DIN EN 14320-1:2013-04
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation; German version EN 14320-1:2013
| Fecha edición: |
2013-04-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This European Standard specifies requirements for in-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products for the insulation of building equipment and industrial installations, for example storage vessels, pipes and ducts used for the supply of fuels, oil, other liquids, hot and cold water, air and other gases. Depending on the type of foam products complying with this standard, they may have service temperature ranges which lie within the limits of ± 200 °C. This Part 1 of this European Standard is a specification for the rigid foam system before installation. Part 1 of this European Standard describes the product characteristics and it includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This European Standard does not specify the required levels of all properties that should be achieved by a product to demonstrate fitness for purpose in a particular end-use application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made rigid polyurethane or polyisocyanurate foam insulation products or in-situ products intended to be used for the insulation of buildings. This standard does not specify performance requirements for direct airborne sound insulation and acoustic absorption applications. |
| Keywords: | Ageing (materials)|Basic domestic facilities|Buildings|CE marking|Checks|Conformity assessment|Construction|Construction materials|Constructional products|Cryoprotection|Definitions|Density|Design|Designations|Energy economics|Floors|Foamed insulating material|Foamed plastics|Form of delivery|In situ|Industries|Injection method|Inspection|Insulating materials|Insulations|Low temperature insulations|Marking|Material properties|Materials testing|Measurement|Measuring techniques|Methods of manufacture|Polyurethane|Production control|Properties|Quality assurance|Rigid foams|Roofs|Selection|Service installations|Specification|Specification (approval)|Spray materials|Sprayed foam products|Surveillance (approval)|Test pieces|Test specimens|Testing|Testing devices|Thermal conductivity|Thermal insulating materials|Thermal insulation|Thermal protection|Thermal resistance |
| ICS: | 91.100.60 - Materiales para aislamiento térmico y acústico |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 14320-1:2013 |
|
Reemplazo Normas |
Reemplaza a DIN 18159-1:1991-12 Reemplaza a DIN EN 14320-1:2002-04 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
