¿Quieres consultar siempre las normas más actualizadas?
Suscríbete a para tener acceso a las últimas versiones de las normas
Filtrar:
EN
EN ISO 9073-8:2025
En Vigor
2025-10-15
Nonwovens - Test methods - Part 8: Determination of liquid
strike-through time (simulated urine) for nonwoven coverstocks (ISO 9073-8:2025)
EN
EN ISO 13680:2025
En Vigor
2025-10-15
Oil and gas industries including lower carbon energy -
Corrosion-resistant alloy seamless products for use as casing, tubing,
coupling stock and accessory material - Technical delivery conditions
(ISO 13680:2024)
EN
EN 16616:2022+A1:2025
En Vigor
2025-10-15
Chemical disinfectants and antiseptics - Chemical-thermal textile
disinfection - Test method and requirements (phase 2, step 2)
EN
CWA 18273:2025
En Vigor
2025-10-15
Good practice recommendations for aquaculture hatchery production of Low
Trophic Species
EN
EN 17213:2020+A1:2025
En Vigor
2025-10-15
Windows and doors - Environmental Product Declarations - Product
category rules complementary to EN 15804 for windows and pedestrian doorsets
EN
EN IEC 60335-2-58:2025/A11:2025
En Vigor
2025-10-10
Household and similar electrical appliances - Safety - Part 2-58:
Particular requirements for commercial electric dishwashing machines
EN
EN IEC 60335-2-58:2025
En Vigor
2025-10-10
Household and similar electrical appliances - Safety - Part 2-58:
Particular requirements for commercial electric dishwashing machines
EN
EN IEC 60794-1-218:2025
En Vigor
2025-10-10
Optical fibre cables - Part 1-218: Generic specification - Basic optical
cable test procedures - Environmental test methods - Mid-span
temperature cycling test for exposed optical units, Method F18
EN
EN 15416-1:2025
En Vigor
2025-10-08
Adhesives for load bearing timber structures other than phenolic and
aminoplastic - Test methods - Part 1: Long-term tension load test
perpendicular to the bond line at varying climate conditions with
specimens perpendicular to the glue line (Glass house test)
EN
EN 1508:2025
En Vigor
2025-10-08
Water supply - Requirements for systems and components for the storage
of water
EN
EN 13476-1:2025
En Vigor
2025-10-08
Plastics piping systems for non-pressure underground drains and sewers -
Structured-wall piping systems of unplasticized poly(vinyl chloride)
(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General
requirements and performance characteristics
EN
EN ISO 9806:2025
En Vigor
2025-10-08
Solar energy - Solar thermal collectors - Test methods (ISO 9806:2025)
EN
EN 13476-3:2025
En Vigor
2025-10-08
Plastics piping systems for non-pressure underground drains and sewers -
Structured-wall piping systems of unplasticized poly(vinyl chloride)
(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3:
Specifications for pipes and fittings with smooth internal and profiled
external surface and the system, Type B
EN
EN ISO 5577:2025
En Vigor
2025-10-08
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2025)
EN
EN 15416-4:2025
En Vigor
2025-10-08
Adhesives for load bearing timber structures other than phenolic and
aminoplastic - Test methods - Part 4: Determination of open assembly
time under referenced conditions
EN
EN 13476-2:2025
En Vigor
2025-10-08
Plastics piping systems for non-pressure underground drains and sewers -
Structured-wall piping systems of unplasticized poly(vinyl chloride)
(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2:
Specifications for pipes and fittings with smooth internal and external
surface and the system, Type A
EN
EN ISO 3210:2025
En Vigor
2025-10-08
Anodizing of aluminium and its alloys - Assessment of quality of sealed
anodic oxidation coatings by measurement of the loss of mass after
immersion in acid solution(s) (ISO 3210:2025)
EN
EN 15269-4:2025
En Vigor
2025-10-08
Extended application of test results for fire resistance and/or smoke
control for door, shutter and openable window assemblies, including
their elements of building hardware - Part 4: Fire resistance of hinged
and pivoted glass doorsets'
EN
EN 1555-4:2025
En Vigor
2025-10-08
Plastics piping systems for the supply of gaseous fuels - Polyethylene
(PE) - Part 4: Valves
EN
EN ISO 18724:2025
En Vigor
2025-10-08
Water quality - Determination of dissolved chromium(VI) in water -
Photometric method (ISO 18724:2025)
EN
EN 1555-3:2025
En Vigor
2025-10-08
Plastics piping systems for the supply of gaseous fuels - Polyethylene
(PE) - Part 3: Fittings
EN
EN 15416-5:2025
En Vigor
2025-10-08
Adhesives for load bearing timber structures other than phenolic and
aminoplastic - Test methods - Part 5: Determination of minimum pressing
time under referenced conditions
EN
EN ISO 16486-4:2025/A11:2025
En Vigor
2025-10-08
Plastics piping systems for the supply of gaseous fuels - Unplasticized
polyamide (PA-U) piping systems with fusion jointing and mechanical
jointing - Part 4: Valves
EN
EN 1555-1:2025
En Vigor
2025-10-08
Plastics piping systems for the supply of gaseous fuels - Polyethylene
(PE) - Part 1: General
EN
EN 15416-3:2025
En Vigor
2025-10-08
Adhesives for load bearing timber structures other than phenolic and
aminoplastic - Test methods - Part 3: Creep deformation test at cyclic
climate conditions with specimens loaded in bending shear
EN
EN 12392:2025
En Vigor
2025-10-08
Aluminium and aluminium alloys - Wrought products and cast products -
Special requirements for products intended for the production of
pressure equipment
EN
EN 1555-2:2025
En Vigor
2025-10-08
Plastics piping systems for the supply of gaseous fuels - Polyethylene
(PE) - Part 2: Pipes
EN
CEN/TS 13476-4:2025
En Vigor
2025-10-08
Plastics piping systems for non-pressure underground drains and sewers -
Structured-wall piping systems of unplasticized poly(vinyl chloride)
(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment
of conformity
EN
CEN/TS 18173:2025
En Vigor
2025-10-08
Hydrogen applications - Material compatibility evaluation and
qualification - Equipment used in commercial, industrial installations
including gas burners, gas burning appliances and fuel gas infrastructures
EN
EN 18032:2025
En Vigor
2025-10-08
Foodstuff - Quick Method for the Analysis of Multiple Highly Polar
Pesticides and their Metabolites in Foodstuff Involving Extraction with
Acidified Methanol and Measurement by LC- or IC-MS/MS (QuPPe-Method)
EN
EN 1993-1-14:2025
En Vigor
2025-10-08
Eurocode 3 - Design of steel structures - Part 1-14: Design assisted by
finite element analysis
EN
EN IEC 63208:2025
En Vigor
2025-10-03
Low-voltage switchgear and controlgear and their assemblies - Security requirements
EN
EN IEC 60794-1-214:2025
En Vigor
2025-10-03
Optical fibre cables - Part 1-214: Generic specification - Basic optical
cable test procedures - Environmental test methods - Cable UV resistance
test, Method F14
EN
EN 61000-4-34:2007/A2:2025
En Vigor
2025-10-03
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement
techniques - Voltage dips, short interruptions and voltage variations
immunity tests for equipment with mains current more than 16 A per phase
EN
EN 13763-24:2025
En Vigor
2025-10-01
Explosives for civil uses - Detonators and detonating cord relays - Part
24: Verification of electrical non-conductivity of shock tubes
EN
EN 16585-1:2025
En Vigor
2025-10-01
Railway applications - Design for PRM use - Equipment and components
onboard rolling stock - Part 1: Toilets
EN
EN 13630-6:2025
En Vigor
2025-10-01
Explosives for civil uses - Detonating cords and safety fuses - Part 6:
Verification of resistance to tension of detonating cords
EN
EN 13938-5:2025
En Vigor
2025-10-01
Explosives for civil uses - Propellants and rocket propellants - Part 5:
Verification of safe functioning of solid rocket propellants used in
small rocket motors
EN
EN ISO 9185:2025
En Vigor
2025-10-01
Protective clothing - Assessment of resistance of materials to molten
metal splash (ISO 9185:2025)
EN
CEN/TS 1401-2:2025
En Vigor
2025-10-01
Plastics piping systems for non-pressure underground drainage and
sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance
for the assessment of conformity
