-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN 16263:2025-06

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges

Fecha edición: 2025-06-01
En Vigor
Idiomas disponibles: Alemán
Resumen: This document is applicable to cocks for pressure gauges for use in pressure measuring setups for liquids, gases and vapours, which have a male connection on the process side and a female connection with adjusting nut on the instrument side, as well as a test connection, for a maximum allowable pressure of 16 bar and an operating temperature range of -10 °C to +50 °C. Three design are specified: Form A: with male test connection M20 × 5; Form B: with round test flange 40 × 5; Form C: with narrow test flange 60 × 25. This document does not specify sealing washers; for these DIN EN 837-1 applies.
Keywords: Clamp units|Design|Designations|Dimensions|Journal connections|Marking|Materials|Measurement circuits|Measuring instruments|Mortice-and-tenon joints|Operating position|Pipe threads|Pressure gauges|Pressure measurement (fluids)|Pressure tests|Shut-off valves|Sleeve joints|Spigot-and-socket joints|Stop valves|Stopcocks|Taps|Temperature|Temperature-measuring instruments|Test connections|Thread forms|Thread-connections|Threads
ICS: 23.060.20 - Válvulas de obturador esférico y giratorio
CTN:

Reemplazo Normas

Reemplaza a DIN 16263:2004-07

Reemplaza a DIN 16263:2024-01

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas

Más información