Filtrar:
SAE
SAE AS50861/1B
En Vigor
2025-08-19
WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, POLYAMIDE JACKET,
TIN-COATED COPPER CONDUCTOR, 600-VOLT, 105 °C
SAE
SAE ARP5602
En Vigor
2025-10-23
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education
SAE
SAE AMS4482B
En Vigor
2025-08-19
Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg
(205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat Treated
SAE
SAE
SAE AMS5385J
En Vigor
2025-07-18
Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co -
27Cr - 2.8Ni - 5.5Mo (Stellite® 21) As-Cast
SAE
SAE ARP6807A
En Vigor
2025-10-02
Guide for Identification of Terminal Lugs in Electrical Wiring
Interconnect Systems (EWIS)
SAE
SAE AMS5501G
En Vigor
2025-07-09
Steel, Corrosion-Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304)
Cold Rolled, 125 ksi (862 MPa) Tensile Strength
SAE
SAE AMS5652K
En Vigor
2025-09-25
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical
Tubing, Rings and Stock for Forgings and Rings, 25Cr - 20Ni - 2.0Si
(314), Solution Heat Treated
SAE
SAE AMS6907D
En Vigor
2025-10-02
Titanium Alloy Bars and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo,
Duplex Annealed
SAE
SAE AS5671A
En Vigor
2025-06-17
Design and Performance Criteria: Interior Passenger Stairways on
Transport Category Airplanes
SAE
SAE
SAE ARP1234F
En Vigor
2025-05-27
Static Axial O-Ring Seal Applications Without Anti-Extrusion Devices for
Engine and Engine Control Systems
SAE
SAE AMS1385A
En Vigor
2025-06-23
Compound, Hot Carbon and Paint Remover Aircraft Turbine Engine Components
SAE
SAE
SAE AMS5911D
En Vigor
2025-06-30
Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold
Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
SAE
SAE J2417_202510
En Vigor
2025-10-15
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain
Forestry Equipment
SAE
SAE AMS6477E
En Vigor
2025-09-10
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr (0.90
- 1.03C), For Bearing Applications
SAE
SAE AS5506/3
En Vigor
2025-10-13
Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex
SAE
SAE AMS5629/H950A
En Vigor
2025-09-18
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions
13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode
Melted Solution Heat Treated, Precipitation Hardened (H950)
SAE
SAE AMS7273D
En Vigor
2025-10-24
Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant
For Seals In Fuel Systems and Specific Engine Oil Systems
