Filtrar:
SAE
SAE AMS6543H
En Vigor
2026-05-07
Steel, Bars and Forgings and Forging Stock, 2.0Cr - 10Ni - 8.0Co - 1.0Mo
(0.10 - 0.14C) (HY-180), Double Vacuum Melted, Solution Heat Treated,
Marage Hardenable
SAE
SAE
SAE
SAE AS60491/4
En Vigor
2026-04-29
SLEEVE, CHAFE-PROTECTION, HIGH ABRASION EXPANDABLE (-55 TO +200 °C)
SAE
SAE AS3319F
En Vigor
2026-04-15
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS
S66286), .1900-24 UNJC X .1900-32 UNJF
SAE
SAE AS33699C
En Vigor
2026-04-14
INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7 (FOR AS81703 CONNECTORS)
SAE
SAE AS3175C
En Vigor
2026-04-26
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL
SHANK, AMS5643 (UNS S17400), 140 KSI, 2500-28 UNJF-3A
SAE
SAE J2912_202604
En Vigor
2026-04-17
Performance Requirements for R-134a and R-1234yf Refrigerant Diagnostic
Identifiers (RDI) for Use with Mobile Air Conditioning Systems
SAE
SAE AMS4251D
En Vigor
2026-05-06
Aluminum Alloy Sheet, 2.7Cu - 2.2Li - 0.12Zr (2090-T83), Solution Heat
Treated, Cold Worked, and Precipitation Heat Treated
SAE
SAE AS3658B
En Vigor
2026-05-04
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE
SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
SAE
SAE AMS5766G
En Vigor
2026-05-01
Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Forging Stock,
21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat Treated
SAE
SAE AS8538
En Vigor
2026-05-04
RECESS, INTERNAL, TORX® PARALOBE® DRIVE, DIMENSIONS OF RECESS AND GAGE
SAE
SAE AMS4214L
En Vigor
2026-04-25
Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71),
Solution Heat Treated and Overaged
SAE
SAE AS39029/71B
En Vigor
2026-04-14
CONTACTS, ELECTRICAL CONNECTOR, PIN, REMOVABLE, SOLDERLESS WRAPPOST
TERMINATION (FOR MIL-DTL-38999 SERIES I, II, III, AND IV, MIL-DTL-24308,
MIL-DTL-83733, AND MIL-DTL-55302/69 CONNECTORS)
SAE
SAE
SAE AMS6953B
En Vigor
2026-04-25
Titanium Alloy Sheet, 6Al - 4Sn - 3Nb - 0.5Mo - 0.3Si, Duplex Annealed
