-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN 13022-1:2014-08

Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing; German version EN 13022-1:2014

Fecha edición: 2014-08-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in Structural Sealant Glazing (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.Only soda lime silicate glasses are taken into consideration in this European Standard. Plastic glazing is excluded from the scope of this European Standard. Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) Structural sealant glazing system. All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2011. When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

Keywords: Adhesion|All-glass construction|Building sealants|Characteristics|Construction|Definitions|Design|Dimensioning|Effects|Facade linings|Facades|Facades construction|Fitness for purpose|Flat glass|Glass|Glass products|Glazing|Mathematical calculations|Multiple glazing|Properties|Single glazing|Specification (approval)|SSGS|Structural Sealant Glazing Systems|Terminology|Thickness
ICS: 81.040.20 - Vidrio para la construcción
CTN:

Equivalencia Internacional

Idéntica EN 13022-1:2014

Reemplazo Normas

Reemplaza a DIN EN 13022-1:2010-07

Reemplaza a DIN EN 13022-1:2013-08

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas