-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN 12814-4:2018-08

Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2018+AC:2018

Fecha edición: 2018-08-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This European Standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and also the conditions for performing the peel test perpendicular to the weld in order to determine the peel resistance and the failure behaviour. A peel test may be used in conjunction with other tests (e. g. tensile creep, macroscopic examination, etc.) to assess the performance of welded assemblies, made from thermoplastics materials. Peel tests are applicable to overlap welded assemblies made from thermoplastics materials. The T-peel test as defined in Clause 5 will be used only for assessing welded sheet assemblies. This test is not applicable to welded test pieces containing sheets of different nominal thickness. The decohesion test as defined in Clause 6 will be used only for assessing electrofusion joints with nominal thickness of pipe/fitting greater than 10 mm. For socket fusion and for electrofusion socket joints with nominal outside diameter less than or equal to 90 mm, a crush test will be used, as defined in Clause 7. The crush test can also be used for electrofusion joints with outside diameters greater than 90 mm. The crush test for electrofusion saddle joints will be performed in accordance with ISO 13955 [6]. NOTE A decohesion test is also defined in ISO 13954 [5]. The tests defined in this standard should not be used for assessment and/or qualification of thermoplastics fittings, e. g. polyethylene fittings according to EN 1555-3 [1] and EN 12201-3 [2], because they already have their own requirements.

Keywords: Crushing tests|Definitions|Dimensions|Materials|Peeling tests|Plastics|Properties|Sampling methods|Semi-finished products|Specification (approval)|Specimen preparation|Testing|Thermoplastic|Thermoplastic polymers|Weld seam testing|Welded joints|Welding|Welding engineering|Welds
ICS: 25.160.40 - Uniones soldadas y soldaduras
CTN:

Equivalencia Internacional

Idéntica EN 12814-4:2018/AC:2018

Reemplazo Normas

Reemplaza a DIN EN 12814-4:2001-12

Reemplaza a DIN EN 12814-4:2017-02

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas