¿Quieres consultar siempre las normas más actualizadas?
Suscríbete a para tener acceso a las últimas versiones de las normas
Filtrar:
EN
EN 18025:2025
En Vigor
2025-09-03
Water quality - Guidance standard on a strategic approach to river restoration
EN
EN ISO 16484-4:2025
En Vigor
2025-09-03
Building automation and control systems (BACS) - Part 4: Control
applications (ISO 16484-4:2025)
EN
EN 13892-10:2025
En Vigor
2025-09-03
Method of test for screed materials - Part 10: Determination of moisture
content - Calcium Carbide Method
EN
EN 13892-9:2025
En Vigor
2025-09-03
Methods of test for screed materials - Part 9: Dimensional stability
EN
EN
EN IEC 60794-1-133:2025
En Vigor
2025-08-29
Optical fibre cables - Part 1-133: Generic specifications - Basic
optical cable test procedures - Mechanical test methods - Multiple cable
coiling and uncoiling performance, Method E33
EN
EN IEC 63402-1:2025
En Vigor
2025-08-29
Energy efficiency - Customer energy management systems - Part 1: General
requirements and architecture
EN
EN ISO 10993-23:2021/A1:2025
En Vigor
2025-08-27
Biological evaluation of medical devices - Part 23: Tests for irritation
- Amendment 1: Additional in vitro reconstructed human epidermis models
(ISO 10993-23:2021/Amd 1:2025)
EN
EN ISO 17268-1:2025
En Vigor
2025-08-27
Gaseous hydrogen land vehicle refuelling connection devices - Part 1:
Flow capacities up to and including 120 g/s (ISO 17268-1:2025)
EN
EN ISO 23908:2025
En Vigor
2025-08-27
Sharps injury protection - Sharps protection mechanisms for single-use
needles, introducers for catheters and needles used for blood testing,
monitoring, sampling and medical substance administration - Requirements
and test methods (ISO 23908:2024)
EN
EN 455-5:2025
En Vigor
2025-08-27
Medical gloves for single use - Part 5: Extractable chemical residues
EN
EN ISO 14405-1:2025
En Vigor
2025-08-27
Geometrical product specifications (GPS) - Dimensional tolerancing -
Part 1: Linear sizes (ISO 14405-1:2025)
EN
EN ISO 19932-1:2025
En Vigor
2025-08-27
Equipment for crop protection - Knapsack sprayers - Part 1: Safety and
environmental requirements (ISO 19932-1:2025)
EN
EN ISO 19932-3:2025
En Vigor
2025-08-27
Equipment for crop protection - Knapsack sprayers - Part 3: Inspection
of knapsack sprayers in use (ISO 19932-3:2025)
EN
EN ISO 19932-2:2025
En Vigor
2025-08-27
Equipment for crop protection - Knapsack sprayers - Part 2: Test methods
(ISO 19932-2:2025)
EN
EN ISO 12870:2025
En Vigor
2025-08-27
Ophthalmic optics - Spectacle frames - Requirements and test methods
(ISO 12870:2024)
EN
EN 13060:2025
En Vigor
2025-08-27
Sterilizers for medical purposes - Small steam sterilizers -
Requirements and testing
EN
EN ISO/ASTM 52953:2025
En Vigor
2025-08-27
Additive manufacturing for metals - General principles - Registration of
data acquired from process monitoring and for quality control (ISO/ASTM 52953:2025)
EN
EN ISO 13802:2025
En Vigor
2025-08-27
Plastics - Verification of pendulum impact-testing machines - Charpy,
Izod and tensile impact-testing (ISO 13802:2025)
EN
EN ISO 16140-4:2020/A2:2025
En Vigor
2025-08-27
Microbiology of the food chain - Method validation - Part 4: Protocol
for method validation in a single laboratory - Amendment 2: Protocol for
single-laboratory validation of identification methods of microorganisms
(ISO 16140-4:2020/Amd 2:2025)
EN
EN ISO 8754:2025
En Vigor
2025-08-27
Petroleum products - Determination of sulfur content - Energy-dispersive
X-ray fluorescence spectrometry (ISO 8754:2025)
EN
EN ISO 16140-3:2021/A1:2025
En Vigor
2025-08-27
Microbiology of the food chain - Method validation - Part 3: Protocol
for the verification of reference methods and validated alternative
methods in a single laboratory - Amendment 1: Protocol for verification
of validated identification methods of microorganisms (ISO
16140-3:2021/Amd 1:2025)
EN
EN 2714-013:2025
En Vigor
2025-08-27
Aerospace series - Cables, electrical, single and multicore for general
purpose - Operating temperatures between - 55 °C and 260 °C - Part 013:
DR family, screened (spiral) and jacketed, UV laser printable - Product standard
EN
EN 2267-002:2025
En Vigor
2025-08-27
Aerospace series - Cables, electrical, for general purpose - Operating
temperatures between -55 °C and 260 °C - Part 002: General
EN
EN
EN IEC 61921:2025
En Vigor
2025-08-22
Power capacitors - Low-voltage power factor correction banks
EN
EN 13616-1:2025
En Vigor
2025-08-20
Overfill prevention devices for static tanks for liquid fuels - Part 1:
Overfill prevention devices with closure device
EN
EN 18109:2025
En Vigor
2025-08-20
Plastics - Agricultural plastic products - Installation, use, removal,
sorting, collection, preparation for recycling and design for recycling guidelines
EN
EN 17671:2025
En Vigor
2025-08-20
Heating systems and water-based cooling systems in buildings - Design
for water-based cooling systems
EN
EN ISO 19152-5:2025
En Vigor
2025-08-20
Geographic information - Land Administration Domain Model (LADM) - Part
5: Spatial plan information (ISO 19152-5:2025)
EN
EN 18065:2025
En Vigor
2025-08-20
Plastics - Recycled plastics - Classification of recycled plastics based
on Data Quality Levels for use and (digital) trading
EN
EN 13655:2025
En Vigor
2025-08-20
Plastics - Thermoplastic mulch films recoverable after use, for use in
agriculture and horticulture
EN
EN ISO 8501-3:2025
En Vigor
2025-08-20
Preparation of steel substrates before application of paints and related
products - Visual assessment of surface cleanliness - Part 3:
Preparation grades of welds, edges and other areas with surface
imperfections (ISO 8501-3:2025)
EN
EN 14204:2025
En Vigor
2025-08-20
Chemical disinfectants and antiseptics - Quantitative suspension test
for the evaluation of mycobactericidal activity of chemical
disinfectants and antiseptics used in the veterinary area - (phase 2,
step 1)
EN
EN 13207:2025
En Vigor
2025-08-20
Plastics - Thermoplastic silage films and tubes for use in agriculture
EN
EN 13206:2025
En Vigor
2025-08-20
Plastics - Thermoplastic covering films for use in agriculture and horticulture
EN
EN ISO 877-1:2025
En Vigor
2025-08-20
Plastics - Methods of exposure to solar radiation - Part 1: General
guidance (ISO 877-1:2025)
EN
EN 4604-006:2025
En Vigor
2025-08-20
Aerospace series - Cable, electrical, for signal transmission - Part
006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard
EN
EN
EN 3155-016:2025
En Vigor
2025-08-20
Aerospace series - Electrical contacts used in elements of connection -
Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
EN
EN 4604-008:2025
En Vigor
2025-08-20
Aerospace series - Cable, electrical, for signal transmission - Part
008: Cable, coaxial, 50 ohms, 200 °C, Type WD - Product standard
EN
EN 3155-004:2025
En Vigor
2025-08-20
Aerospace series - Electrical contacts used in elements of connection -
Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard
EN
EN 4604-003:2025
En Vigor
2025-08-20
Aerospace series - Cable, electrical, for signal transmission - Part
003: Cable, coaxial, 50 ohms, 200 °C, type WZ - Product standard
EN
EN 4604-007:2025
En Vigor
2025-08-20
Aerospace series - Cable, electrical, for signal transmission - Part
007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard
EN
EN IEC 61340-4-6:2025
En Vigor
2025-08-15
Electrostatics - Part 4-6: Standard test methods for specific
applications - Wrist straps
EN
EN IEC 62271-103:2023/AC:2025-08
En Vigor
2025-08-15
High-voltage switchgear and controlgear - Part 103: Alternating current
switches for rated voltages above 1 kV up to and including 52 kV
EN
EN 13501-3:2025
En Vigor
2025-08-13
Fire classification of construction products and building elements -
Part 3: Classification using data from fire resistance tests on products
and elements used in building service installations: fire resisting
ventilation ducts and fire dampers and/or power, control and
communication cables
EN
CEN/TR 15221-9:2025
En Vigor
2025-08-13
Facility Management - Part 9: Study of area and space measurement
standards and guidelines used in Europe
EN
EN
EN ISO 75-3:2025
En Vigor
2025-08-13
Plastics - Determination of temperature of deflection under load - Part
3: High-strength thermosetting laminates and long-fibre-reinforced
plastics (ISO 75-3:2025)
EN
EN 14331:2025
En Vigor
2025-08-13
Liquid petroleum products - Separation and characterisation of fatty
acid methyl esters (FAME) from middle distillate fuels - Liquid
chromatography (LC)/gas chromatography (GC) method
EN
EN 18088:2025
En Vigor
2025-08-13
Flexible sheets for waterproofing - Plastics recycling and recycled
plastics - Plastic waterproofing sheets
EN
EN 17098-1:2025
En Vigor
2025-08-13
Plastics - Barrier films for agricultural and horticultural soil
disinfection by fumigation - Part 1: Specifications for barrier films
EN
EN ISO 377:2017/A1:2025
En Vigor
2025-08-13
Steel and steel products - Location and preparation of samples and test
pieces for mechanical testing - Amendment 1 (ISO 377:2017/Amd 1:2025)
EN
CWA 18230:2025
En Vigor
2025-08-13
Zero Defects Manufacturing - Basic Principles and Requirements
EN
HD 60364-7-706:2025
En Vigor
2025-08-08
Low-voltage electrical installations - Part 7-706: Requirements for
special installations or locations - Conducting locations with
restricted movement
EN
EN ISO 80000-8:2020/A1:2025
En Vigor
2025-08-06
Quantities and units - Part 8: Acoustics - Amendment 1 (ISO
80000-8:2020/Amd 1:2025)
EN
EN 18061:2025
En Vigor
2025-08-06
Road vehicles - Rechargeable batteries with internal energy storage -
Steps, conditions and protocols for the safe repair and re-use and
preparation for repurposing of modules and batteries designed for EV applications
EN
EN ISO 13341:2025
En Vigor
2025-08-06
Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2025)
EN
EN ISO 3035:2025
En Vigor
2025-08-06
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2025)
