Filtrar:
SAE
SAE AS85049/11E
En Vigor
2025-10-20
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE
SEALING, STRAIGHT, CATEGORY 1A (FOR AS50151 CRIMP, AS95234,
MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
SAE
SAE AS5259/6C
En Vigor
2025-10-20
CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES
SAE
SAE AS81824/11A
En Vigor
2025-10-20
SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NI/CU, INSULATED, ENVIRONMENT
RESISTANT, CLASS 1, 200 °C MAX, 1X1 SEALANT OPENING
SAE
SAE
SAE AS85049/10D
En Vigor
2025-10-20
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE
SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP,
AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723
SERIES III CONNECTORS)
SAE
SAE AMS6422M
En Vigor
2025-10-20
Steel, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.80Cr -
0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (98BV40 Mod), Aircraft Quality
SAE
SAE AMS4596C
En Vigor
2025-10-20
Copper Nickel Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution
Annealed and Spinodal Hardened (TX02, formerly TX00)
SAE
SAE AMS5854D
En Vigor
2025-10-16
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings,
Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr -
8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or
Vacuum Induction Melted, Solution Heat Treated
SAE
SAE AS8056A
En Vigor
2025-10-16
Minimum Design and Performance of Airplane Galley In-Flight Carts,
Containers, and Associated Components
SAE
SAE
SAE AMS4461C
En Vigor
2025-10-16
Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad
2024-O, Sheet and Plate), Annealed; or when specified, “As Fabricated” (2024-F)
SAE
SAE
SAE J2417_202510
En Vigor
2025-10-15
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain
Forestry Equipment
SAE
SAE AMS2242H
En Vigor
2025-10-15
Tolerances, Corrosion- and Heat-Resistant Steel, Iron Alloy, Titanium,
and Titanium Alloy Sheet, Strip, and Plate
SAE
SAE J1131_202510
En Vigor
2025-10-15
Performance Requirements for SAE J844 Nonmetallic Air Brake Tubing and
SAE J246 Compression Fitting Assemblies Used in Vehicular Air Brake Systems
SAE
SAE AMS5696F
En Vigor
2025-10-15
Steel, Corrosion- and Heat-Resistant, Welding Wire, 19Cr - 12.5Ni -
2.5Mo (316L)
SAE
SAE AMS5950E
En Vigor
2025-10-15
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet and Strip, 52.5Ni -
19Cr - 3.0Mo - 5.0Cb (Nb) - 0.90Ti - 0.50Al - 18Fe (Inconel® 718SPF),
Vacuum Induction and Consumable Electrode Remelted, Solution Heat
Treated, Precipitation Hardenable
SAE
SAE AMS5508H
En Vigor
2025-10-15
Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate, 13Cr -
2.0Ni - 3.0W (Greek Ascoloy), Annealed
SAE
SAE AIR5784A
En Vigor
2025-10-15
Literature on Gas Turbine Engine Lubricant Composition and Degradation
Relevant to Cabin Air Quality
SAE
SAE AS5506/3
En Vigor
2025-10-13
Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex
