DIN EN 12814-6:2025-06
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German and English version prEN 12814-6:2025 / Note: Date of issue 2025-05-09*Intended as replacement for DIN EN 12814-6 (2000-03).
| Fecha edición: |
2025-06-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Alemán, Inglés |
| Resumen: | This document specifies the dimensions, the method of sampling and the preparation of the test specimens, also the conditions for performing the low temperature tensile test perpendicular to the weld in order to determine the low temperature tensile welding factor. A low temperature tensile test may be used in conjunction with other tests (e. g. bend, tensile creep, macro, ...) to assess the performance of welded assemblies, made from thermoplastics materials. The low temperature tensile welding factor and the appearance of the fracture surface provide a guide regarding the ductility of the joint and the quality of the work. The test is applicable to co-axial or co-planar welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced, irrespective of the welding process used. The test is not applicable for co-axial welded assemblies tubes of nominal external diameter less than 20 mm. |
| Keywords: | Definitions|Designations|Dimensions|Low temperatures|Low-temperature testing|Materials|Plastics|Sampling methods|Semi-finished products|Specimen preparation|Tensile testing|Tensile tests|Terms|Testing|Thermoplastic polymers|Weld seam testing|Welded joints|Welding|Welding engineering|Welds |
| ICS: | 25.160.40 - Uniones soldadas y soldaduras |
| CTN: |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
