Filtrar:
SAE
SAE AMS5652K
En Vigor
2025-09-25
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical
Tubing, Rings and Stock for Forgings and Rings, 25Cr - 20Ni - 2.0Si
(314), Solution Heat Treated
SAE
SAE AMS6907D
En Vigor
2025-10-02
Titanium Alloy Bars and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo,
Duplex Annealed
SAE
SAE AS5671A
En Vigor
2025-06-17
Design and Performance Criteria: Interior Passenger Stairways on
Transport Category Airplanes
SAE
SAE
SAE ARP1234F
En Vigor
2025-05-27
Static Axial O-Ring Seal Applications Without Anti-Extrusion Devices for
Engine and Engine Control Systems
SAE
SAE AMS1385A
En Vigor
2025-06-23
Compound, Hot Carbon and Paint Remover Aircraft Turbine Engine Components
SAE
SAE
SAE AMS5911D
En Vigor
2025-06-30
Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (304) Cold
Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
SAE
SAE J2417_202510
En Vigor
2025-10-15
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain
Forestry Equipment
SAE
SAE AMS6477E
En Vigor
2025-09-10
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr (0.90
- 1.03C), For Bearing Applications
SAE
SAE AS5506/3
En Vigor
2025-10-13
Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex
SAE
SAE AMS5629/H950A
En Vigor
2025-09-18
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions
13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode
Melted Solution Heat Treated, Precipitation Hardened (H950)
SAE
SAE AMS7273D
En Vigor
2025-10-24
Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant
For Seals In Fuel Systems and Specific Engine Oil Systems
SAE
SAE AMS4880E
En Vigor
2025-09-10
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings, 81.5Cu
- 10.3Al - 5.0Ni - 2.8Fe, Quench Hardened and Temper Annealed (TQ50)
SAE
SAE AMS6517C
En Vigor
2025-08-01
Steel, Bars, Forgings and Forging Stock 3.5Cr - 9.5Ni - 18Co - 1.1Mo
(0.13 - 0.17C) (Ferrium® C61) Premium Aircraft Quality, Double Vacuum
Melted, Normalized, Annealed
SAE
SAE AMS4459C
En Vigor
2025-07-22
Aluminum Alloy, Extrusion 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr
(2099-T81) Solution Heat Treated, Stress Relieved by Stretching 1 to 3%
and Aged
SAE
SAE
SAE
SAE AMS5950E
En Vigor
2025-10-15
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni -
19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718SPF),
Vacuum Induction and Consumable Electrode Remelted, Solution Heat
Treated, Precipitation Hardenable
SAE
SAE AS1914E
En Vigor
2025-07-22
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000
PSI, LIGHTWEIGHT, BEAM SEAL, 90 TO 90°
