Filtrar:
SAE
SAE AS33704A
En Vigor
2025-06-30
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SHELL SIZE 61 (FOR AS81703 CONNECTORS)
SAE
SAE J2570_202506
En Vigor
2025-06-30
Performance Specifications for Anthropomorphic Test Device Transducers
SAE
SAE AMS3052B
En Vigor
2025-06-30
Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened
SAE
SAE AMS1428M
En Vigor
2025-06-27
Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE
Types II, III, and IV
SAE
SAE AMS1385A
En Vigor
2025-06-23
Compound, Hot Carbon and Paint Remover Aircraft Turbine Engine Components
SAE
SAE AMS1379A
En Vigor
2025-06-23
Compound, Alkaline Rust Remover Aircraft Turbine Engine Components
SAE
SAE
SAE ARP4712B
En Vigor
2025-06-17
Portable Cabin Fire Extinguishers Transport Aircraft
SAE
SAE AMS4870G
En Vigor
2025-06-17
Aluminum Bronze, Centrifugal and Chill Castings, 85Cu - 11Al - 3.6Fe, As Cast
SAE
SAE J3136_202506
En Vigor
2025-06-17
Low-Temperature Coolant Circuit Nomenclature and Applications
SAE
SAE ARP6128A
En Vigor
2025-06-17
Unmanned Systems Terminology Based on the ALFUS Framework
SAE
SAE AS4395C
En Vigor
2025-06-17
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE
SAE AMS4437G
En Vigor
2025-06-17
Magnesium Alloy Castings, Sand, 8.7Al - 0.70Zn (AZ91C-T6), Solution Heat
Treated and Aged
SAE
SAE AMS2466D
En Vigor
2025-06-17
Hard Anodic Coating of Magnesium Alloys Alkaline, Non-Chromate Type,
High Voltage
SAE
SAE AMS4153N
En Vigor
2025-06-17
Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6)
Solution and Precipitation Heat Treated
SAE
SAE ARP5535B
En Vigor
2025-06-17
Observers for Laser Safety in the Navigable Airspace
SAE
SAE AMS4842G
En Vigor
2025-06-17
Castings, Leaded Bronze, Sand and Centrifugal, 80Cu - 10Sn - 9.5Pb, As Cast
SAE
SAE ARP1232D
En Vigor
2025-06-17
Gland Design Criteria and Dimensions for Static Radial O-Ring Seal
Applications Without Anti-Extrusion Devices Specifically for Engine and
Engine Control Systems
SAE
SAE AMS4881E
En Vigor
2025-06-17
Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous
Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed
SAE
SAE AS4396C
En Vigor
2025-06-17
FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD
