-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN 12953-1:2026-01

Shell boilers - Part 1: General; German version EN 12953-1:2025

Fecha edición: 2026-01-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This document is applicable to shell boilers with volumes in excess of 2 l for the generation of steam and/or hot water at a maximum allowable pressure greater than 0,5 bar and with a temperature in excess of 110 °C. For the purpose of this document the following pressurized parts are included: the shell boiler as one entity of pressure equipment including all the pressure parts from the feedwater/hot water inlet (including the inlet valve) up to and including the steam/hot water outlet (including the outlet valve or, if there is no valve, the first circumferential weld or flange downstream of the shell boiler or if applicable the outlet header); all superheaters, economizers and interconnecting piping; additionally, the piping that is connected to the boiler involved in services such as draining, venting, desuperheating, etc., up to the first isolating valve or, if there is no valve, the first circumferential weld or flange downstream of the shell boiler or if applicable the outlet header/piping. This document does not apply to the following types of boilers and equipments: a) water-tube boilers; b) non -stationary boilers, e. g. locomotive boilers; c) thermal oil boilers; d) boilers where the main pressure housing is made of cast material; e) pumps, gaskets, etc; f) brickwork setting and insulation, etc. NOTE 1 Further information on shell boilers is given in Annex A. NOTE 2 Stainless steel boilers are covered by EN 14222:2021.

Keywords: Approval laboratories|Big boilers|Buyers|Calorifiers|CE marking|Consumer-supplier relations|Definitions|Design|Equipment|Excess pressures|General section|Heat|Hot water|Hot-water generations|Installations in need of monitoring|Kettles|Large waterspace boiler|Materials|Mathematical calculations|Operational safety|Overheating|Personnel|Persons|Pressure instruments|Pressure vessels|Responsibility|Safety|Safety engineering|Safety requirements|Specification (approval)|Steam boilers|Steam generators|Surveillance (approval)|Symbols|Tanks|Temperature measurement|Testing|Water|Water chambers|Water preheaters|Water quality
ICS: 27.060.30 - Calderas e intercambiadores de calor
CTN:

Equivalencia Internacional

Idéntica EN 12953-1:2025

Reemplazo Normas

Reemplaza a DIN EN 12953-1:2012-05

Reemplaza a DIN EN 12953-1:2024-04

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas