Filtrar:
SAE
SAE ARP690A
En Vigor
2026-05-05
Standard Exposed Junction Thermocouple for Controlled Conduction Errors
in Measurement of Air or Exhaust Gas Temperature
SAE
SAE J1739_202605
En Vigor
2026-05-07
Potential Failure Mode and Effects Analysis (FMEA) Including Design
FMEA, Supplemental FMEA-MSR, and Process FMEA
SAE
SAE AMS5667R
En Vigor
2026-04-12
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and
Stock for Forgings, Rings and Heading, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -
0.70Al - 7.0Fe (Inconel® X750), Equalized, Precipitation Hardenable
SAE
SAE AS9725A
En Vigor
2026-05-07
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE
SHANK, UNS N07001, 165 KSI, .3125-24 UNJF-3A
SAE
SAE AS81914/5D
En Vigor
2026-04-26
TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, ETHYLENE
TETRAFLUOROETHYLENE (ETFE), CLOSE CONVOLUTION
SAE
SAE J2642_201707
En Vigor
2017-07-12
Recommended Practice for Developing Specifications for Automotive
Thermoplastic Materials
SAE
SAE AS3544A
En Vigor
2026-05-05
STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 KSI/1200 °F HEAVY-DUTY,
SELF-BROACHING KEYS
SAE
SAE AS3110B
En Vigor
2026-05-01
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731
(UNS S66286), .3750-24 UNJF-3A
SAE
SAE AS3113B
En Vigor
2026-05-01
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731
(UNS S66286), .5625-18 UNJF-3A
SAE
SAE
SAE AMS6885/3
En Vigor
2026-05-07
Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing
Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape
Epoxy Repair Prepreg
SAE
SAE J1691_202604
En Vigor
2026-04-12
Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
SAE
SAE AMS5593J
En Vigor
2026-04-12
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate,
45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, (RA333®), Solution Heat Treated
SAE
SAE AMS4241F
En Vigor
2026-04-25
Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6),
Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) Controlled
SAE
SAE AS81914/6D
En Vigor
2026-05-04
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL ETHYLENE
TETRAFLUOROETHYLENE (ETFE), STANDARD CONVOLUTION
SAE
