-01
Information processing - Representation of the 7- bit coded character
set on punched tape
ISO
ISO 7626-1:2011
En Vigor
2011-07-15
Mechanical vibration and shock — Experimental determination of
mechanical mobility — Part 1: Basic terms and definitions, and
transducer specifications
ISO
ISO/DIS 20770-6
En Vigor
2025-10-24
Drilling and foundation machinery — Safety — Part 6: Interchangeable equipment
ISO
ISO 17386:2023
En Vigor
2023-05-26
Intelligent transport systems — Manoeuvring aids for low-speed operation
(MALSO) — Performance requirements and test procedures
ISO
ISO
ISO 5667-5:2006
En Vigor
2006-04-06
Water quality — Sampling — Part 5: Guidance on sampling of drinking
water from treatment works and piped distribution systems
ISO
ISO 1043-1:2011
En Vigor
2011-11-09
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and
their special characteristics
ISO
ISO/FDIS 11612
En Vigor
2025-05-19
Protective clothing — Clothing to protect against heat and flame —
Minimum performance requirements
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO
ISO 8056-3:1987
En Vigor
1987-06-25
Aircraft — Nickel-chromium and nickel-aluminium thermocouple extension
cables — Part 3: Crimp-type ring terminal ends — Dimensions
ISO
ISO 5379:2013
En Vigor
2013-08-19
Starches and derived products — Determination of sulfur dioxide content
— Acidimetric method and nephelometric method
ISO
ISO 2177:2003
En Vigor
2003-03-19
Metallic coatings — Measurement of coating thickness — Coulometric
method by anodic dissolution
ISO
ISO 8316:1987
En Vigor
1987-09-24
Measurement of liquid flow in closed conduits — Method by collection of
the liquid in a volumetric tank
ISO
ISO 11798:2023
En Vigor
2023-06-02
Information and documentation — Permanence and durability of writing,
printing and copying on paper — Requirements and test methods
ISO
ISO 3325:2026
En Vigor
2026-01-16
Sintered metal materials, excluding hardmetals — Determination of
transverse rupture strength
ISO
ISO/DIS 21809-5
En Vigor
2025-04-10
Oil and gas industries including lower carbon energy — External coatings
for buried or submerged pipelines used in pipeline transportation
systems — Part 5: External concrete coatings
ISO
ISO 16840-11:2022
En Vigor
2022-05-12
Wheelchair seating — Part 11: Determination of dissipation
characteristics of sensible perspiration into seat cushions
ISO
ISO 8727:1997
En Vigor
1997-07-31
Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems
ISO
ISO 16140-2:2016/Amd 1:2024
En Vigor
2024-09-03
Microbiology of the food chain — Method validation — Part 2: Protocol
for the validation of alternative (proprietary) methods against a
reference method — Amendment 1: Revision of qualitative method
comparison study data evaluation, relative level of detection
calculations in the interlaboratory study, calculation and
interpretation of the relative trueness study, and inclusion of a
commercial sterility testing protocol for specific products
ISO
ISO 12653-2:2000
En Vigor
2000-12-14
Electronic imaging — Test target for the black-and-white scanning of
office documents — Part 2: Method of use
ISO
ISO/DIS 21762
En Vigor
2025-12-10
Medical devices utilizing non-viable human materials — Risk management
ISO
ISO 787-24:1985
En Vigor
1985-12-19
General methods of test for pigments and extenders — Part 24:
Determination of relative tinting strength of coloured pigments and
relative scattering power of white pigments — Photometric methods
ISO
ISO 18905:2002
En Vigor
2002-10-22
Imaging materials — Ammonia-processed diazo photographic film —
Specifications for stability
ISO
ISO 9120:1997
En Vigor
1997-11-13
Petroleum and related products — Determination of air-release properties
of steam turbine and other oils — Impinger method
ISO
ISO 8122:2003
En Vigor
2003-06-03
Textile machinery — Knitting machines — Number of needles for circular
knitting machines of large nominal diameter
ISO
ISO 10303-225:1999
En Vigor
1999-12-16
Industrial automation systems and integration — Product data
representation and exchange — Part 225: Application protocol: Building
elements using explicit shape representation
ISO
